Important Safety Instructions
Read all instructions before using this heater. Failure to follow these instructions may result in fire, electric shock, or injury to persons.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not use outdoors.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater includes a Patented Safer Plug® fire prevention technology. This technology monitors the temperature of the plug to prevent overheating. Should the plug temperature rise above safe levels, the plug will immediately shut off.
Product Overview
The Duraflame Electric Oscillating Infrared Quartz Tower Heater provides supplemental zone heating for areas up to 1,000 square feet. Its design incorporates wood veneers and a curved front, making it a functional and aesthetic addition to various indoor spaces.
Image: Front view of the Duraflame Electric Tower Heater, showcasing the control panel and infrared heating elements.
Key Features:
- Infrared Quartz Heat: Provides efficient supplemental heating.
- Oscillating Function: Distributes heat evenly across a wider area.
- Safer Plug® Technology: Monitors plug temperature to prevent overheating.
- Electronic Timer: Customizable timer settings from 30 minutes to 9 hours, including a sleep timer.
- Elegant Design: Features wood veneers and a curved front.
- No Assembly Required: Unit comes fully assembled.
Package Contents
Verify that all components are present before proceeding with setup.
- Duraflame Electric Tower Heater Unit
- Remote Control (with 2 AAA batteries included)
- User Manual (this document)
Setup and Placement
The heater comes fully assembled. Follow these guidelines for safe and effective placement.
- Unpacking: Carefully remove the heater and all accessories from the packaging. Retain packaging for future storage or transport.
- Placement:
- Place the heater on a firm, level surface.
- Ensure there is at least 3 feet (0.9 m) of clear space around the front, sides, and rear of the heater from any combustible materials (e.g., furniture, curtains, bedding).
- Do not place the heater in areas where it may be easily tipped over.
- Avoid placing the heater in high-traffic areas where it could be a tripping hazard.
- Power Connection:
- Plug the heater directly into a 120V, 60Hz grounded wall outlet.
- Do not use an extension cord, power strip, or surge protector with this heater.
- Ensure the outlet is not overloaded with other high-wattage appliances.
Image: The Duraflame Electric Tower Heater positioned in a living room, demonstrating typical placement.
Operating Instructions
Familiarize yourself with the control panel and remote control functions for optimal use.
Control Panel and Remote Functions:
Image: Close-up view of the heater's control panel, showing buttons and digital display.
| Button/Indicator | Function |
|---|---|
| Power Button (Ⓘ) | Turns the heater ON or OFF. |
| Temperature Up/Down (▲/▼) | Adjusts the desired temperature setting. |
| Oscillation Button (↻) | Activates or deactivates the oscillating function for wider heat distribution. |
| Timer Button (⏲) | Sets the automatic shut-off timer (30 minutes to 9 hours). |
| Display | Shows the current temperature setting or timer duration. |
Initial Operation:
- Plug the heater into a grounded 120V outlet.
- Press the Power Button (Ⓘ) to turn the heater ON. The display will show the default temperature or the last set temperature.
- Use the Temperature Up/Down buttons (▲/▼) to set your desired room temperature. The heater will cycle ON and OFF to maintain this temperature.
Using the Oscillation Function:
To activate the oscillation feature, press the Oscillation Button (↻) on the control panel or remote. The heater will begin to rotate from side to side, distributing heat more broadly. Press the button again to stop oscillation.
Image: Diagram illustrating the oscillating heat distribution from the heater.
Setting the Timer:
The timer function allows you to set the heater to automatically turn off after a specified period.
- While the heater is ON, press the Timer Button (⏲).
- Each press will cycle through the available timer settings (e.g., 0.5 hours, 1 hour, 1.5 hours, up to 9 hours).
- The display will show the selected timer duration. The heater will operate for this duration and then automatically shut off.
- To cancel the timer, cycle through the settings until "00" or "OFF" is displayed, or turn the heater OFF.
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater. Always unplug the heater before performing any maintenance.
Cleaning:
- Exterior: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Air Intake/Outlet: Periodically vacuum the air intake and outlet grilles to remove dust and debris. Ensure these areas are clear for proper airflow.
- Do not immerse the heater in water.
Storage:
When not in use, store the heater in a cool, dry location, preferably in its original packaging, to protect it from dust and damage.
Troubleshooting
Refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn ON. |
|
|
| No heat output or insufficient heat. |
|
|
| Oscillation not working. |
|
|
| Remote control not working. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Duraflame |
| Model Number | 5HM8000-O142D |
| Special Features | Electronic timer function, Infrared, Oscillating, Overheat Protection (Safer Plug®) |
| Color | Oak |
| Form Factor | Tower |
| Indoor/Outdoor Usage | Indoor |
| Product Dimensions | 11"D x 8"W x 22.8"H |
| Recommended Uses | Home (Bedroom, Home Office, Living Room) |
| Mounting Type | Freestanding |
| Heating Coverage | Up to 1,000 square feet |
| Fuel Type | Electric |
| Voltage | 120 Volts |
| Item Weight | 23.1 pounds |
| Manufacturer | Twin-Star International, Inc. |
| Batteries Required | Yes (2 AAA for remote, included) |
| Assembly Required | No |
Image: Visual representation of the heater's dimensions relative to an average person.
Warranty and Support
For warranty information or technical support, please contact the manufacturer, Twin-Star International, Inc. Refer to the product packaging or the manufacturer's website for the most current contact details and warranty terms.
Manufacturer: Twin-Star International, Inc.
Brand: Duraflame
Note: Keep your purchase receipt as proof of purchase for warranty claims.
