1. Introduction
Thank you for choosing the Gerrit Cordless Tile Vibrator. This portable tool is designed to simplify and improve the efficiency of tile laying for both floor and wall tiles. Featuring a powerful motor, adjustable vibration frequencies, and a strong suction cup, it ensures precise and effortless tile placement. Please read this manual thoroughly before operation to ensure safe and effective use of the device.
2. Safety Instructions
Always observe the following safety precautions to prevent injury or damage to the device:
- Ensure the work area is clean, well-lit, and free from obstructions.
- Keep children and bystanders away while operating the tool.
- Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
- Do not operate the tool in wet conditions or near flammable liquids or gases.
- Always check the suction cup for cleanliness and integrity before use to ensure maximum suction.
- Do not exceed the maximum load capacity of 100 kg.
- Turn off and unplug the device (if applicable) before performing any maintenance or cleaning.
- Store the tool in a dry, secure place out of reach of children.
3. Package Contents
Verify that all items are present in the package:
- 1 x Gerrit Cordless Tile Vibrator
- 1-2 x Lithium-ion Battery (depending on variant purchased)
- 1 x Battery Charger
- 1 x Carrying Bag (implied by image)
- 1 x User Manual (this document)
Image 3.1: Contents of the Gerrit Cordless Tile Vibrator package, including the main unit, two batteries, a charger, and a carrying bag.
4. Product Overview
Familiarize yourself with the components of your tile vibrator.
Image 4.1: Internal view highlighting the powerful motor of the tile vibrator, indicating its robust performance.
Image 4.2: Detailed view of the control panel, showing the gear display for vibration intensity, the FM Gear button for adjustment, and the FM Switch button for activation.
Image 4.3: View of the enlarged suction cup, demonstrating its strong adsorption capacity for secure tile handling.
5. Setup
5.1 Battery Charging
Before first use, fully charge the lithium-ion battery.
- Connect the charger to a power outlet.
- Insert the battery into the charger.
- Allow approximately 6 hours for a full charge. The charger indicator light will change when charging is complete.
- Once charged, disconnect the battery from the charger and unplug the charger from the outlet.
Image 5.1: Representation of the high-quality, large capacity lithium battery, emphasizing its long endurance for extended use.
5.2 Battery Installation
- Ensure the tile vibrator is turned off.
- Align the charged battery with the battery slot on the handle of the tile vibrator.
- Slide the battery into the slot until it clicks securely into place.
- To remove, press the battery release button (if present) and slide the battery out.
6. Operating Instructions
6.1 Preparing for Tiling
- Ensure the tile surface and the suction cup are clean and free of dust or debris.
- Apply tile adhesive to the floor or wall as per standard tiling practices.
6.2 Placing and Vibrating Tiles
- Position the tile vibrator's suction cup firmly onto the tile surface.
- Press the suction cup lever (if applicable) or apply downward pressure to create a strong vacuum seal. The self-locking handle will automatically lock when fully pulled out, maintaining suction.
- Carefully lift and place the tile onto the adhesive.
- Once the tile is in position, press the "FM Switch" button to activate the vibration function.
- Adjust the vibration frequency using the "FM Gear" button or rotary knob. There are 5 adjustable speeds to suit different tile sizes and adhesive consistencies. The gear display will show the current setting.
- Move the vibrator across the tile surface to ensure even distribution of adhesive and removal of air bubbles.
- To slightly correct the position of a tile, challenge the handle, pull the tile out, and adjust it in all directions.
- When finished, release the suction by pressing the release mechanism or by gently tilting the tool.
Image 6.1: Examples of various applications for the tile vibrator, including wall tiling, floor tiling, bathroom tile installation, and TV background tile work.
Image 6.2: A visual comparison illustrating the efficiency of machine tile laying with the Gerrit vibrator versus traditional manual methods, highlighting ease of use and reduced effort.
7. Maintenance
7.1 Cleaning
- After each use, wipe down the tool, especially the suction cup, with a damp cloth to remove any adhesive residue or dust.
- Do not use harsh chemicals or abrasive cleaners, as they may damage the tool.
- Ensure the suction cup is completely clean and dry before storage to maintain its effectiveness.
7.2 Storage
- Store the tile vibrator and its accessories in the provided carrying bag.
- Keep the tool in a cool, dry place, away from direct sunlight and extreme temperatures.
- If storing for an extended period, ensure batteries are partially charged (around 50%) to prolong their lifespan.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery not charged or not properly installed. | Ensure battery is fully charged and securely inserted. |
| Weak suction. | Suction cup or tile surface is dirty; suction cup is damaged. | Clean both surfaces thoroughly. Inspect suction cup for damage and replace if necessary. Ensure firm pressure is applied when engaging suction. |
| Vibration is weak or inconsistent. | Low battery charge; motor obstruction. | Recharge the battery. Check for any visible obstructions around the vibration mechanism. |
| Tile not adhering properly after vibration. | Insufficient adhesive; incorrect vibration frequency; air bubbles trapped. | Ensure adequate adhesive coverage. Adjust vibration frequency. Move the vibrator across the tile to remove air bubbles. |
9. Specifications
| Feature | Detail |
|---|---|
| Product Name | Cordless Tile Laying Machine |
| Absorption Capacity | ≤100 kg |
| Battery Voltage | 21V |
| Vibration Adjustment | 5-speed adjustment |
| Battery Capacity | 8000mAh |
| Head Material | Thick aluminum alloy |
| Maximum Vibration Frequency | 19,000 rpm |
| Applicable Tiles | 60-120cm (0.6m to 1.2m) |
| Charging Time | 6 hours |
| Product Weight | 1.5 kg |
| Usage Time (per battery) | 6-8 hours (when fully charged) |
10. Warranty and Support
Gerrit products are manufactured to high quality standards. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer.
If you encounter any problems or have suggestions regarding your Gerrit Cordless Tile Vibrator, please contact our customer support. We are committed to providing assistance within 24 hours.
Contact information is typically provided by the seller or on the product packaging.
