FIT KING Leg Massager (Model FT-093A) Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your FIT KING Leg Massager (Model FT-093A). This device offers air compression therapy for your feet and calves, designed to support circulation and provide relief from discomfort. Please read this manual thoroughly before operation and retain it for future reference.

Image: The FIT KING Leg Massager (Model FT-093A) showing the two leg wraps and the wired controller.

2. Safety Information

Your safety is paramount. Please adhere to the following guidelines:

• Always read and follow the instructions before use.
• Do not use if you have any injuries, blood clots, or other medical conditions that could be affected by massage.
• Keep the massager clean and dry to prevent electrical hazards.
• Do not use while sleeping or unattended.
• Consult a doctor before use if you are pregnant or have any health concerns.

Do Not Use If You Have:

• Acute conditions (e.g., pulmonary edema, infections, heart failure)
• Blood clots or embolism
• Wounds, tumors, or fractures at/near the application site
• Conditions worsened by increased blood or lymphatic flow
• Arterial insufficiency

Consult a Doctor If You Have:

• Blood clots
• Malignant tumors
• Heart disorders
• Diabetes, Neuropathy
• Pregnancy or puerperium
• Pacemaker or metal implants

Image: Visual representation of conditions requiring doctor consultation or prohibiting use of the massager.

3. Package Contents

Upon unpacking, please ensure all the following items are present:

• 2 x Massage Sleeves (Leg Wraps)
• 1 x Control Unit (Wired Controller)
• 1 x Carrying Bag
• 1 x User Manual

Image: The product packaging displaying the massage sleeves, control unit, carrying bag, and user manual.

4. Product Features

• 360° Air Compression Therapy: Equipped with a large air pump, the FIT KING Compression Boots provide dynamic 360° air compression for your calves and feet. This simulates kneading and squeezing massage to effectively boost circulation, help relieve leg pain, cramps, restless leg syndrome, and edema.


Image: Diagram illustrating the 360° air compression therapy targeting feet and calves to reduce pain and promote blood circulation.

• Customizable Settings: The massager offers 3 time options (20/25/30 minutes), 3 therapy modes (sequence, circulation, combination), and 3 compression intensities. This allows for personalized massage experiences.


Image: The upgraded controller with an intuitive LCD screen displaying modes, intensities, and timer options for easy selection.

• User-Friendly Operation: Features a large, intuitive LCD screen controller for easy selection of modes, intensities, and timer options. The upgraded zipper design simplifies putting on and taking off the compression boots.
• Adaptive Fit for All: Advanced pressure sensor technology automatically adjusts pressure to accommodate different leg sizes, ensuring optimal comfort for various users. Refer to the size chart for suitability.


Image: Diagram showing the dimensions of the leg massager boots for calves (Max 20", Min 16") and feet (Max 15", Min 13"), with a height range of 17-18".

• Durable and Easy to Maintain: Constructed from breathable, sturdy, easy-to-wipe material for simple maintenance and a long lifespan.


Image: Detailed view of the massager's quality features including smooth zippers, 360° full massage capability, foot design, and double stitching.

5. Setup

1. Charge the Device (if applicable): Ensure the device is adequately charged before first use.
2. Wear the Compression Boots:
   • Unzip the leg wraps completely.
   • Slide your feet and calves into the boots.
   • Zip up the boots, ensuring a snug but comfortable fit. The upgraded zipper design makes this process effortless.
3. Connect the Controller: Plug the air hoses from the leg wraps into the designated ports on the wired control unit. Ensure a secure connection.

Image: A person demonstrating how to easily put on the leg massager boot.

6. Operating Instructions

1. Power On: Press the power button on the control unit to turn on the device. The LCD screen will illuminate.
2. Select Mode: Use the "Mode" button to cycle through the 3 available therapy modes:
   • Sequence: Airbags inflate and deflate in a sequential pattern.
   • Circulation: Airbags inflate and deflate to promote overall circulation.
   • Combination: A blend of sequential and circulation patterns.
3. Adjust Intensity: Use the "Intensity" button to select your preferred compression strength from 3 levels (Low, Medium, High).
4. Set Timer: Choose from 3 time options (20, 25, or 30 minutes) using the "Timer" button. The device will automatically shut off after the selected duration.
5. Relax: Once settings are chosen, relax and allow the device to perform the air compression therapy.
6. Power Off: Press the power button again to turn off the device when finished.

Image: A man relaxing on a couch while using the FIT KING Leg Massager, illustrating comfortable use.

Product in Action:

Video: A demonstration of the FIT KING Leg Massager in use, highlighting its features and benefits for muscle recovery and circulation.

7. Maintenance

• Cleaning: The massager is made from breathable, sturdy, easy-to-wipe material. Use a soft, damp cloth to clean the surface. Do not immerse the device in water.
• Storage: Store the massager in its convenient carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Regularly inspect the device for any signs of damage to the cords, plugs, or fabric. If damage is found, discontinue use and contact customer support.

8. Troubleshooting

If you encounter any issues with your FIT KING Leg Massager, please refer to the following common solutions:

• Device not turning on:
  • Ensure the power cable is securely connected to both the control unit and a working power outlet.
  • Check if the power outlet is functional by plugging in another device.
• No compression or weak compression:
  • Verify that the air hoses are securely connected to the leg wraps and the control unit.
  • Ensure the leg wraps are zipped up completely and fit snugly around your legs.
  • Increase the intensity setting on the control unit.
• Uncomfortable pressure:
  • Decrease the intensity setting on the control unit.
  • Ensure the leg wraps are not too tight. Adjust the fit if necessary.
• Device shuts off unexpectedly:
  • The device has an automatic timer. Check the selected time duration.
  • If the issue persists, contact customer support.

9. Specifications

10. Warranty and Support

For warranty information, technical support, or any inquiries regarding your FIT KING Leg Massager, please refer to the contact details provided in the packaging or visit the official FIT KING website. The product includes 24-hour online service as part of its support.