1. Introduction
This manual provides detailed instructions for the assembly, safe operation, and maintenance of your Goohome Triple Bunk Beds. Please read this manual thoroughly before assembly and use to ensure proper installation and safe usage of the product. Retain this manual for future reference.

Image 1.1: Fully assembled Goohome Triple Bunk Beds with two lower twin beds and one upper twin bed, featuring a staircase with integrated storage shelves.
2. Safety Information
Your safety is paramount. Adhere to all warnings and instructions to prevent injury. Failure to follow these instructions can result in serious injury or death.
- Maximum Weight Capacity: The upper bed has a weight capacity of 300 lbs. Each lower bed has a weight capacity of 300 lbs. Do not exceed these limits.
- Guardrails: The upper bunk bed is equipped with guardrails. Ensure they are always securely in place.
- Mattress Thickness: The recommended mattress thickness for the upper bed is 6 inches. For the lower beds, the recommended mattress thickness is 8-10 inches. Ensure the mattress on the upper bunk is not so thick that it reduces the effectiveness of the guardrails.
- Age Restriction: Children under 6 years of age should not use the upper bunk.
- Assembly: This product requires assembly. Ensure all parts are correctly installed and all fasteners are tightened before use. Periodically check and re-tighten all fasteners.
- No Jumping: Do not allow jumping on the bed.
- Ventilation: Ensure adequate ventilation around the bed.
- Modifications: Do not modify the bed structure in any way. Use only manufacturer-approved replacement parts.
3. Package Contents
The Goohome Triple Bunk Beds are typically shipped in two packages. Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
Components:
- Metal Bed Frame components (various beams, posts, and guardrails)
- MDF (Medium-Density Fiberboard) panels for storage shelves
- Staircase components
- Bed Slats (22 pieces for each bed)
- Assembly Hardware (screws, bolts, nuts, washers, Allen wrench)
- Instruction Manual (this document)
4. Setup and Assembly
Assembly is required for this product. It is recommended to have at least two adults for assembly. Clear a spacious area for assembly and keep all parts organized.
Pre-Assembly Checklist:
- Unpack all components and lay them out on a soft, clean surface to prevent scratches.
- Identify all parts using the provided parts list (if included separately). Pay close attention to the labels on hardware bags to avoid mixing up screws and bolts.
- Ensure all pre-drilled holes are clear and align correctly. If any holes are missing or misaligned, contact customer support.
Assembly Steps:
Follow the step-by-step installation manual provided with your product. The general sequence involves:
- Assemble the base frames for the two lower twin beds.
- Attach the vertical support posts.
- Assemble and attach the upper twin bed frame.
- Install the guardrails for the upper bed.
- Assemble and attach the staircase with integrated storage shelves.
- Place the bed slats onto all three bed frames.
- Once fully assembled, ensure all bolts and screws are securely tightened.

Image 4.1: Detailed dimensional diagram of the Goohome Triple Bunk Beds, illustrating overall length, width, height, and individual bed and staircase measurements.

Image 4.2: Close-up of the staircase with four integrated wooden shelves, providing access to the upper bunk and additional storage.
5. Operating and Usage Guidelines
The Goohome Triple Bunk Beds offer a versatile 3-in-1 configuration, providing sleeping arrangements for three individuals within a compact footprint.
- Bed Configuration: This unit features two twin beds on the lower level and one twin bed on the upper level.
- Staircase Access: The integrated staircase provides safe and easy access to the upper bunk.
- Storage: The staircase incorporates four shelves for convenient storage of books, toys, or personal items. Additionally, the upper bed includes a 21.3" x 39" plank for extra storage.
- Mattress Support: The bed frames are designed with slats, eliminating the need for a box spring.
6. Maintenance
Regular maintenance will extend the life and ensure the safety of your bunk beds.
- Cleaning: Wipe down metal surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish. For MDF shelves, use a dry or slightly damp cloth.
- Fastener Checks: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections. Re-tighten any loose fasteners to maintain structural integrity and prevent wobbling.
- Structural Integrity: Check for any signs of wear, damage, or bending in the metal frame. If any damage is observed, discontinue use immediately and contact customer support.
7. Troubleshooting
This section addresses common issues you might encounter with your Goohome Triple Bunk Beds.
Common Issues and Solutions:
- Wobbling or Instability:
Solution: Ensure all assembly bolts and screws are fully tightened. Check that the bed is placed on a level surface. - Missing Parts or Hardware:
Solution: Before assembly, carefully check all packages against the parts list. If parts are missing, do not attempt to substitute with non-original components. Contact Goohome customer support for replacements. - Difficulty during Assembly:
Solution: Review the instruction manual carefully, paying close attention to diagrams. Ensure you are using the correct hardware for each step. If instructions are unclear, refer to the product images for visual guidance or contact support. - Damaged Components upon Arrival:
Solution: If any parts are bent, scratched, or otherwise damaged upon delivery, do not proceed with assembly. Document the damage with photographs and contact the retailer or Goohome customer support immediately for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Goohome |
| Model Number | Triple Bunk Beds |
| Material | Metal + MDF |
| Size | Twin (3-in-1 Twin Over Twin & Twin) |
| Overall Product Dimensions | 101.2"L x 77.4"W x 57.8"H |
| Upper Bed Dimensions | 76'' x 39'' |
| Lower Bed Dimensions | 75.2'' x 39.2'' (each) |
| Total Height | 57.8'' |
| Number of Bed Slats (Upper/Down) | 22pcs / 22pcs / 22pcs |
| Recommended Mattress Thickness (Upper) | 6'' |
| Recommended Mattress Thickness (Lower) | 8-10'' |
| Upper Bed Weight Capacity | 300 lbs |
| Lower Bed Weight Capacity | 300 lbs (each) |
| Assembly Required | Yes |
| Spring Box | Not needed |
| Item Weight | Approximately 180 lbs (Overall Product Weight) |
| UPC | 764942966281 |
9. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Goohome is committed to customer satisfaction.
Customer Support:
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Goohome customer support through the retailer where the product was purchased. Please have your model number (Triple Bunk Beds) and purchase date available when contacting support.