Stokke Flexi Bath X-Large Bundle Instruction Manual

Introduction

The Stokke Flexi Bath X-Large is a spacious, foldable baby bathtub designed for infants and children up to six years of age. This bundle includes a Newborn Support for added comfort and safety for babies up to eight months or 17.6 lbs. Its lightweight and portable design makes it ideal for use at home or while traveling, offering a convenient solution for bath time.

The Flexi Bath X-Large is 25% larger than the original Flexi Bath, providing ample space for your child to enjoy bathing. It features a non-slip base and a heat-sensitive draining plug that changes color to indicate water temperature, enhancing safety. The product is JPMA certified and meets or exceeds ASTM safety standards.

Safety Information

WARNING: Never leave your child unattended in the bathtub, even for a moment. Drowning can occur quickly and in shallow water. Always keep your child within arm's reach.

• Always check the water temperature before placing your child in the bath. The heat-sensitive draining plug provides a visual cue, but always verify with your hand.
• Ensure the bathtub is placed on a stable, flat, and non-slip surface.
• Do not use the bathtub if any parts are damaged or missing.
• Keep all bathing accessories and products out of your child's reach.
• The Newborn Support is suitable for babies up to eight months or 17.6 lbs. Discontinue use once your child can sit up unaided.
• The Flexi Bath is JPMA certified and meets or exceeds ASTM safety standards.

What's Included

Your Stokke Flexi Bath X-Large Bundle includes the following components:

• Stokke Flexi Bath X-Large foldable bathtub
• Stokke Flexi Bath Newborn Support

Setup

1. Unfolding the Bathtub

1. Place the folded Flexi Bath on a flat surface.
2. Gently pull the sides outwards until the bathtub fully expands and locks into its open position.
3. Ensure all four sides are securely extended and the base is flat.

2. Attaching the Newborn Support

1. Position the Newborn Support inside the unfolded Flexi Bath.
2. Align the hooks on the Newborn Support with the designated slots on the rim of the bathtub.
3. Press down firmly until the Newborn Support clicks securely into place.
4. Verify that the support is stable and does not wobble before placing your baby in it.

Setup Video

Operation

1. Filling the Bathtub

• Place the bathtub in a shower, on a non-slip floor, or in a suitable location.
• Ensure the draining plug at the bottom of the tub is securely closed.
• Fill the bathtub with water to the desired level. The heat-sensitive plug will change color if the water is too hot, providing a visual warning. Always test the water temperature with your elbow or wrist before placing your child in the bath.

2. Bathing the Child

• Carefully place your child into the bathtub. If using the Newborn Support, ensure your baby is comfortably and securely positioned.
• The non-slip base provides stability for your child during bath time.
• Always maintain constant supervision and keep your child within arm's reach.

3. Draining the Bathtub

• Once bath time is complete, remove your child from the bathtub.
• Open the draining plug at the bottom of the tub to release the water.

Maintenance

Cleaning

• After each use, wipe the bathtub with a damp cloth and mild soap.
• Rinse thoroughly to remove any soap residue.
• Allow the bathtub to air dry completely before folding and storing.

Storage

• To fold the Flexi Bath, gently push the sides inwards until it collapses flat.
• Secure it with the integrated clasp to keep it folded.
• Store in a dry place. Its compact design allows it to fit in small spaces, such as cabinets or against a wall.

Troubleshooting

• Water temperature issues: If the heat-sensitive plug indicates the water is too hot, add cold water gradually until the plug color changes to warm or blue, and always verify with your hand.
• Bathtub not stable: Ensure the bathtub is fully unfolded and all sides are locked into place. Place it on a flat, even surface.
• Newborn Support not secure: Re-check that the hooks of the Newborn Support are properly aligned and clicked into the designated slots on the bathtub rim.

For any other issues, please refer to the contact information in the Warranty and Support section.

Specifications

Warranty and Support

The Stokke Flexi Bath is JPMA certified, ensuring it meets high safety and quality standards. For specific warranty information, please refer to the documentation included with your product packaging or visit the official Stokke website.

For customer support, product registration, or further inquiries, please contact Stokke directly through their official channels.