Feonase Queen Bed Frame User Manual

Product Overview

The Feonase Queen Bed Frame is designed to provide both luxury and comfort, featuring a 16-inch wide wingback headboard with innovative nailhead trim and button-tufted design. This bed frame enhances any bedroom with its sophisticated and fashionable style. The headboard is wrapped with high-rebound memory sponge, ensuring a soft and breathable backrest experience. It also includes a convenient charging station and ample storage space.

Figure 1: Assembled Feonase Queen Bed Frame with Wingback Headboard.

Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference. Failure to follow these instructions may result in injury or damage to the product.

• Ensure all parts are present and undamaged before beginning assembly.
• Assemble the bed frame on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly, as this may strip threads or damage components.
• Regularly check all connections to ensure they remain tight and secure.
• Do not exceed the maximum weight recommendation of 1000 pounds.
• Keep children and pets away from the assembly area.
• Only use the bed frame for its intended purpose.

Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact Feonase customer support.

• Wingback Headboard (1)
• Side Rails (2)
• Footboard (1)
• Thickened Wooden Slats (12)
• Central Cross Support Bar (1)
• Solid Support Legs (4-6, depending on design)
• Hardware Pack (Screws, bolts, Allen wrench)
• Power Cord for Charging Station (1)
• Assembly Instructions Manual (This document)

Figure 2: Key structural components including thickened wood slats and support legs.

Setup and Assembly

The Feonase Queen Bed Frame is designed for easy assembly, typically completed by one person within 30 minutes. All pieces are clearly marked with sequence numbers to simplify the process. Follow these steps carefully:

1. Unpack and Identify Parts: Lay out all components on a clean, soft surface. Refer to the parts list and identify each piece by its corresponding number.
2. Assemble the Headboard: Attach the wingback sections to the main headboard panel using the provided hardware. Ensure all connections are secure.
3. Connect Side Rails: Attach the side rails to the assembled headboard using the designated bolts. Do not fully tighten yet.
4. Attach Footboard: Connect the footboard to the other end of the side rails. Once all four corners are connected, gently tighten all bolts.
5. Install Central Cross Support: Position the central cross support bar within the frame and secure it according to the instructions. This reinforces the bed's sturdiness.
6. Place Wooden Slats: Lay the thickened wooden slats across the frame. The slats are attached by Velcro for quick and easy installation. Ensure they are evenly spaced and securely fastened. EVA strips are integrated to provide cushioning and prevent noise.
7. Install Support Legs: Screw the solid support legs into their designated positions on the frame. Ensure they are firmly attached and provide stable support.
8. Connect Charging Station: Plug the power cord into the built-in charging station on the headboard and then into a wall outlet.
9. Final Check: Verify that all connections are tight and the bed frame is stable before placing your mattress.

Figure 3: Queen Bed Frame dimensions for reference during setup.

Operating Instructions

Charging Station

The Feonase Queen Bed Frame features a convenient charging station integrated into the headboard, providing easy access to power for your electronic devices.

• AC Outlets: The headboard includes two 110V/12A AC outlets. Simply plug in your devices, such as lamps or laptops, directly into these outlets.
• USB Ports: Two 5V/2A USB ports are also available for charging smartphones, tablets, and other USB-powered devices. Use your device's charging cable to connect to these ports.
• Storage Space: The top of the headboard provides approximately 4 inches of storage space, ideal for placing items like phones, books, or small electronics while they charge.

Figure 4: Integrated charging station with AC outlets and USB ports on the headboard.

Maintenance

Proper maintenance will ensure the longevity and appearance of your Feonase Queen Bed Frame.

• Cleaning Fabric: The upholstered parts of the bed frame are made of Linen fabric. For cleaning, dry clean only is recommended. For minor spills, gently blot with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
• Frame Cleaning: Wipe down the metal and wood components with a soft, damp cloth. Dry immediately to prevent moisture damage.
• Regular Checks: Periodically inspect all bolts and screws to ensure they remain tight. Retighten as necessary to maintain stability and prevent noise.
• Underbed Storage: The 8-inch underbed clearance provides space for storage. Keep this area clean and free of excessive clutter to allow for air circulation.

Figure 5: Illustration of the 8-inch underbed storage space.

Troubleshooting

This section addresses common issues you might encounter with your bed frame.

Specifications

Warranty and Support

Feonase is committed to providing high-quality products. For any questions regarding assembly, missing parts, or product performance, please contact Feonase customer support. Please have your purchase receipt and model number (749B2) ready when contacting support.

For the most up-to-date warranty information, please refer to the official Feonase website or contact your retailer.