Sunco LED Shop Light Instruction Manual

1. Introduction

Thank you for choosing the Sunco LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Image 1.1: Sunco 4ft LED Shop Light

2. Safety Information

To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts, abrasions, and other hazards, please read all warnings and instructions included with and on the fixture box and all fixture labels.

• WARNING: Risk of Electric Shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
• WARNING: Risk of Fire. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
• WARNING: Risk of Injury. Wear safety glasses and gloves during installation and servicing.
• This fixture is intended for indoor use only. Do not use in wet locations or where directly exposed to water.
• This fixture is non-dimmable. Do not connect to a dimmer switch.
• Do not modify the fixture. Any modifications may void the warranty and create safety hazards.
• Ensure the supply voltage is compatible with the fixture (120V-277V).

3. Package Contents

Verify that all components are present before beginning installation:

• 2 x Sunco LED Shop Light Fixtures
• Mounting Equipment (Surface)

4. Setup and Installation

Follow these steps for a quick and easy setup. Always ensure power is disconnected at the source before proceeding.

1. Prepare Mounting Location: Identify the desired ceiling location for the fixture. Ensure the mounting surface is capable of supporting the fixture's weight.
2. Install Mounting Hardware: Use the provided mounting equipment to securely attach the fixture housing to the ceiling. Refer to Image 4.1, Step 1.
3. Connect Wires: Carefully connect the electrical wires from the power supply to the fixture's wires. Ensure proper polarity (live to live, neutral to neutral, ground to ground). Refer to Image 4.1, Step 2.
4. Secure Fixture: Once wiring is complete, snap the fixture into place, ensuring it is firmly seated against the mounting surface. Refer to Image 4.1, Step 3.

Image 4.1: Installation Steps

Daisy Chain Linkability

This fixture features daisy chain linkability, allowing multiple units to be connected for extended lighting coverage. To link fixtures, knock out the designated punch hole on the end of the fixture and connect the wires to the next unit. Ensure the total wattage of linked fixtures does not exceed the circuit's capacity.

Image 4.2: Daisy Chain Connection Point

5. Operating Instructions

The Sunco LED Shop Light is designed for simple operation and provides instant illumination upon activation.

Selectable Color Temperature (CCT)

Your fixture includes an integrated switch to select between three color temperatures: 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White). Locate the CCT switch on the fixture and slide it to your desired setting before or after installation. The light will turn on instantaneously at the selected color temperature.

Image 5.1: Selectable CCT Options

6. Maintenance

The Sunco LED Shop Light is designed for long-lasting performance with minimal maintenance.

• Cleaning: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or optical components.
• LEDs: The integrated LED light source is designed for a long lifespan (50,000 hours) and is not user-replaceable.

7. Troubleshooting

If you experience issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:

8. Specifications

9. Warranty and Support

Sunco Lighting stands behind the quality of its products.

• Warranty: This product is backed by a 3-Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
• Customer Support: For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable support specialists are available to assist you.