iGear Desklite Pro LED Table Lamp iG-1072 User Manual

Introduction

Thank you for choosing the iGear Desklite Pro LED Table Lamp. This rechargeable lamp is designed for study and office use, featuring a time and date display, three light modes (Warm, Neutral, and Cool), and intuitive touch controls. Its foldable design and wooden texture finish offer both functionality and aesthetic appeal.

Please read this manual thoroughly before operating the device to ensure proper use and to maximize its lifespan.

Package Contents

• iGear Desklite Pro LED Table Lamp (iG-1072)
• Power Cable (USB Type-C)

Product Overview

Image: The iGear Desklite Pro LED Table Lamp, showcasing its sleek design and wooden texture in a typical desk environment.

The Desklite Pro features a foldable arm for adjustable lighting angles, an integrated digital display for time and date, and intuitive touch controls. The base is designed for stability on any flat surface.

Setup Instructions

1. Charging the Lamp

The lamp is equipped with a built-in 2000 mAh rechargeable battery. Before first use, fully charge the lamp.

1. Locate the Type-C charging port on the back of the lamp's base.
2. Connect the provided USB Type-C power cable to the lamp and plug the other end into a compatible USB power adapter (not included) or a computer's USB port.
3. The charging indicator light will illuminate. Once fully charged, the indicator may change color or turn off, depending on the model.

Image: A close-up view of the Type-C charging port located on the side of the lamp's wooden base, with a charging cable connected.

2. Setting Time and Date

The lamp features a digital display for time and date. To set these:

1. Locate the setting buttons above the digital display. These typically include a "Mode" button and "Up/Down" or "Set" buttons.
2. Press and hold the "Mode" or "Set" button until the time display starts blinking.
3. Use the "Up/Down" buttons to adjust the hour, then press "Mode" or "Set" to confirm and move to minutes.
4. Repeat the process for minutes, year, month, and day.
5. Once all settings are confirmed, the display will stop blinking.

Image: A detailed view of the lamp's control panel, highlighting the digital display for time and date, and the setting buttons above it, along with the main touch control button.

Operating Instructions

1. Power On/Off and Brightness Adjustment

• To turn the lamp ON or OFF, lightly touch the main power button located below the digital display.
• To adjust brightness, press and hold the power button. The brightness will cycle through its levels. Release the button when the desired brightness is reached.

2. Changing Light Modes (Color Temperature)

The lamp offers three distinct light modes: Warm, Neutral, and Cool. To switch between these modes, briefly tap the main power button repeatedly after turning the lamp on. Each tap will cycle to the next mode.

Image: Three iGear Desklite Pro lamps displayed side-by-side, each illuminating with a different color temperature: Cool White, Natural White, and Warm White, demonstrating the lamp's versatility.

3. Adjusting the Lamp Angle

The lamp head is foldable and can be adjusted up to 140 degrees to direct light precisely where needed. Gently pivot the lamp head to achieve your desired angle.

Image: The iGear Desklite Pro lamp shown with its head tilted back, illustrating its 140-degree adjustable angle for directing light.

4. Eye Protection Feature

The LED light source is designed to provide comfortable illumination, reducing eye strain during extended use for reading or working.

Image: A person studying at a desk with the iGear Desklite Pro lamp providing illumination, emphasizing its eye protection feature.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe the lamp. Avoid abrasive cleaners or solvents that may damage the finish or electronic components.
• Battery Care: To prolong battery life, avoid fully discharging the lamp frequently. Recharge the lamp when the light dims or the low battery indicator appears. If storing for an extended period, charge the battery to approximately 50% every three months.
• Storage: Store the lamp in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Warranty and Support

Warranty Information

The iGear Desklite Pro LED Table Lamp comes with a 1-year limited warranty. This warranty is non-transferrable and is valid for 1 year from the original date of purchase. It covers manufacturing defects under normal use conditions.

Please retain your purchase receipt as proof of purchase for warranty claims.

Customer Support

For any questions, technical assistance, or warranty claims, please contact iGear Tech Private Limited. While specific contact details are not provided in this document, you can typically find support information on the official iGear website or through your point of purchase.

Manufacturer: iGear Tech Private Limited