Huuger 63 Inch 9-Drawer Dresser Instruction Manual

Introduction

Thank you for choosing the Huuger 63 Inch 9-Drawer Dresser. This versatile furniture piece is designed to provide ample storage and can also function as a TV stand for screens up to 70 inches. This manual provides comprehensive instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and effective use of your new dresser.

Safety Information

Please read and understand all safety warnings and instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Anti-Tipping Kit: Always attach the dresser to the wall using the provided anti-tipping kit. This is crucial for preventing tip-over accidents, especially in households with children or pets.
• Weight Capacity: Do not exceed the recommended weight capacity for the top surface or individual drawers. Overloading can compromise stability and structural integrity. Each fabric drawer has a capacity of approximately 12 lbs.
• Level Surface: Ensure the dresser is placed on a flat, level surface. Use the adjustable feet to stabilize the unit and prevent wobbling.
• Assembly: Assembly should ideally be performed by two adults. Follow all steps in the instruction manual carefully.
• Children Safety: Do not allow children to climb on or play with the dresser or its drawers. Keep small parts and assembly hardware out of reach of children.

Figure 1: Anti-Tipping Device. This diagram illustrates the importance of attaching the dresser to the wall with the anti-tipping kit for family safety. Failure to use these kits can result in the dresser falling over.

Parts List

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact Huuger customer support.

Setup & Assembly

Assembly is straightforward and typically takes about 30 minutes with two people. All necessary tools are included. Follow these steps carefully:

1. Unpack & Identify: Unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided parts list.
2. Assemble Metal Frame: Connect the metal frame sections (B, C, D) using the provided screws and Allen key. Ensure all connections are secure.
3. Attach Adjustable Feet: Screw the adjustable feet (G) into the designated holes at the bottom of the metal frame. Adjust them later to level the dresser.
4. Install Top Wooden Boards: Place the two wooden top boards (A) onto the assembled metal frame. Secure them with screws using the provided screwdriver. Ensure the long bars (#8, as mentioned in a review) go against the wall for proper cross-support.
5. Prepare Fabric Drawers: For each fabric drawer (E), insert the bottom board to make it sturdy. Attach the handles (F) to the front of each drawer. Be careful not to overtighten screws when attaching handles, as they are plastic.
6. Insert Drawers: Slide the assembled fabric drawers into their respective slots in the metal frame.
7. Install Anti-Tipping Kit: Securely attach the anti-tipping kit (H) to the back of the dresser and to a wall stud. This step is critical for safety.

Figure 2: Assembled Dresser. A view of the fully assembled Huuger 9-drawer dresser, ready for use in a bedroom.

Figure 3: Drawer Material. The drawers are constructed from a 3-layer high-grade fabric, including a PU leather surface, MDF board, and fabric, designed to maintain shape.

Operating Instructions

• Drawer Use: Gently pull and push the handles to open and close the fabric drawers. Avoid forcing them.
• Weight Distribution: Distribute items evenly within the drawers to prevent sagging or damage. Place heavier items in lower drawers for better stability. Each drawer can hold up to 12 lbs.
• TV Stand Functionality: The top surface can accommodate TVs up to 70 inches. Ensure the TV's base fits securely on the dresser's surface and does not overhang.

Figure 4: Large Storage Capacity. The dresser features nine deep fabric drawers, offering ample space for various items such as clothing, bedding, and media accessories. Each drawer has a capacity of 12 lbs.

Figure 5: TV Stand Function. This dresser is designed to serve as a TV stand, capable of holding screens up to 70 inches. The image shows a 55-inch TV on the dresser.

Maintenance

• Cleaning: Wipe the wooden top surface with a soft, damp cloth. For the fabric drawers, use a mild detergent and a soft brush if necessary, then air dry. Avoid harsh chemicals or abrasive cleaners.
• Dusting: Regularly dust the dresser to prevent buildup.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Adjustable Feet: Re-adjust the feet if the dresser becomes wobbly due to uneven flooring.

Troubleshooting

Specifications

• Brand: Huuger
• Model Name: Dresser TV Stand (Model: 8718)
• Product Dimensions: 13.8"D x 63"W x 26.8"H
• Color: White
• Mounting Type: Freestanding
• Room Type: Bedroom
• Special Feature: Adjustable Feet
• Furniture Finish: Charcoal
• Assembly Required: Yes
• Item Weight: 43.3 Pounds
• Number of Pieces: 1
• Manufacturer: Huuger
• Date First Available: May 7, 2024

Figure 6: Product Size Diagram. This diagram provides detailed measurements of the dresser, including its height (26.8 inches), width (63 inches), and depth (13.8 inches), along with TV size compatibility.

Warranty & Support

For warranty information or technical support, please contact Huuger customer service directly. Refer to the product packaging or the official Huuger website for contact details.

Visit the Huuger Store for more products and information.