Introduction
This manual provides detailed instructions for the Focket 22-inch Articulating Friction Magic Arm. This versatile accessory is designed to securely mount various devices such as DSLR cameras, LCD monitors, LED lights, and cell phones, offering flexible positioning for diverse applications. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.
Product Overview
The Focket Articulating Friction Magic Arm is constructed from durable aluminum alloy, featuring a 22-inch length for extended reach and flexible positioning. It incorporates universal 1/4-inch screws on both ends for broad compatibility with various photographic and video accessories. The arm's design allows for multi-angle adjustments, including 360-degree rotation of the arm and 180-degree rotation of the ballheads, secured by a reliable knob locking mechanism.
Image: The Focket 22-inch Articulating Friction Magic Arm shown with examples of mounted equipment like cameras, microphones, and ring lights, demonstrating its versatility.
Key Features
- 22-Inch Length: Provides extended reach and flexible positioning for cameras, monitors, and other accessories.
- Universal 1/4-inch Screws: Equipped with standard 1/4-inch screws on both ends for wide compatibility with various devices.
- Multi-Angle Adjustment: The arm rotates 360 degrees, and the ballheads rotate 180 degrees, allowing for precise and flexible adjustments. Ballheads include a damping ring for enhanced stability.
- All Aluminum Construction: Made from durable aluminum alloy, ensuring sturdiness, strength, and resistance to oxidation.
- Secure Locking Mechanism: Features a knob locking mechanism for quick installation and a secure hold, complemented by a spring positioning pin to prevent accidental loosening.
Image: Illustration demonstrating the multi-angle adjustment capabilities, including the 360-degree rotation of the arm and 180-degree rotation of the ballheads.
Image: Detailed view highlighting the secure locking knob mechanism and the robust all-aluminum construction of the articulating arm.
Setup and Installation
- Unpack Components: Carefully remove the articulating arm from its packaging. Ensure all parts are present.
- Identify Connection Points: Locate the 1/4-inch screws on both ends of the articulating arm.
- Attach to Mounting Point: Screw one end of the articulating arm onto your desired mounting point (e.g., camera cage, tripod, clamp) using the 1/4-inch screw. Turn the red knob clockwise to tighten and secure the connection.
- Attach Device: Screw your device (e.g., camera, monitor, LED light, phone clamp) onto the 1/4-inch screw at the other end of the articulating arm. Turn the red knob clockwise to tighten and secure the device.
- Verify Stability: Before use, gently test the stability of the mounted device and the arm to ensure all connections are secure.
Image: A close-up view of the 1/4-inch screw and ballhead mechanism, illustrating the connection point for devices.
Operating Instructions
- Adjusting the Arm Angle: To change the angle of the articulating arm, loosen the central red knob by turning it counter-clockwise. Adjust the arm to the desired position.
- Adjusting Ballhead Angle: Each ballhead can be rotated 180 degrees. Loosen the corresponding red knob to adjust the angle of the attached device.
- Securing the Position: Once the desired angle and position are achieved, tighten all red knobs by turning them clockwise until the arm and ballheads are securely locked in place. Do not overtighten.
- Fine-Tuning: The damping ring within the ballhead provides enhanced stability and allows for precise fine-tuning of the device's orientation.
Image: A user demonstrating the articulation of the arm to position a device, highlighting its flexibility.
Maintenance
- Cleaning: Wipe the arm with a soft, dry cloth to remove dust and dirt. For stubborn marks, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid abrasive cleaners or solvents.
- Inspection: Regularly inspect all screws, knobs, and joints for any signs of wear or loosening. Tighten as necessary.
- Storage: Store the articulating arm in a clean, dry environment away from extreme temperatures and direct sunlight when not in use.
- Lubrication: No lubrication is typically required for the friction joints. If movement becomes stiff, ensure no debris is obstructing the mechanism.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Arm does not hold position | Knobs are not tightened sufficiently. | Ensure all red knobs are tightened firmly clockwise. Do not overtighten. |
| Device feels wobbly | Device or arm not securely attached. | Check that both the arm to mount and device to arm connections are fully tightened. |
| Difficulty adjusting arm/ballhead | Knobs are too tight or debris in joint. | Loosen knobs slightly. Inspect joints for any foreign objects and clean if necessary. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | Focket9egnz21pw7 |
| Length | 22 inches (approx. 561mm) |
| Material | Aluminum Alloy |
| Interface | Universal 1/4-inch Screw (both ends) |
| Ballhead Rotation | 180 degrees |
| Arm Rotation | 360 degrees |
| Item Weight | 12.2 ounces |
| Package Dimensions | 11.81 x 3.15 x 2.36 inches |
Image: The Focket Articulating Arm with a measurement indicating its 22.1-inch (561mm) length.
Contact and Support
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Focket website.