Klipsch RSM-650 Indoor/Outdoor Speaker Instruction Manual

1. Product Overview

The Klipsch RSM-650 Indoor/Outdoor Speakers are part of the RSM Series, designed as full-range residential surface mount loudspeakers. These speakers are built to deliver high-quality audio performance in various environments, both indoors and outdoors.

Key features include:

• IPX6 Rated: Ensures water resistance and rainproof performance for challenging weather conditions, making them suitable for outdoor installations.
• Tractrix Hyperfold Port: An innovative port design engineered to extend port length for maximum bass power, reducing chuffing and providing wider dispersion.
• Dual 5-Way Binding Post: Offers versatile connection options for various audio setups.
• 1" Titanium Compression Driver: Features a titanium-loaded floating driver bridge with wide dispersion phase plug for effortless, high-clarity detail and broad coverage.
• Set Screws on Grille: Provides a secure fit between the speaker and grille, ensuring stability in any environment.

Figure 1.1: Angled view of the Klipsch RSM-650 speaker, showcasing its white enclosure and grille.

2. Setup and Installation

2.1 Unpacking

Carefully remove the speakers from their packaging. Ensure all components are present. The box should contain:

• Klipsch RSM-650 Indoor/Outdoor Speakers (Pair)
• Mounting Brackets
• Grilles with set screws

2.2 Placement Considerations

The RSM-650 speakers are designed for both indoor and outdoor use. When selecting a location, consider the following:

• Outdoor Use: Due to their IPX6 rating, these speakers are resistant to water jets and rain. Mount them in areas where they can provide optimal sound coverage, such as patios, decks, or outdoor kitchens.
• Indoor Use: For indoor installations, position the speakers to achieve the desired sound dispersion.
• Mounting Surface: Ensure the mounting surface is sturdy enough to support the weight of the speakers (approximately 25.6 pounds per pair). The recommended mounting type is wall mount.

Figure 2.1: Example of Klipsch RSM-650 speakers mounted on an outdoor patio wall.

2.3 Mounting the Speakers

The speakers come with integrated mounting brackets. Follow these general steps for wall mounting:

1. Determine the optimal mounting height and angle for sound dispersion.
2. Use the mounting bracket as a template to mark drilling locations on the wall.
3. Drill pilot holes and secure the mounting bracket to the wall using appropriate hardware (not included, ensure it's suitable for your wall type and speaker weight).
4. Attach the speaker to the secured mounting bracket. The bracket allows for adjustment of the speaker angle.

Figure 2.2: Rear view of the speaker, highlighting the integrated mounting bracket.

2.4 Connecting the Speakers

The Klipsch RSM Series speakers employ dual 5-way binding posts for audio connections. Use high-quality speaker wire for optimal performance.

1. Strip approximately 1/2 inch of insulation from the ends of your speaker wire.
2. Unscrew the binding post terminals on the back of the speaker.
3. Insert the bare wire into the hole in the binding post. Ensure positive (+) from the amplifier connects to positive (+) on the speaker, and negative (-) to negative (-).
4. Tighten the binding post terminals securely to ensure a good connection.
5. Connect the other end of the speaker wire to your amplifier or receiver, maintaining correct polarity.

Figure 2.3: Detail of the dual 5-way binding posts for speaker wire connection.

3. Operation

3.1 Powering On and Audio Playback

Once the speakers are properly installed and connected to an amplifier or receiver, you can begin audio playback.

1. Ensure your amplifier/receiver is powered on and set to the correct input source.
2. Start playing audio from your desired device. Compatible devices include Desktop, Laptop, MP3 Player, Projector, Smartphone, Tablet, and Television.
3. Adjust the volume on your amplifier/receiver to a comfortable listening level.

3.2 Control Method

The primary control method for these speakers is through the connected audio source (e.g., amplifier, receiver, or directly from a device if it has volume control). The speakers themselves do not have integrated touch controls for audio playback.

4. Maintenance and Care

Proper maintenance ensures the longevity and optimal performance of your Klipsch RSM-650 speakers.

4.1 Cleaning

• For general cleaning, use a soft, dry cloth to wipe down the speaker enclosure and grille.
• For outdoor installations, if the speakers become dirty, you can gently wipe them with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or components.
• The IPX6 rating means they are resistant to strong water jets, but avoid submerging the speakers or directing high-pressure water directly at the drivers.

4.2 Grille Maintenance

The grilles are secured with set screws. Periodically check these screws to ensure they remain tight, especially in environments with vibrations or extreme weather changes.

5. Troubleshooting

If you experience issues with your Klipsch RSM-650 speakers, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Klipsch customer support or your authorized dealer for further assistance.

6. Technical Specifications

Figure 6.1: Detailed dimensions of the Klipsch RSM-650 speaker.

7. Warranty and Support

7.1 Warranty Information

The Klipsch RSM-650 speakers come with a Limited Warranty. For specific terms and conditions of your warranty, please refer to the documentation included with your purchase or visit the official Klipsch website.

7.2 Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Klipsch customer support. You can find contact information on the official Klipsch website or through your authorized dealer.

You can also visit the official Klipsch store on Amazon for more product information and resources: Klipsch Amazon Store.