1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Veise VE06 Smart Deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image 1.1: Veise VE06 Smart Deadbolt with included accessories and app view.
2. Safety Information
- Do not attempt to disassemble or modify the lock. This may cause damage and void the warranty.
- Use only the specified battery type (4 AA alkaline batteries, not included). Do not mix old and new batteries or different types of batteries.
- Keep all keys and fobs in a secure location.
- Ensure the door frame is structurally sound and properly aligned before installation.
3. Package Contents
Verify that all components are present before beginning installation:
- Exterior Keypad Assembly
- Interior Assembly
- Mounting Plate
- Deadbolt Latch
- Strike Plate
- Reinforcement Plate
- 2 Physical Keys
- 2 IC Fob Cards
- Installation Screws
- Installation Instruction Manual
- Programming Quick Set Up Guide
4. Installation
4.1. Door Preparation and Compatibility Check
Before installation, ensure your door meets the following specifications:
- Door Thickness: 1-3/8" to 2" (35mm-50mm)
- Hole Diameter: 1-1/2" or 2-1/8" (38mm or 54mm)
- Backset: 2-3/8" or 2-3/4" (60mm or 70mm)
- Minimum Distance (from center of bore hole to edge of door): 4" (101.6mm)
- Bore Diameter (for latch): 1" (25mm)
The lock is compatible with standard single-cylinder deadbolts and can be installed on both left-handed and right-handed doors. It is not compatible with mortise or integrated lock systems.
Image 4.1: Door measurement and compatibility guide.
4.2. Installation Steps
Installation typically takes about 15 minutes with a screwdriver. Follow the detailed instructions provided in the included 'Installation Instruction' manual for precise steps. General steps include:
- Install the deadbolt latch into the door edge.
- Install the exterior keypad assembly, ensuring the cable passes through the door.
- Install the mounting plate on the interior side of the door.
- Connect the cable from the exterior assembly to the interior assembly.
- Attach the interior assembly to the mounting plate.
- Install the batteries (4 AA alkaline, not included).
- Install the strike plate and reinforcement plate on the door frame.
Image 4.2: The Veise VE06 Smart Deadbolt installed on a door.
5. App Setup and Pairing
5.1. Downloading the App
Search for the 'DDLock' app in your smartphone's app store (iOS or Android) and download it.
5.2. Initial Lock Activation and Pairing
- Activate the door lock by touching the keypad.
- Open the DDLock app and create an account.
- Tap 'Add Lock' and select 'Deadbolt'.
- Follow the on-screen instructions to pair the lock via Bluetooth. Ensure your phone's Bluetooth is enabled and you are within close proximity to the lock.
Important Note: Do not change the Master Password on the keypad before pairing with the app. The app will generate a new master code for you, which can be changed later within the app.
Image 5.1: DDLock app interface for smart lock control.
5.3. Web Portal Management
The Veise VE06 Smart Deadbolt also supports management via a web portal. Visit the DDLock website to manage users, generate eKeys, and view access logs from any web browser.
Image 5.2: DDLock web portal and app for comprehensive lock management.
6. Operation
6.1. Unlocking Methods
- App Control: Open the DDLock app and tap the unlock icon for your specific lock.
- Passcode: Enter your valid passcode on the keypad, then press '#'.
- IC Fob Card: Present the IC fob card to the designated sensor area on the keypad.
- Physical Key: Use the provided physical key as a traditional backup.
- Thumb Turn: Manually rotate the thumb turn on the interior assembly.
Image 6.1: Multiple ways to unlock the Veise VE06 Smart Deadbolt.
6.2. Locking Methods
- Auto-Lock: Configure the auto-lock delay (5-900 seconds) via the app. The lock will automatically engage after the set time.
- One-Touch Lock: Press and hold the '#' button on the keypad for 2 seconds.
- App Control: Press and hold the lock button in the DDLock app for 2 seconds.
- Thumb Turn: Manually rotate the thumb turn on the interior assembly.
Image 6.2: Auto-lock and one-touch lock features for enhanced security.
6.3. Generating eKeys and Passcodes
The DDLock app allows you to generate various types of access credentials:
- Timed Passcodes: Set a specific start and end time for access.
- One-Time Passcodes: Valid for a single use.
- Recurring Passcodes: Valid for specific days/times on a recurring basis.
- Custom Passcodes: Create permanent passcodes for regular users.
Image 6.3: Generating eKeys and passcodes via the DDLock app.
7. Advanced Features (with Veise G2 Gateway)
To enable remote control and smart home integration, the Veise G2 WiFi Gateway (sold separately) is required.
7.1. Remote Control
With the G2 Gateway, you can control your lock from anywhere via the DDLock app, allowing you to unlock/lock your door remotely.
Image 7.1: Real-time access logs and remote control via the app with G2 Gateway.
7.2. Voice Control Integration
The G2 Gateway enables compatibility with Amazon Alexa and Google Home, allowing for voice commands to lock or unlock your door.
Image 7.2: Voice control with Alexa and Google Home via Veise G2 Gateway.
8. Maintenance
8.1. Battery Replacement
The lock will provide low battery alerts through the app and an indicator light on the keypad when battery power is at 15%. Replace all four AA alkaline batteries promptly to ensure continuous operation.
Image 8.1: Low battery alert notification on the DDLock app.
8.2. General Care
Clean the keypad and lock body with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
9. Troubleshooting
- App Cannot Find/Connect to Lock: Ensure Bluetooth is enabled on your phone and you are close to the lock. Activate the lock by touching the keypad. If issues persist, reset the lock (refer to the quick setup guide for reset instructions).
- Keypad Not Responding: Check battery levels. Replace batteries if low.
- Anti-Cracking Feature: If an incorrect code is entered 5 times, the lock will temporarily disable the keypad for 2 minutes to prevent unauthorized access. Wait for the lockout period to expire before trying again.
- Anti-Peeping Feature: You can enter random digits before or after your actual passcode to obscure it from onlookers. The lock will still recognize the correct sequence within the random digits.
Image 9.1: Explanation of anti-cracking and anti-peeping security features.
10. Specifications
| Brand | Veise |
| Model Name | VE06 |
| Lock Type | Keypad Deadbolt |
| Material | Aluminum, Zinc |
| Color | Matte Black |
| Item Dimensions (L x W x H) | 6.1 x 2.7 x 1.4 inches |
| Item Weight | 2.72 pounds |
| Power Source | 4 AA Batteries (not included) |
| Connectivity | Bluetooth, WiFi (with Veise G2 Gateway) |
| Control Method | App, Keypad, Fob, Key, Thumb Turn |
| Special Features | App Control, Ekeys, Web Portal Management, Touchscreen Keypad, Remote Control (with G2 Gateway), Alexa/Google Compatible (with G2 Gateway), Auto-Lock, One-Touch Locking, Privacy Mode, Low Battery Alerts, Anti-Peeping, Anti-Hacking |
11. Warranty and Support
The Veise VE06 Smart Deadbolt comes with at least a one-year warranty. For technical assistance or support, please contact Veise customer service:
- Online Phone Support: Monday-Friday, 9 AM - 5 PM PST
- Email Service: 24 hours after-sales email support
Refer to your product packaging or the official Veise website for the most current contact information.
