1. Introduction
Thank you for purchasing the Galano Sofia 7-Drawer Dresser. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image 1.1: Front view of the assembled Galano Sofia 7-Drawer Dresser.
2. Safety Information
- Anti-Tip Device: It is crucial to install the included anti-tip device to prevent the dresser from tipping over, which can cause serious injury. Securely fasten the dresser to a wall stud using the provided hardware.
- Weight Limits: Do not overload drawers. Distribute weight evenly. The top surface has a maximum weight capacity. Refer to specifications for details.
- Assembly: Assemble the dresser on a soft, clean surface to prevent scratches. Ensure all hardware is securely tightened before use. Periodically check and re-tighten hardware as needed.
- Children: Keep small parts and packaging materials away from children during assembly. Do not allow children to climb on or play with the dresser.
- Placement: Place the dresser on a level surface to ensure stability.
3. Package Contents
Before beginning assembly, verify that all parts and hardware are present. If any items are missing or damaged, please contact customer support.
- Dresser panels (top, bottom, sides, back)
- Drawer fronts, sides, and bottoms
- Drawer slides
- Handles
- Assembly hardware (screws, dowels, cam locks, etc.)
- Anti-tip kit
- Instruction manual
4. Setup and Assembly
Assembly of the Galano Sofia dresser is designed to be straightforward. It is recommended to have two people for assembly. You will need a Phillips head screwdriver and a hammer (not included).
- Prepare the Area: Clear a spacious, clean, and soft area for assembly to prevent damage to the furniture.
- Identify Parts: Lay out all panels and hardware. Refer to the included parts diagram (if available in packaging) to identify each component.
- Assemble the Main Frame: Follow the step-by-step diagrams provided in the separate assembly guide to connect the side panels, bottom panel, and back panel using the designated hardware. Ensure all connections are secure.
- Install Drawer Slides: Attach the drawer slides to the inner sides of the dresser frame according to the instructions. Pay attention to the orientation of the slides.
- Assemble Drawers: Construct each of the seven drawers (3 small, 4 large) by attaching the sides, bottom, and front panel. Install the corresponding drawer slides onto the drawer sides. Attach the handles to the drawer fronts.
- Insert Drawers: Carefully slide the assembled drawers into their respective slots in the dresser frame. Ensure they glide smoothly.
- Attach Anti-Tip Device: Securely fasten the anti-tip device to the back of the dresser and to a wall stud. This step is critical for safety.

Image 4.1: Dimensional diagram of the Galano Sofia dresser and its drawers.

Image 4.2: View of the dresser with multiple drawers open, illustrating storage space.
5. Operation
The Galano Sofia dresser features seven drawers for organized storage: three smaller drawers at the top and four larger drawers below. The wide top surface can be used for displaying decorative items, jewelry, or cosmetics.
- Opening/Closing Drawers: Use the handles to gently pull drawers open and push them closed. Avoid forcing drawers.
- Weight Distribution: Distribute items evenly within drawers to prevent strain on the drawer slides and maintain stability. Avoid placing excessively heavy items in a single drawer.
- Top Surface: The top surface is suitable for light decorative items. Avoid placing hot or wet objects directly on the surface without protection.
6. Maintenance and Care
Proper care will ensure the longevity and appearance of your Galano Sofia dresser.
- Cleaning: Wipe the dresser with a dry cloth to remove dust and dirt. For more stubborn marks, use a slightly damp cloth with mild soap, then immediately dry with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
- Spills: Clean spills immediately to prevent staining or damage to the wood finish.
- Hardware: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as necessary to maintain structural integrity.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the finish.
7. Troubleshooting
If you encounter any issues with your dresser, refer to the following common solutions:
- Drawers not sliding smoothly:
- Check if the drawer slides are properly aligned and free of obstructions.
- Ensure the drawer is not overloaded or unevenly weighted.
- Verify that all assembly screws for the slides are tight.
- Dresser feels wobbly:
- Ensure the dresser is placed on a level surface.
- Check and tighten all assembly hardware.
- Confirm the anti-tip device is securely installed.
- Damaged or missing parts:
- Do not attempt to use damaged parts. Contact customer support for replacements.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Galano |
| Model Number | FG-PU-4-1212-DE |
| Color | White |
| Material | Engineered Wood |
| Overall Dimensions (L x W x H) | 119 cm x 35.3 cm x 73.6 cm (46.85 in x 13.9 in x 28.98 in) |
| Item Weight | 48.6 Kilograms (107.15 lbs) |
| Number of Drawers | 7 (3 small, 4 large) |
| Care Instructions | Wipe with a dry cloth |
9. Warranty and Support
Galano products are manufactured with quality and durability in mind. For specific warranty details, please refer to the documentation included with your purchase or visit the official Galano website. If you have any questions, require replacement parts, or need assistance with assembly or troubleshooting, please contact Galano customer support.
Contact Information: Please refer to your purchase receipt or the manufacturer's website for the most current customer support contact details.




