Introduction
This manual provides essential information for the installation, operation, and maintenance of your Ubiquiti Pro Max Layer 3 Switch. Please read this manual thoroughly before using the device to ensure proper setup and functionality.
The Ubiquiti Pro Max Layer 3 Switch is a high-performance 24-port switch designed for advanced network environments. It features Layer 3 capabilities and Etherlighting ports for enhanced visibility and management.
Package Contents

The package for your Ubiquiti Pro Max Layer 3 Switch includes the following components:
- Ubiquiti Pro Max Layer 3 Switch (USW-Pro-Max-24)
- Power Cable
- Hardware Kit (for rack mounting)
Image: The Ubiquiti Pro Max Layer 3 Switch shown alongside its power cable and a hardware kit for installation.
Product Overview

The Ubiquiti Pro Max Layer 3 Switch features a comprehensive set of ports and indicators for efficient network management:
- (8) 2.5 GbE RJ45 ports: For high-speed wired connections.
- (16) GbE RJ45 ports: Standard Gigabit Ethernet ports.
- (2) 10G SFP+ ports: For high-bandwidth fiber optic uplinks.
- Etherlighting ports: Ports that illuminate to indicate port location, speed/link status, and native VLAN/network.
- DC power backup ready: Supports external DC power for redundancy.
Image: A detailed front view of the Ubiquiti Pro Max Layer 3 Switch, showing all 24 RJ45 ports and 2 SFP+ ports, along with the Etherlighting indicators.
Setup and Installation
Rack Mounting
The Ubiquiti Pro Max Layer 3 Switch is designed for rack installation. Use the included hardware kit to secure the switch in a standard 19-inch rack.
- Attach the rackmount ears to the sides of the switch using the provided screws.
- Align the switch with the rack posts and secure it using appropriate rack screws (not included, typically supplied with the rack).
Power Connection
Connect the included power cable to the power inlet on the rear of the switch and then to a suitable AC power outlet. The switch is also DC power backup ready for redundant power supply configurations.
Network Connection
Connect your network devices (computers, servers, other switches) to the RJ45 ports. Use the 2.5 GbE ports for devices requiring higher bandwidth and the 10G SFP+ ports for fiber uplinks to your core network.
Operating Instructions
Initial Power On
Once connected to power, the switch will automatically power on. Observe the Etherlighting ports for initial boot-up sequence and status indicators.
Management with UniFi Network
The Ubiquiti Pro Max Layer 3 Switch is managed with UniFi Network version 8.0.24 and later. Ensure you have a UniFi Network controller running to adopt and configure the switch.
- Adoption: Discover and adopt the switch within your UniFi Network controller interface.
- Configuration: Configure VLANs, port settings, link aggregation, and other network parameters through the UniFi Network controller.
- Monitoring: Monitor port status, traffic statistics, and device health from the UniFi Network dashboard.
Etherlighting Indicators
The Etherlighting feature provides visual cues for port status:
- Port Location: Helps identify specific ports quickly.
- Speed/Link: Indicates connection speed (e.g., 1GbE, 2.5GbE, 10GbE) and link activity.
- Native VLAN/Network: Provides visual confirmation of the assigned network or VLAN for a port.
Maintenance
Cleaning
Regularly clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners directly on the device.
Firmware Updates
Keep the switch firmware updated through the UniFi Network controller to ensure optimal performance, security, and access to new features. Refer to the UniFi Network documentation for the latest firmware update procedures.
Environmental Considerations
Ensure the switch is operated within its specified environmental conditions (temperature, humidity) to prevent overheating and ensure longevity. Maintain adequate airflow around the device.
Troubleshooting
- No Power:
Check that the power cable is securely connected to both the switch and the power outlet. Verify the power outlet is functional. If using DC backup, ensure the DC power source is active.
- No Link on Port:
Verify the Ethernet cable is properly connected at both ends. Test with a different cable. Ensure the connected device is powered on and functioning correctly. Check port status in UniFi Network controller.
- Switch Not Adopted in UniFi Network:
Ensure the UniFi Network controller is running and accessible from the same network segment as the switch. Check firewall settings. Try resetting the switch to factory defaults (refer to UniFi documentation for procedure).
- Slow Network Performance:
Check for network congestion. Verify cable quality and length. Ensure connected devices are operating at their expected speeds. Review UniFi Network controller for any alerts or high utilization on ports.
Specifications
| Feature | Detail |
|---|---|
| Model | USW-Pro-Max-24 |
| Switch Type | Layer 3 |
| Total Ports | 24 RJ45, 2 SFP+ |
| RJ45 Ports | (8) 2.5 GbE, (16) GbE |
| SFP+ Ports | (2) 10G |
| Data Transfer Rate | Up to 2.5 Gbps per RJ45 port, 10 Gbps per SFP+ port |
| Management | UniFi Network 8.0.24 and later |
| Power | AC Power, DC Power Backup Ready |
| Case Material | Metal |
| Dimensions (Package) | 20.38 x 17 x 4.88 inches |
| Item Weight | 11.92 pounds |
| Included Components | Power Cable, Hardware Kit |
Warranty Information
Ubiquiti Networks products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Ubiquiti Networks website or the warranty card included with your product. Keep your proof of purchase for warranty claims.
Support
For technical support, documentation, and community forums, please visit the official Ubiquiti Networks support portal:
You can also find additional resources and frequently asked questions on their website.