Klipsch RSM-800 Indoor/Outdoor Speaker System Instruction Manual

1. Introduction

Thank you for choosing the Klipsch RSM-800 Indoor/Outdoor Speaker System. These two-way, all-weather loudspeakers are engineered to deliver high-quality audio performance in various environments. This manual provides essential information for the proper setup, operation, and maintenance of your speakers to ensure optimal performance and longevity.

Key features of your RSM-800 speakers include:

• IPX6 Rated: Designed for indoor and outdoor installations, offering water resistance and rainproof protection.
• Tractrix Hyperfold Port: Patented design extending port length for maximum bass power and increased airflow, reducing chuffing and providing wider sound dispersion.
• Dual 5-Way Binding Post: Provides versatile and secure connection options for speaker wires.
• 1" Titanium Compression Driver: Features a titanium-loaded floating driver bridge with a wide dispersion phase plug for effortless, high-clarity detail.
• Set Screws on Grille: Ensures a secure fit between the speaker and grille, maintaining integrity in various environments.

2. Setup and Installation

2.1 Unpacking

Carefully remove the speakers and all components from the packaging. Verify that all included components are present: two outdoor speakers and mounting hardware.

2.2 Speaker Placement

The Klipsch RSM-800 speakers are designed for both indoor and outdoor use. Consider the following for optimal sound distribution:

• For outdoor installations, position speakers under eaves or overhangs to provide some protection from direct elements, although they are IPX6 rated.
• Mount speakers at a height that allows sound to project across your listening area effectively.
• Ensure adequate spacing between speakers for proper stereo imaging.

2.3 Mounting

The speakers are designed for wall mounting. The included mounting bracket allows for adjustable angles to direct sound. Use appropriate hardware for your mounting surface to ensure a secure installation.

Figure 1: Klipsch RSM-800 speaker mounted, showing its design and bracket.

Figure 2: Example of Klipsch RSM-800 speakers installed in an outdoor patio setting.

2.4 Wiring Connections

Connect your speakers to a compatible amplifier or receiver using high-quality speaker wire. The RSM-800 features dual 5-way binding posts for secure connections. Ensure correct polarity (positive to positive, negative to negative) for optimal sound performance.

Figure 3: Detail of the dual 5-way binding posts for speaker wire connection.

3. Operating Instructions

Once properly installed and connected, your Klipsch RSM-800 speakers are ready for use. These are passive speakers and require an external amplifier or receiver for operation.

• Power Source: The speakers are powered via the connected amplifier/receiver (Corded Electric).
• Connectivity: Connect your audio source (e.g., MP3 Player, Smartphone, Tablet, Television) to your amplifier/receiver using auxiliary connections.
• Audio Output: The speakers provide stereo audio output. Adjust volume and audio settings on your connected amplifier/receiver.

4. Maintenance

The Klipsch RSM-800 speakers are built for durability and all-weather performance. Regular maintenance will help preserve their appearance and functionality.

• Cleaning: Periodically wipe down the speaker enclosures with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
• Grille Maintenance: The grilles are secured with set screws. Ensure these remain tight. If cleaning is needed, gently wipe the grille.
• Environmental Protection: While IPX6 rated for water and rain, prolonged exposure to extreme conditions (e.g., direct sunlight, heavy snow, or salt spray) may accelerate wear. Consider additional protective measures if speakers are in harsh environments.

5. Troubleshooting

If you experience issues with your Klipsch RSM-800 speakers, consider the following common troubleshooting steps:

• No Sound:
  • Check all speaker wire connections at both the speaker and the amplifier/receiver. Ensure correct polarity.
  • Verify that the amplifier/receiver is powered on and the correct input source is selected.
  • Confirm that the volume on your amplifier/receiver and audio source is turned up.
• Distorted Sound:
  • Reduce the volume level on your amplifier/receiver and audio source.
  • Check speaker wire connections for any loose strands or short circuits.
  • Ensure your amplifier/receiver is not underpowered or overpowered for the speakers. Refer to your amplifier's manual for compatibility.
• Intermittent Sound:
  • Inspect speaker wires for damage or loose connections.
  • Ensure the audio source is stable and not experiencing interruptions.

If problems persist after attempting these steps, contact Klipsch customer support for further assistance.

6. Specifications

Detailed technical specifications for the Klipsch RSM-800 Indoor/Outdoor Speaker System:

Figure 4: Klipsch RSM-800 speaker with key dimensions.

7. Warranty and Support

7.1 Warranty Information

The Klipsch RSM-800 speakers come with a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the official Klipsch website or the warranty card included with your product.

7.2 Customer Support

For technical assistance, product inquiries, or warranty claims, please visit the official Klipsch website or contact their customer service department.

Visit the Official Klipsch Store