LEHMANN LGAPW-1814BPA-Z5

Lehmann Hudson Pressure Washer User Manual

Model: LGAPW-1814BPA-Z5 | Brand: LEHMANN

1. Product Overview

The Lehmann Hudson Pressure Washer is a powerful and efficient cleaning tool designed for various domestic cleaning tasks. It features a robust aluminum pump and an energy-efficient motor, providing high performance for cleaning cars, facades, large surfaces, and more.

Key Features:

Lehmann Hudson Pressure Washer with all accessories

Figure 1.1: Lehmann Hudson Pressure Washer with included accessories, including the main unit, spray gun, various nozzles, patio cleaner, and detergent tank.

Diagram of Lehmann Hudson Pressure Washer aluminum pump with specifications

Figure 1.2: Detailed view of the robust aluminum pump, highlighting its 1800W power, 145 bar operating pressure, quick start, 450 l/h water flow, and Auto Stop System.

2. Safety Instructions

Always observe the following safety precautions to prevent injury or damage to the pressure washer.

3. Setup and Assembly

Follow these steps to correctly set up your Lehmann Hudson Pressure Washer.

  1. Unpack Components: Carefully remove all components from the packaging. Verify that all parts listed in the product overview are present and undamaged.
  2. Assemble Handle and Wheels: Attach the handle and wheels to the main unit as per the diagrams in the quick start guide (if applicable).
  3. Connect High-Pressure Hose: Connect one end of the high-pressure hose to the outlet on the pressure washer and the other end to the spray gun. Ensure connections are secure.
  4. Connect Water Supply:
    • From Tap: Connect a garden hose (not included) to your water tap and then to the water inlet on the pressure washer. Ensure the tap is fully open.
    • From External Container (Suction Mode): If using the suction system, place the suction hose (not included) into a clean water source like a bucket or rain barrel. Ensure the hose is fully submerged and free of air bubbles.
    Diagram showing water connection options for pressure washer from tap and bucket

    Figure 3.1: Illustration of connecting the pressure washer to a standard water tap or drawing water from an external container like a bucket.

  5. Connect Power: Plug the power cord into a grounded electrical outlet. Ensure the outlet meets the power requirements of the unit.
  6. Prime the Pump: Before turning on the power, squeeze the trigger on the spray gun to allow water to flow through the system and expel any air. Continue until a steady stream of water emerges.

4. Operating Instructions

Once set up, follow these steps for effective cleaning.

  1. Turn On: Switch the pressure washer to the "ON" position. The motor will start, and the pump will build pressure.
  2. Select Nozzle: Choose the appropriate nozzle for your cleaning task. Different nozzles provide varying spray patterns and pressures.
    • Fan Nozzle: For general cleaning and wider coverage.
    • Rotary Nozzle: For stubborn dirt and concentrated cleaning.
    • Detergent Nozzle: For applying cleaning solutions.
  3. Apply Detergent (Optional): If using detergent, fill the integrated detergent tank with the appropriate cleaning solution. Attach the detergent nozzle. The pressure washer will automatically mix the detergent with water at low pressure.
  4. Begin Cleaning: Hold the spray gun firmly and direct the nozzle at the surface to be cleaned. Maintain a safe distance to avoid damaging the surface.Person using Lehmann Hudson Pressure Washer to clean a surface

    Figure 4.1: An individual demonstrating the use of the pressure washer to clean an outdoor surface, showcasing the powerful water jet.

  5. Using the Patio Cleaner: For large flat surfaces like patios or driveways, attach the patio cleaner accessory. Move it evenly across the surface for consistent cleaning.Person using Lehmann Hudson Pressure Washer with patio cleaner attachment

    Figure 4.2: A user operating the pressure washer with the specialized patio cleaner attachment, designed for efficient cleaning of flat surfaces.

  6. Finish Cleaning: When finished, release the trigger, turn off the pressure washer, and disconnect the power supply. Squeeze the trigger again to release any remaining pressure in the system.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your pressure washer.

6. Troubleshooting

Refer to this section for common issues and their solutions.

ProblemPossible CauseSolution
No water flow or low pressure
  • Water supply off or restricted
  • Air in the pump
  • Clogged nozzle
  • Kinked hose
  • Ensure water supply is fully open and hose is not kinked.
  • Prime the pump by squeezing the trigger with power off until steady water flow.
  • Clean or replace the nozzle.
  • Straighten the hose.
Motor stops frequently
  • Overheating
  • Voltage drop
  • Allow the unit to cool down.
  • Ensure the power supply is stable and adequate.
Water leaks
  • Loose connections
  • Damaged O-rings or seals
  • Tighten all connections.
  • Inspect and replace damaged O-rings or seals.

7. Specifications

SpecificationValue
BrandLEHMANN
Item Model NumberLGAPW-1814BPA-Z5
ManufacturerLehmann
Power SourceElectric Cable
Power TypeElectric Cable
Maximum Pressure220 Bars
Maximum Flow Rate7.5 Liters per minute (450 l/h)
Item Weight8.2 Kilograms
Hose Length5 Meters
Product Dimensions37.5L x 30.1W x 78.7H centimeters
Colorblack/red
Package Dimensions50 x 48 x 32.1 cm
Language (Manual)German, Polish, Italian, English, French
Date First Available on Amazon.com.beFebruary 27, 2024
Spare Parts AvailabilityInformation unavailable on spare parts

8. Warranty and Support

LEHMANN products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty details, please refer to the warranty card included with your product or visit the official LEHMANN website.

For technical support, troubleshooting assistance, or to inquire about spare parts, please contact LEHMANN customer service. Contact information can typically be found on the product packaging or the brand's official website.

Online Resources: For additional information and support, you may visit the LEHMANN brand store on Amazon: LEHMANN Brand Store

Related Documents - LGAPW-1814BPA-Z5

Preview Lehmann Firmware Updater: Operating Instructions for Locks and RFID Readers
This document provides operating instructions for the LEHMANN Firmware Updater software, detailing how to update firmware on Lehmann locks, RFID readers, and terminals. Includes system requirements, compatible products, and step-by-step guidance.
Preview LEHMANN Management Software User Guide: Configuration and Operation
Comprehensive user guide for LEHMANN Management Software (LMS), detailing configuration, operation, and management of LEHMANN RFID systems in both offline and online modes. Covers transponder and lock management, user settings, and system administration.
Preview LEHMANN CNC Rotary Tables - Main Catalog Edition 4 | PGD, E, DD Series
LEHMANN's Main Catalog Edition 4 for CNC Rotary Tables. Explore PGD, E-Series, DD Series, and more. High-speed, backlash-free solutions for industrial automation and precision manufacturing.
Preview LEHMANN M610 LEGIC L043-A03 Electronic Locker Lock Operating Instructions
Comprehensive operating instructions for the LEHMANN M610 LEGIC L043-A03 electronic locker lock, covering installation, programming, operation, maintenance, and troubleshooting.
Preview LEHMANN RFID Kartenprogrammierung: Anleitung und Übersicht
Erfahren Sie, wie Sie LEHMANN RFID-Schließsysteme mit verschiedenen Karten wie Installations-, Master- und User-Karten programmieren. Diese Anleitung erklärt die Betriebsmodi, Funktionen und den Reset-Prozess.
Preview LEHMANN VERTO DIAL LOCK PRIVATE RIGHT (FIX-CODE) - Operating Instructions & User Manual
Comprehensive operating instructions and user manual for the LEHMANN VERTO DIAL LOCK PRIVATE RIGHT (FIX-CODE). Learn how to set, change, and reset the user code, and perform emergency openings.