Introduction
This manual provides essential instructions for the assembly, operation, and maintenance of your Vente-unique DESADO Storage Bed with Nightstands and LEDs. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
Safety Information
- Ensure all components are present and undamaged before assembly.
- Assembly should be performed by at least two adults.
- Use only the provided hardware. Do not substitute parts.
- Do not overtighten screws during assembly to avoid damaging the material.
- Keep small parts away from children during assembly.
- The maximum weight recommendation for the bed is 120 kg.
- The maximum load for each nightstand drawer is 2 kg.
- The maximum load for each nightstand surface is 2 kg.
- Ensure the bed is placed on a flat, stable surface.
- For LED lighting, ensure the power supply is compatible with local electrical standards.
Setup and Assembly
The Vente-unique DESADO bed requires assembly. It is recommended to have two people for this process. All necessary hardware is included. Please follow the step-by-step instructions provided in the separate assembly guide (usually included in the packaging).
Key Assembly Points:
- Unpacking: Carefully unpack all components and verify against the parts list.
- Frame Assembly: Assemble the main bed frame using the provided screws and connectors.
- Nightstand Integration: Attach the integrated nightstands to the headboard structure.
- Storage Mechanism: Install the gas lift mechanism for the storage compartment. Ensure it operates smoothly.
- Slat Base Installation: Place the slat base securely within the bed frame.
- LED Installation: Connect the LED strips to the designated areas on the headboard and plug into the power supply.
- Mattress Placement: Once the frame is fully assembled, place the 160x200 cm mattress onto the slat base.
Image: The DESADO bed with its storage compartment open, revealing the slat base and internal storage space. A mattress is shown separately below.
Image: The fully assembled DESADO bed in a bedroom, showcasing the integrated nightstands and headboard design.
Operating Instructions
Storage Compartment:
To access the storage compartment, gently lift the mattress and slat base from the foot end of the bed. The gas lift mechanism will assist in holding the bed base in an open position. To close, gently push down until the base is fully lowered.
Image: The bed with the mattress and slat base lifted, providing access to the under-bed storage area.
Integrated Nightstands:
The bed features two integrated nightstands with sliding drawers. To open a drawer, gently pull the front panel. To close, push until it is flush with the nightstand frame. Do not overload the drawers; each drawer has a maximum load capacity of 2 kg.
Image: A close-up of the integrated nightstand with its sliding drawer partially open.
LED Lighting:
The LED lighting system is controlled by an integrated switch. Plug the bed's power cord into a standard wall outlet. Use the switch to turn the LEDs on or off. The LEDs provide a white light ambiance.
Image: The DESADO bed with its integrated LED lighting illuminated, creating a soft glow behind the headboard.
Care and Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Dusting: Regularly dust all surfaces to prevent buildup.
- Hardware Check: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary, but do not overtighten.
- LEDs: The LED lights are designed for long life. If a light fails, contact customer support for assistance. Do not attempt to replace individual LEDs.
- Mattress Care: Refer to the separate mattress care instructions for specific cleaning and maintenance guidelines for the AMBRACIE mattress.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels unstable or wobbly. | Loose fasteners. | Check and tighten all screws and bolts. Ensure the bed is on a level surface. |
| Storage mechanism is difficult to lift or close. | Mechanism not properly installed or obstructed. | Verify the gas lift mechanism is correctly installed according to the assembly guide. Ensure no items are obstructing the movement. |
| LED lights do not turn on. | Power cord unplugged, switch off, or faulty connection. | Ensure the power cord is securely plugged into a working outlet. Check the LED switch. Verify all LED connections are secure. |
| Nightstand drawer sticks or doesn't slide smoothly. | Drawer runners misaligned or obstructed. | Check for any obstructions in the drawer runners. Ensure the drawer is correctly seated on its tracks. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Name | DESADO |
| Brand | Vente-unique |
| Bed Dimensions (L x W x H) | 245.2 cm x 208.8 cm x 115.6 cm |
| Sleeping Surface | 160 x 200 cm |
| Material | Particle board with Melamine finish |
| Color | Natural and White |
| LED Power | 12 W |
| LED Control | Switch |
| Integrated Nightstands | Yes, with 2 sliding drawers |
| Storage Type | Under-bed storage compartment with gas lift mechanism |
| Mattress Included | Yes, AMBRACIE classic mattress (160x200 cm) |
| Mattress Technology | Pocket springs (580 springs), comfort foam (23 kg/m³) |
| Maximum Bed Weight Capacity | 120 kg |
| Maximum Nightstand/Drawer Load | 2 kg per drawer / 2 kg per nightstand surface |
| Product Weight | 157.1 kg |
Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or visit the official Vente-unique website. For customer support, assembly assistance, or to report missing/damaged parts, please contact Vente-unique customer service directly. Contact details can typically be found on the brand's website or your purchase invoice.
Vente-unique Customer Service: Please refer to your purchase receipt or the Vente-unique website for current contact information.
