1. Product Overview
The Movo HMT-2 is a versatile tabletop tripod microphone stand designed to provide stable support for microphones. It is specifically compatible with the Movo WMX-HM and Rode Interview Go handheld wireless mic adapters. Its compact and adjustable design makes it suitable for various recording environments, from home studios to on-location events, catering to the needs of podcasters, vloggers, and content creators.
Image Description: A black Movo HMT-2 tabletop tripod microphone stand with a microphone attached, demonstrating its adjustable ball head and stable tripod base.
2. Package Contents
The Movo HMT-2 package includes the following components:
- Movo HMT-2 Tabletop Tripod Base
- Microphone Holder (compatible with Movo WMX-HM and Rode Interview Go)
Image Description: An illustration showing the Movo HMT-2 tripod stand with a microphone attached, highlighting that the HMT-2 tripod/desk stand is included.
3. Setup Instructions
Follow these steps to set up your Movo HMT-2 microphone stand:
- Unfold the Tripod Legs: Gently pull the three legs outwards until they are fully extended and locked into position. The legs can be partially or fully extended for maximum stability on various surfaces.
- Attach the Microphone Holder: The stand features a 1/4-inch screw at the top of the ball head. If a protective rubber cover is present, remove it. Screw the microphone holder onto this 1/4-inch thread. Ensure it is securely tightened to prevent wobbling.
- Mount Your Microphone: Carefully insert your compatible microphone (e.g., Movo WMX-HM, Rode Interview Go) into the attached microphone holder. Verify that the microphone is seated firmly and is stable.
Image Description: A split image demonstrating the collapsible nature of the tripod for portability and the adjustable legs for increased support and stability.
4. Operating the Stand
The Movo HMT-2 features an adjustable ball head for precise microphone positioning:
- Locate the Adjustment Knob: Identify the blue knob located on the side of the ball head mechanism.
- Loosen for Adjustment: Turn the blue knob counter-clockwise to loosen the ball head. This action will allow you to freely adjust the angle and orientation of the microphone.
- Position the Microphone: Angle your microphone to the desired position for optimal sound capture. Consider the sound source and environment for best results.
- Secure the Position: Once the microphone is in the desired position, turn the blue knob clockwise to tighten the ball head. Ensure it is firm to prevent any unwanted movement during recording or use.
Image Description: An image illustrating the adjustable ball head of the Movo HMT-2, showing how the microphone can be angled to capture sound effectively.
5. Maintenance
To ensure the longevity and optimal performance of your Movo HMT-2 stand, follow these maintenance guidelines:
- Cleaning: Keep the stand clean by regularly wiping it with a soft, dry cloth.
- Avoid Harsh Chemicals: Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage the material and finish of the stand.
- Storage: Store the stand in a dry, cool place away from direct sunlight and extreme temperatures when not in use.
- Check Connections: Periodically inspect all screws and connections, especially the microphone holder and ball head knob, to ensure they remain secure.
6. Troubleshooting
If you encounter any issues with your Movo HMT-2 stand, refer to the following common troubleshooting tips:
- Microphone is unstable or wobbles:
- Ensure the tripod legs are fully extended and locked into their stable positions.
- Verify that the blue ball head knob is securely tightened after adjusting the microphone angle.
- Confirm that the microphone holder is properly screwed onto the 1/4-inch thread at the top of the ball head. - Difficulty adjusting microphone angle:
- Ensure the blue ball head knob is sufficiently loosened by turning it counter-clockwise. If the knob is excessively loose, it may detach; re-attach and tighten carefully.
- Check for any obstructions preventing smooth movement of the ball head. - Stand slides on the surface:
- Always place the stand on a flat, stable, and non-slippery surface.
- While the tripod feet are designed to provide grip, extreme angles or uneven surfaces may reduce overall stability.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | HMT-2 |
| Item Weight | 7.8 ounces (0.22 Kilograms) |
| Package Dimensions | 8.07 x 3.43 x 1.85 inches |
| Body Material | Acrylonitrile Butadiene Styrene (ABS) Plastic |
| Connector Type | 3/8-inch threaded mount (with 1/4-inch adapter for ball head) |
| Style | Tabletop |
| Base Type | Tripod |
8. Warranty and Support
The Movo HMT-2 Tabletop Tripod Microphone Stand is backed by a 1-Year Warranty, ensuring peace of mind regarding its quality and performance.
For technical assistance, troubleshooting guidance, or to initiate a warranty claim, please contact Movo's dedicated US-Based support team. They are available to help with any product-related inquiries.
For additional information, product registration, or to access further resources, please visit the official Movo website or refer to the documentation provided with your purchase.
