1. Product Overview
The Vente-unique JUVISIA bed is designed to enhance comfort and functionality in your bedroom. This bed frame features integrated storage solutions, including nightstands with drawers and shelves, and built-in LED lighting. It is compatible with 160 x 200 cm mattresses and includes an AMBRACIE classic mattress.
Figure 1: Fully assembled JUVISIA bed with integrated nightstands and LED lighting.
2. Safety Instructions
Please read and understand all safety instructions before assembling or using the bed. Failure to follow these instructions may result in injury or damage to the product.
- Assembly: Always assemble the bed with at least two adults. Ensure all parts are correctly aligned and securely fastened before use.
- Weight Limits: Do not exceed the maximum load capacity for drawers (2 kg), shelves (2 kg), or nightstands (2 kg).
- LED Lighting: The LED system operates on 12V. Do not attempt to modify the electrical components. Connect only to a standard electrical outlet.
- Children: Keep small parts away from children during assembly. Do not allow children to play on or around the bed's storage mechanisms unsupervised.
- Stability: Ensure the bed is placed on a flat, stable surface.
- Moving the Bed: When moving the bed, lift it rather than dragging to prevent damage to the frame and floor.
3. Setup and Assembly
This bed requires assembly. It is recommended to have two people for the assembly process. Ensure you have sufficient space and all components are present before starting.
3.1. Unpacking and Component Check
- Carefully unpack all boxes and lay out the components on a clean, soft surface to prevent scratches.
- Verify all parts listed in the included hardware and parts list are present. Contact customer support immediately if any parts are missing or damaged.
3.2. Bed Frame Assembly
- Begin by assembling the main bed frame structure using the provided screws and connectors. Ensure all connections are tight.
- Attach the headboard and footboard to the side rails.
- Install the central support beam and any additional support legs for the mattress foundation.
3.3. Storage Mechanism and Slats Installation
The bed features a lift-up slat system for access to under-bed storage.
Figure 2: Bed frame with mattress foundation lifted, showing storage access.
- Assemble the slat frame according to the instructions.
- Attach the hydraulic lift mechanism to the bed frame and the slat frame. Ensure the mechanism is securely fastened and operates smoothly.
- Place the wooden slats into the designated holders on the slat frame.
3.4. Nightstands and LED Installation
- Assemble the drawers and shelves for the integrated nightstands.
- Attach the nightstand units to the headboard as indicated in the assembly guide.
- Install the LED light strips into the designated channels on the headboard.
- Connect the LED power cable to the 12V transformer and then to a standard electrical outlet.
3.5. Mattress Placement
Figure 3: Included AMBRACIE classic mattress.
Once the bed frame and slat system are fully assembled, carefully place the 160 x 200 cm mattress onto the slat foundation.
4. Operating Instructions
4.1. Using the Storage Compartment
- To access the under-bed storage, gently lift the mattress foundation from the foot end of the bed. The hydraulic mechanism will assist in lifting and holding the foundation in place.
- To close, gently pull the mattress foundation down until it rests securely on the bed frame.
- The integrated nightstands feature two drawers and two open shelves. Pull the drawers gently to open and push to close.
4.2. Operating the LED Lighting
The integrated LED lighting is controlled by a switch. Locate the switch, typically on the headboard or near the power connection, to turn the lights on or off.
5. Maintenance and Care
- Cleaning the Frame: Wipe the bed frame surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the melamine finish.
- Mattress Care: The AMBRACIE mattress is reversible. Rotate and flip the mattress periodically (e.g., every 3-6 months) to ensure even wear and extend its lifespan. Follow specific care instructions provided with the mattress.
- LED Lights: The LED lights are designed for long life. If a light fails, contact customer support for replacement options. Do not attempt to replace individual LEDs yourself.
- Hardware: Periodically check all screws and fasteners to ensure they remain tight. Retighten as necessary to maintain stability.
- Storage Mechanism: Keep the hydraulic lift mechanism free of obstructions. Do not apply excessive force when lifting or lowering the mattress foundation.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels unstable or wobbly. | Loose fasteners or uneven floor. | Check and tighten all screws and bolts. Ensure the bed is on a level surface. |
| Storage lift mechanism is stiff or not holding. | Obstruction, damaged hydraulic piston, or incorrect assembly. | Clear any obstructions. Recheck assembly of the hydraulic pistons. If damaged, contact customer support. |
| LED lights are not working. | Power connection issue, faulty switch, or LED strip. | Ensure the power cable is securely plugged into the outlet and the transformer. Check the switch. If issues persist, contact customer support. |
| Drawers are difficult to open/close. | Overloaded, misaligned, or debris in runners. | Reduce load in drawers (max 2 kg). Check for obstructions in the runners. Realign drawers if necessary. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Vente-unique |
| Model | JUVISIA |
| Bed Dimensions (Overall) | Length: 249 cm, Depth: 223 cm, Height: 95 cm |
| Sleeping Height | 42 cm |
| Compatible Mattress Size | 160 x 200 cm |
| Material (Frame) | Chipboard (Truciolato), Melamine finish |
| Color | Light Natural, Black |
| Storage Type | Under-bed storage, 2 integrated nightstand drawers, 2 integrated nightstand shelves |
| Max Load (Drawer/Shelf/Nightstand) | 2 kg each |
| LED Lighting | White LED, 12V, Switch controlled, Electrical outlet connection |
| Included Mattress (AMBRACIE) | Technology: Pocket springs (580 springs), Comfort foam (23 kg/m³ density). Filling: Polyester fibers. Cover: Stretch fabric. Features: Reversible (summer/winter). |
| Product Weight | 156.1 kg |
| Origin | Made in Europe |
8. Warranty and Support
For warranty information, missing parts, or technical support, please contact Vente-unique customer service. Refer to your purchase documentation for specific warranty terms and contact details.
Seller: Vente-unique Italia
ASIN: B0CWV7LCB1
