1. Introduction
Thank you for choosing WdtPro Solar Fence Lights. This manual provides essential information for the safe and efficient use of your new solar lights. These lights are designed for outdoor use, offering both warm white and RGB color-changing illumination for various applications such as fences, decks, steps, patios, and gardens.
The WdtPro Solar Fence Lights (Model TDL012) are a 6-pack set, featuring IP65 waterproofing and efficient solar charging for reliable performance.
Image: WdtPro Solar Fence Lights illuminating outdoor steps and fences, showcasing their versatile application.
2. Safety Information
- Ensure the solar panel receives direct sunlight for optimal charging.
- Do not attempt to disassemble or modify the product, as this may void the warranty and cause damage.
- Keep the product away from fire or extreme heat sources.
- Dispose of batteries according to local regulations. Do not dispose of batteries in household waste.
- Clean the solar panel regularly to maintain charging efficiency.
3. Package Contents
The WdtPro Solar Fence Lights package includes:
- 6 x WdtPro Solar Fence Lights (Model TDL012)
- Mounting Screws and Anchors
- User Manual
4. Setup and Installation
Before first use, ensure the lights are charged for at least 6-8 hours in direct sunlight. Locate the ON/OFF switch, usually on the back or underside of the unit, and set it to the 'ON' position.
4.1 Choosing a Location
Select an outdoor location where the solar panel can receive maximum direct sunlight for 6-8 hours daily. Avoid areas under trees, eaves, or other obstructions that may block sunlight, as this will reduce charging efficiency and lighting duration.
4.2 Installation Options
The WdtPro Solar Fence Lights offer two primary installation methods:
Image: Illustration of the two installation options: Top Mount Decor for horizontal surfaces like deck railings, and Side Mount Decor for vertical surfaces like walls or fence posts.
- Top Mount Decor: Ideal for horizontal surfaces such as deck railings or steps. Position the light so the solar panel faces upwards to capture sunlight. Use the provided screws to secure the light firmly.
- Side Mount Decor: Suitable for vertical surfaces like fence posts, walls, or risers of steps. Attach the light using the provided screws, ensuring the solar panel is angled to receive sunlight.
Use a drill to create pilot holes if necessary, then secure the lights with the provided screws and anchors.
5. Operation
5.1 Initial Activation
Before first use, ensure the ON/OFF switch is in the 'ON' position. Allow the lights to charge in direct sunlight for 6-8 hours. The lights will automatically turn on at dusk and turn off at dawn.
5.2 Charging and Lighting Duration
Image: Illustration demonstrating the solar light's automatic function: 6-8 hours of auto charging during the day and up to 12 hours of auto light at night.
The integrated solar panel charges the internal battery during the day. A full charge (6-8 hours of direct sunlight) can provide up to 12 hours of illumination at night. Actual lighting duration may vary based on sunlight intensity, weather conditions, and seasonal changes.
5.3 Lighting Modes
The WdtPro Solar Fence Lights feature three distinct lighting modes:
Image: Visual representation of the three lighting modes: RGB Fade Changing, Warm Light, and 6 Fixed RGB Colors, demonstrating the aesthetic versatility of the lights.
- Warm Light Mode: Provides a steady, soft warm white illumination, ideal for ambient lighting.
- RGB Fade Changing Mode: Cycles through a spectrum of colors, creating a dynamic and festive atmosphere.
- Fixed RGB Colors Mode: Allows selection of one of 6 fixed RGB colors for consistent decorative lighting.
To switch between modes, locate the mode button (often integrated with the ON/OFF switch or a separate small button) and press it to cycle through the available options.
6. Maintenance
6.1 Cleaning
Regularly clean the solar panel surface with a soft, damp cloth to remove dust, dirt, and debris. A clean solar panel ensures maximum sunlight absorption and charging efficiency.
6.2 Waterproofing
Image: WdtPro Solar Fence Lights installed on a fence during rain, illustrating their IP65 waterproof design for outdoor durability.
The lights are IP65 waterproof, meaning they are protected against dust ingress and low-pressure water jets from any direction. While designed for outdoor use, avoid submerging them in water.
6.3 Battery Care
The integrated rechargeable battery is designed for long-term use. If the lights are stored for an extended period, ensure they are fully charged before storage and recharged every few months to maintain battery health.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. |
|
|
| Light duration is short. |
|
|
| Light flickers or is dim. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | TDL012 |
| Brand | WdtPro |
| Color | Black |
| Material | Plastic |
| Product Dimensions | 21.6L x 16.5W x 5.1H Centimeters |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Solar Powered |
| Special Feature | IP65 Waterproof |
| Number of Light Sources | 6 (per pack) |
| Voltage | 12 Volts (DC) |
| Light Modes | Warm White, RGB Fade, Fixed RGB Colors |
Image: Comparison highlighting the larger solar panel area and increased brightness of the WdtPro Solar Fence Lights.
9. Warranty and Support
WdtPro products are manufactured with quality and performance in mind. For warranty information or technical support, please refer to the product packaging or contact your retailer. Keep your purchase receipt as proof of purchase.
For further assistance, please visit the official WdtPro website or contact their customer service department.