DWVO L Shaped Desk with Lift Top Instruction Manual

Important Safety Information

Always assemble the desk on a stable, level surface. Ensure the desk is properly anchored to the floor to prevent tipping. Be cautious when using the lift top mechanism to avoid injury. This desk is intended for adult use only.

Product Overview

The DWVO L Shaped Desk with Lift Top is designed for home and office use, offering a versatile workspace with ergonomic features. This desk includes a double desk configuration, a lift top section for standing work, a file drawer, a corner monitor stand, a printer stand, and open storage shelves.

Image: Full view of the DWVO L Shaped Desk, highlighting its spacious design and integrated features.

Key Features:

• Adjustable Lift Top: Allows transition between sitting and standing positions to reduce working stress and promote better posture.
• Integrated File Drawer: Features adjustable hanging bars suitable for A4 and letter-size documents.
• Corner Monitor Stand: Helps in maintaining a correct posture and reduces neck and back pain.
• Ample Workspace: Two large tabletops (65"x19.7" & 51.2"x15.7") accommodate multiple monitors and tasks.
• Durable Construction: Built with a 0.98" metal frame and 0.59" thick P2 particle board for stability and longevity.
• Adjustable Feet Pads: 8 adjustable feet pads ensure stability on uneven ground and protect floors from scratches.

Components List

Before assembly, please verify that all components listed below are present and undamaged.

• 1 x L Shaped Desk (various panels and frame parts)
• 1 x Packet of Fittings (screws, bolts, nuts, etc.)
• 1 x Instructions Manual (this document)

Setup Instructions

Assembly of the DWVO L Shaped Desk is designed to be straightforward. Follow the numbered steps provided in the included assembly guide. It is recommended to assemble the desk with two people for easier handling of larger components.

General Assembly Steps:

1. Unpack and Identify Parts: Lay out all components and hardware. Compare them against the components list and diagrams in the separate assembly guide.
2. Assemble the Metal Frame: Connect the metal frame pieces using the provided screws and tools. Ensure all connections are secure but do not fully tighten until all frame parts are in place.
3. Attach Desk Panels: Secure the P2 particle board desk panels to the assembled metal frame. Pay attention to the orientation of the lift top section and the file drawer housing.
4. Install File Drawer: Assemble the file drawer according to the instructions and install it into its designated slot. Ensure the drawer glides smoothly.
5. Attach Monitor Stand: Secure the corner monitor stand to the desk surface.
6. Final Tightening: Once all parts are in place and aligned, fully tighten all screws and bolts.
7. Adjust Leveling Feet: Place the desk in its desired location and adjust the 8 feet pads to ensure the desk is stable and level on uneven floors.

Image: Product dimensions for planning your space and assembly.

Operating Instructions

Using the Lift Top Mechanism:

The left tabletop section of the desk is equipped with a lift mechanism, allowing you to easily transition from a sitting to a standing work position. To operate:

1. To Lift: Gently pull the front edge of the left tabletop upwards. The spring mechanism will assist in lifting the surface to a comfortable standing height.
2. To Lower: Apply gentle downward pressure on the tabletop while guiding it back into the seated position. Ensure no objects are obstructing the mechanism.

Image: Illustration of the lift top in action, promoting sit-to-stand work.

Using the File Drawer:

The integrated file drawer is designed to store A4 and letter-size documents. It features adjustable hanging bars for organized filing.

1. To Insert Files: Place your hanging file folders onto the adjustable bars inside the drawer.
2. Adjusting Bars: The hanging bars can be repositioned to accommodate different file sizes (A4 or Letter). Refer to the assembly guide for specific adjustment instructions if needed.

Image: Detailed view of the file drawer and its adjustable hanging bars.

Using the Monitor Riser:

The corner monitor stand provides an elevated surface for your monitor, helping to raise your screen to eye level and improve ergonomic posture.

• Place your monitor directly on the riser.
• Ensure the monitor is centered and stable on the riser.

Maintenance

Proper care and maintenance will extend the life and appearance of your DWVO L Shaped Desk.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the laminated finish.
• Spills: Clean up spills immediately to prevent staining or damage to the wood particle board.
• Hardware: Periodically check and tighten all screws and bolts to ensure the desk remains stable.
• Lift Mechanism: Keep the lift mechanism free of dust and debris. Do not apply excessive force when raising or lowering the top.
• Weight Capacity: Do not overload the desk surfaces or shelves beyond their intended weight capacity to prevent structural damage.

Troubleshooting

If you encounter issues with your DWVO L Shaped Desk, refer to the following common solutions:

• Desk Wobbles: Ensure all screws and bolts are securely tightened. Adjust the leveling feet on the bottom of the desk legs to compensate for uneven flooring.
• Lift Top Sticks or is Difficult to Operate: Check for any obstructions in the mechanism. Ensure the desk is on a level surface. If the issue persists, contact customer support.
• Drawer Does Not Slide Smoothly: Verify that the drawer is correctly installed on its glides. Check for any debris in the drawer tracks. Ensure the drawer is not overloaded.
• Missing Parts: If any parts were missing upon delivery, please contact customer support with your purchase details.

Specifications

Warranty and Support

DWVO is committed to providing quality products and customer satisfaction. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For any problems, questions, or assistance with assembly or product operation, please feel free to email our customer support team. We aim to provide a quick and reasonable reply to all inquiries.

Contact Support: Please refer to your purchase documentation or the DWVO official website for the most current customer service contact information.