FOHERE NTH15-23ARL
FOHERE Oscillating Tower Fan and Space Heater User Manual
Model: NTH15-23ARL | Brand: FOHERE
Introduction
Thank you for choosing the FOHERE Oscillating Tower Fan and Space Heater. This 2-in-1 appliance is designed to provide year-round comfort, offering both cooling fan and heating functions. Please read this manual thoroughly before use to ensure safe and optimal operation. Keep this manual for future reference.

Important Safety Instructions
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using this heater/fan.
- This heater/fan is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater/fan. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater/fan and keep them away from the sides and rear.
- Extreme caution is necessary when any heater/fan is used by or near children or invalids and whenever the heater/fan is left operating and unattended.
- Always unplug heater/fan when not in use.
- Do not operate any heater/fan with a damaged cord or plug or after the heater/fan malfunctions, has been dropped or damaged in any manner. Return heater/fan to authorized service facility for examination, electrical or mechanical adjustment, or repair.
- Do not use outdoors.
- This heater/fan is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater/fan where it may fall into a bathtub or other water container.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater/fan, turn controls to off, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater/fan.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater/fan has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
- Use this heater/fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug heaters/fans directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater/fan includes an Overheat Protection feature. If the heater/fan overheats, it will automatically shut off. Unplug the heater/fan, wait 10 minutes for it to cool down, and then plug it back in.
- The unit also features Tip-Over Protection, automatically shutting off if accidentally knocked over.

Package Contents
- 1 x FOHERE Tower Fan and Heater (Model NTH15-23ARL)
- 1 x Remote Control
- 1 x User Manual
Product Overview
Control Panel
The control panel is located on the top of the unit. It features a digital display and touch-sensitive buttons for various functions.

- Power Button (On/Off): Turns the unit on or off.
- Mode Button (M): Cycles through fan modes (Normal/Sleep) or heater modes (Normal/ECO/Sleep).
- Timer Button (Clock icon): Sets the auto-off timer from 1 to 12 hours.
- Oscillation Button (Arrows icon): Activates or deactivates the oscillation function.
- ECO Button: Activates the energy-saving ECO mode for heating.
- Temperature/Speed Adjustment (+/-): Adjusts temperature in heater mode or fan speed in fan mode.
Remote Control
The remote control allows for convenient operation from a distance. It duplicates most functions available on the main control panel.

Setup
- Unpacking: Carefully remove the unit from its packaging. Retain packaging for storage or future transport.
- Placement: Place the tower fan and heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the unit to allow for proper airflow and to prevent fire hazards. Do not place on soft surfaces like carpets or rugs that may block air intakes.
- Power Connection: Plug the power cord directly into a 120V AC, 60Hz electrical outlet. Do not use extension cords or power strips. The unit is designed for indoor use only.
Operating Instructions
Power On/Off
- Press the Power Button (
) on the control panel or remote to turn the unit on or off.
Switching Between Fan and Heater Modes
- Use the physical switch located at the bottom front of the unit to select between "Fan" and "Heater" modes.

Fan Mode Operation
- Adjusting Fan Speed: In Fan mode, press the + or - buttons to cycle through 3 fan speeds (Low, Medium, High).
- Fan Modes: Press the Mode (M) button to switch between Normal Fan mode and Sleep Fan mode. Sleep mode operates at a lower speed for quieter operation.

Heater Mode Operation
- Adjusting Temperature: In Heater mode, press the + or - buttons to set the desired temperature between 59°F (15°C) and 95°F (35°C). The unit will automatically adjust its heating output to maintain the set temperature.
- Heater Modes: Press the Mode (M) button to cycle through Normal Heater mode, ECO Heater mode, and Sleep Heater mode.
- Normal Mode: Provides continuous heating at the selected temperature.
- ECO Mode: The built-in sensor intelligently adjusts operating power based on room temperature to save energy.
- Sleep Mode: Operates at a lower heat setting and reduced fan speed for quieter operation during sleep.


Oscillation Function
- Press the Oscillation Button (
) to activate or deactivate the wide-angle oscillation feature, distributing air evenly across the room.
Timer Function
- Press the Timer Button (
) to set the auto-off timer. Each press increases the timer by 1 hour, up to a maximum of 12 hours. The unit will automatically shut off once the set time has elapsed.
Maintenance
Regular cleaning and maintenance will help prolong the life of your FOHERE Tower Fan and Heater.
- Before Cleaning: Always unplug the unit from the power outlet and allow it to cool completely before cleaning.
- Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish.
- Air Intake/Outlet: Use a vacuum cleaner with a brush attachment to gently remove dust and debris from the air intake and outlet grilles. Do not attempt to disassemble the unit for cleaning.
- Storage: If storing the unit for an extended period, clean it thoroughly, then place it back in its original packaging and store in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. |
|
|
| No heat/cool air output. |
|
|
| Unit is making unusual noise. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | FOHERE |
| Model Number | NTH15-23ARL |
| Type | Oscillating Tower Fan and Space Heater (2-in-1) |
| Power Source | Corded Electric |
| Wattage | 1500W |
| Voltage | 120V |
| Noise Level | As low as 32 Decibels |
| Fan Speeds | 3 (Low, Medium, High) |
| Heater Modes | Normal, ECO, Sleep |
| Temperature Range (Heater) | 59°F - 95°F (15°C - 35°C) |
| Timer | 1-12 Hours |
| Oscillation | Yes |
| Safety Features | Overheat Protection, Tip-Over Protection, Bladeless Design, UL Listed |
| Dimensions (D x W x H) | 8.4"D x 10.3"W x 37.9"H |
| Material | Plastic |
| Control Type | Remote Control, Touchpad Control |
Warranty and Support
FOHERE products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official FOHERE website. Please have your model number (NTH15-23ARL) ready when contacting support.
For additional information and product registration, visit: FOHERE Official Store