OLEVS 9999
OLEVS 9999 Series Women's Chronograph Quartz Watch User Manual
Model: 9999 | Brand: OLEVS
Introduction
This manual provides detailed instructions for the OLEVS 9999 Series Women's Chronograph Quartz Watch. Please read this guide thoroughly to understand the watch's features, proper operation, and maintenance procedures. This watch combines stainless steel and ceramic materials with a precise quartz movement, offering chronograph functionality and water resistance suitable for daily use.

Figure 1: OLEVS 9999 Series Watch with strap adjustment tool.
Setup and Initial Adjustment
1. Adjusting the Watch Strap
The watch comes with a strap adjustment tool to customize the fit. To adjust the strap length:
- Identify the pins on the inside of the strap links.
- Use the provided tool to push out the pins from the links you wish to remove.
- Remove the desired number of links to achieve a comfortable fit.
- Reinsert the pins to secure the strap.

Figure 2: Detail of the watch bracelet, showing link construction.
2. Setting the Time and Date
Refer to the "Operating Instructions" section for detailed steps on setting the time and date.
Operating Instructions
1. Watch Dial Overview

Figure 3: Watch Dial Functions.
- Hour and Minute Hand: Displays the current time.
- Chronograph Second Hand: Used for timing events.
- 24-Hour Display: Indicates AM/PM for the main time.
- Calendar Window: Displays the current date.
- Crown: Used for setting time and date.
- Pushers: Used to operate the chronograph function.
2. Setting the Time
- Pull the crown out to position 2 (farthest out).
- Rotate the crown to move the hour and minute hands to the correct time. Ensure the 24-hour subdial aligns correctly for AM/PM.
- Push the crown back to position 0 (normal operating position).
3. Setting the Date
- Pull the crown out to position 1 (middle position).
- Rotate the crown to adjust the date in the calendar window.
- Push the crown back to position 0.
- Important: Avoid setting the date between 9 PM and 3 AM, as this can damage the movement. If the time falls within this period, adjust the time outside this range first, set the date, then reset the time.
4. Using the Chronograph Function
The chronograph allows for precise timing of events.
- Start: Press the top pusher to start the chronograph. The chronograph second hand will begin to move.
- Stop: Press the top pusher again to stop the chronograph. The elapsed time will be displayed.
- Reset: Press the bottom pusher to reset the chronograph hands to zero.
5. Luminous Function
The watch features a high-definition luminous coating on the hands and markers, allowing for readability in low-light conditions after exposure to light.

Figure 4: Luminous display in low light.
Care and Maintenance
1. Water Resistance
This watch is water resistant to 30 meters (3 ATM), meaning it can withstand splashes, rain, and brief immersion. It is suitable for daily use such as hand washing or light rain exposure.
- Do NOT operate the crown or pushers while the watch is wet or submerged.
- Do NOT expose the watch to hot water, steam, or extreme temperature changes (e.g., hot showers, saunas), as this can compromise the seals.
- After exposure to saltwater, rinse the watch with fresh water and dry thoroughly with a soft cloth.

Figure 5: Water resistance for daily activities.
2. Cleaning
To maintain the appearance of your watch:
- Wipe the case and strap regularly with a soft, dry cloth.
- For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly.
- Avoid using harsh chemicals, solvents, or abrasive cleaners.
3. Storage
When not wearing the watch, store it in a cool, dry place, away from direct sunlight and strong magnetic fields.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not running or running intermittently. | Battery depleted. | Replace the battery. Consult a professional watch repair service. |
| Time is inaccurate. | Incorrect time setting; exposure to strong magnetic fields. | Reset the time. Keep the watch away from strong magnets. If the issue persists, a professional inspection may be required. |
| Date does not change at midnight. | Time is set for AM instead of PM, or vice-versa. | Advance the time by 12 hours. Ensure the 24-hour subdial indicates the correct AM/PM. |
| Chronograph hands do not reset to zero. | Requires calibration. | Consult a professional watch repair service for calibration. |
| Strap clasp opens unexpectedly. | Clasp mechanism may be bent or worn. | Inspect the clasp for damage. If bent, gently adjust. If worn, consider professional repair or replacement. |
Specifications
| Model Number | CAN-XLY-S-L9999 |
| Brand | OLEVS |
| Movement | Quartz |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel & Ceramic |
| Dial Window Material | Reinforced Mineral Glass |
| Water Resistance | 30 Meters (3 ATM) |
| Functions | Time (Hour, Minute, Second), Chronograph, 24-Hour Display, Date Display, Luminous Hands/Markers |
| Product Dimensions | 19 x 3.5 x 1 cm |
| Item Weight | 120 g |
Warranty and Support
Warranty Information
This product is covered by a 30-day free return policy. For specific warranty details beyond this period, please refer to the documentation provided with your purchase or contact customer support.
Customer Support
Should you encounter any issues or require assistance with your OLEVS watch, please contact the seller directly for support. They are equipped to provide guidance and solutions for product-related concerns.
For general inquiries or to explore other OLEVS products, you may visit the official OLEVS store on Amazon: OLEVS Store.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
