Dreamaker B0CWV4PYPL

Dreamaker Electric Heated Throw Blanket User Manual

Model: B0CWV4PYPL

Important Safety Information

Please read all instructions carefully before using your Dreamaker Electric Heated Throw Blanket. Retain this manual for future reference.

Couple relaxing on a couch under a blue Dreamaker heated blanket, with SAA Approvals logo indicating safety certification.

Image: The Dreamaker Electric Heated Throw Blanket is designed with high safety standards, including overheat protection, and meets Australian safety standards, as indicated by the SAA Approvals logo.

Diagram showing the internal layers of the heated blanket's wire, including double protection insulation, insulation, heating wire, temperature sensing wire, and plastic film layer, with SAA Approvals logo.

Image: Detailed diagram illustrating the multi-layered safety design of the heating element, featuring double protection insulation and a temperature sensing wire to prevent overheating.

Product Overview

The Dreamaker Double-Sided Coral Fleece Electric Heated Throw Blanket provides luxurious warmth and comfort. Its soft coral fleece material offers a gentle, velvety texture, perfect for use on your bed, lounge, or as a standalone throw.

Rolled up blue Dreamaker electric heated throw blanket with its white detachable controller visible.

Image: The Dreamaker Electric Heated Throw Blanket, shown rolled up, highlighting its soft coral fleece texture and the attached detachable controller.

A blue Dreamaker heated blanket draped over a light-colored sofa in a living room setting.

Image: The double-sided plush fleece blanket draped over a sofa, showcasing its aesthetic appeal and readiness for use in a home environment.

Close-up view of the blue coral fleece material of the Dreamaker heated blanket, emphasizing its softness and texture.

Image: A close-up of the super soft coral fleece, illustrating the plush and luxurious texture of the blanket material.

Diagram showing the layered construction of the heated blanket, including 200gsm coral fleece layers and fast heating insulated wires for even warmth distribution.

Image: An illustration detailing the "Science of Warmth" with layers of 200gsm coral fleece and insulated wires designed for fast and even heat distribution.

Setup

  1. Unpack: Carefully remove the heated throw blanket from its packaging.
  2. Inspect: Before first use, inspect the blanket and controller for any signs of damage. Do not use if damaged.
  3. Connect Controller: Ensure the detachable controller is securely plugged into the blanket's connector.
  4. Position: Lay the blanket flat on a bed, sofa, or other desired surface. Ensure there are no folds, creases, or bunched areas that could trap heat.
  5. Plug In: Insert the power plug into a suitable electrical outlet.

Operating Instructions

The Dreamaker Electric Heated Throw Blanket features a user-friendly controller with 9 heat settings.

Close-up of the white Dreamaker controller with an LED display showing '8', and two grey buttons labeled 'ON/OFF' and 'TEMP'.

Image: The easy-to-use controller, featuring an LED display, ON/OFF button, and TEMP button for adjusting heat settings. The extra-long 2.3m cord is also visible.

A woman sitting comfortably on a couch, covered by a blue Dreamaker heated blanket, holding the white controller in her hand.

Image: A user demonstrating the comfortable use of the blanket and controller, highlighting the ease of customizing warmth with 9 heat settings.

  1. Turning On: Press and hold the "ON/OFF" button for approximately 5 seconds. The LED display will illuminate, typically starting on the fast heat setting (indicated by "H").
  2. Adjusting Heat Settings: Press the "TEMP" button to cycle through the heat settings from 1 to 8.
    • "H" (Fast Heat): Provides rapid warming.
    • "1-8": Gradual heat levels, with 8 being the warmest.
    Select your desired warmth level.
  3. Auto-Off Function: The blanket is equipped with a 3-hour auto-off function for safety and energy conservation. After approximately 3 hours of continuous operation, the blanket will automatically turn off. To resume heating, simply turn the blanket off and then on again.
  4. Turning Off: Press and hold the "ON/OFF" button for approximately 5 seconds until the LED display turns off. Unplug the blanket from the power outlet when not in use.

Maintenance and Care

Proper care will extend the life of your Dreamaker Electric Heated Throw Blanket. Always follow these instructions carefully.

A burgundy Dreamaker heated blanket being placed into a front-loading washing machine.

Image: The heated blanket being prepared for washing, demonstrating that it is machine washable after detaching the controller.

Cleaning Instructions:

  1. Disconnect Power: Ensure the blanket is unplugged from the wall outlet.
  2. Detach Controller: Carefully detach the controller from the blanket. The controller is not washable.
  3. Washing:
    • Machine Wash: Wash with like colors on a gentle cycle in cold water.
    • Hand Wash: For best results, hand wash in cold water.
  4. Drying:
    • Line dry in shade.
    • Do not spin/tumble dry.
    • Do not dry clean or iron.
  5. Reassembly: Ensure the blanket is completely dry before reattaching the controller and plugging it back into power.

Storage:

When not in use, store the blanket in a cool, dry place. Avoid placing heavy objects on top of the blanket during storage, as this may damage the internal heating elements.

Troubleshooting

If you experience issues with your Dreamaker Electric Heated Throw Blanket, please refer to the following common problems and solutions:

Problem Possible Cause Solution
Blanket does not heat up.
  • Not plugged in correctly.
  • Controller not connected securely.
  • Power outlet issue.
  • Overheat protection activated.
  • Internal malfunction.
  • Ensure power cord is fully inserted into the outlet.
  • Check that the controller is firmly connected to the blanket.
  • Test the outlet with another appliance.
  • Turn off the blanket, unplug it, wait 10-15 minutes, then plug back in and restart.
  • If issues persist, contact customer support.
Blanket turns off unexpectedly.
  • 3-hour auto-off function activated.
  • Overheat protection activated due to folding/bunching.
  • This is normal operation. Turn the blanket off and then on again to resume heating.
  • Ensure the blanket is spread flat. Turn off, unplug, wait, then restart.
Heat is uneven or localized.
  • Blanket is folded or bunched.
  • Internal heating element issue.
  • Ensure the blanket is fully spread out and flat.
  • If the problem persists after flattening, contact customer support.

If the problem cannot be resolved using the above steps, please contact Dreamaker customer support.

Specifications

Feature Detail
Model B0CWV4PYPL
Dimensions 200x180cm (for this specific variant)
Material Double-Sided Coral Fleece
Color Blue (for this specific variant)
Heat Settings 9 (Fast Heat 'H' + 8 adjustable levels)
Auto-Off Timer 3 Hours
Cord Length 2.3 meters (approx.)
Safety Features Overheat Protection, SAA Approvals (Australian Safety Standards)
Care Instructions Machine Wash (gentle cycle, cold water), Hand Wash. Detach controller before washing. Line dry in shade. Do not tumble dry, dry clean, or iron.
Item Weight 2.38 Kilograms

Warranty and Support

Dreamaker products are manufactured to high-quality standards. For any warranty claims or technical support, please contact your retailer or Dreamaker customer service directly.

Please have your product model (B0CWV4PYPL) and purchase date available when contacting support.

For more information, visit the official Dreamaker store: Dreamaker Store on Amazon AU