1. Introduction
Thank you for purchasing the ODK L-Shaped Gaming Desk. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new desk. Please read this manual thoroughly before assembly and retain it for future reference.
Image 1.1: The ODK L-Shaped Gaming Desk in a typical gaming environment, showcasing its spacious design and integrated features.
2. Safety Information
- Ensure all components are present and undamaged before beginning assembly. Do not use if any parts are missing or damaged.
- Assemble the desk on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly to avoid damaging the material.
- Keep small parts away from children to prevent choking hazards.
- Do not exceed the maximum load capacity of 50 kg for the desktop.
- Ensure all electrical connections (power outlets, USB ports) are properly grounded and used with compatible devices.
- Avoid placing hot items directly on the desk surface without protection.
3. Package Contents
Verify that all parts listed below are included in your package. A wrench is provided for assembly.
- Desktop panels (L-shaped sections)
- Steel frame components
- Adjustable monitor stand components
- Two integrated drawers
- Storage shelves and racks
- Power strip with 2 AC outlets and 2 USB ports (5V-2A)
- RGB LED light strip with controller
- Headphone hook
- Assembly hardware (screws, bolts, adjustable feet)
- Assembly wrench
- Instruction manual
4. Assembly Instructions
Assembly is required for this product. Follow the included detailed instruction manual step-by-step. The rack and drawers can be installed on either the left or right side to suit your preference and room layout.
Image 4.1: Dimensional overview and reversible design of the desk, illustrating how the storage unit can be positioned on either side.
4.1. General Assembly Tips
- Identify all parts before starting.
- Use the provided wrench for tightening fasteners.
- Do not fully tighten all screws until the entire structure is loosely assembled. This allows for minor adjustments.
- Once the desk is fully assembled, tighten all screws securely.
4.2. Adjustable Feet Installation
The desk is equipped with adjustable feet to ensure stability on uneven surfaces. Install these feet at the bottom of the desk legs. Rotate them clockwise to extend and counter-clockwise to retract until the desk is level and stable.
Image 4.2: Detail of the adjustable feet, which allow for leveling the desk on uneven floors.
5. Operating Instructions
5.1. Power Outlets and USB Ports
The desk includes a built-in power strip with two AC outlets (100-240V/15A) and two USB ports (5V-2A). Connect the desk's power cord to a wall outlet. These ports provide convenient charging for your computer, smartphone, and other electronic devices.
Image 5.1: The integrated power strip, showing the AC outlets and USB ports for device charging.
5.2. RGB LED Lighting
The desk features an RGB LED light strip to enhance your gaming or work environment. Use the included controller to switch between 10 different lighting modes and adjust colors. The light system includes a memory function that retains the last selected mode when turned off and on again.
Image 5.2: The remote control for the RGB LED lighting, illustrating the various color and mode selections.
5.3. Adjustable Monitor Stand
The monitor stand can be adjusted to three different heights: 9cm, 12cm, and 15cm. Adjust the height according to your preference to improve posture and reduce strain on your neck and shoulders during long periods of use.
Image 5.3: The adjustable monitor stand, demonstrating the three height options for ergonomic positioning.
5.4. Storage Drawers
The desk includes two integrated drawers for organized storage of books, documents, and other office supplies. These drawers are designed for easy access and contribute to a tidy workspace.
Image 5.4: The integrated drawers, providing convenient storage for various items.
6. Maintenance
- Cleaning: Wipe the desk surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the melamine finish.
- Spills: Immediately wipe up any spills to prevent water damage or staining. The melamine board is resistant to water, but prolonged exposure should be avoided.
- Fasteners: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary to maintain stability.
- Electrical Components: Ensure the power cord and connections are free from damage. Do not attempt to repair electrical components yourself.
7. Troubleshooting
7.1. Desk is Unstable/Wobbly
- Check Adjustable Feet: Ensure all adjustable feet are making firm contact with the floor and are adjusted to level the desk.
- Tighten Fasteners: Verify that all assembly screws and bolts are securely tightened.
- Cross Bracing: Confirm that the cross-bracing hardware is correctly installed and tightened, as this significantly contributes to stability.
7.2. RGB LED Lights Not Working
- Power Connection: Ensure the LED light strip is properly connected to its power source and the desk's main power.
- Controller Battery: If the controller is wireless, check its battery.
- Reset: Try unplugging the desk from the wall outlet for a few minutes, then plug it back in to reset the electrical components.
7.3. Power Outlets/USB Ports Not Functioning
- Main Power: Ensure the desk's main power cord is securely plugged into a working wall outlet.
- Device Compatibility: Verify that the devices you are trying to charge are compatible with the provided voltage and amperage.
- Overload: Avoid overloading the power strip. If too many high-power devices are connected, it may trip a circuit.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | ODK |
| Model | B0CWH3746N |
| Shape | L-shaped |
| Color | White |
| Overall Dimensions | Approx. 135 cm (Width) x 110 cm (Depth) x 76 cm (Height) |
| Product Weight | Approx. 25.2 kg |
| Desktop Load Capacity | 50 kg |
| Material | High-strength Melamine Faced Board, Steel Frame |
| Power Outlets | 2 x AC (100-240V/15A) |
| USB Ports | 2 x USB (5V-2A) |
| Monitor Stand Adjustment | 3 levels (9cm, 12cm, 15cm) |
| LED Lighting | RGB, 10 lighting modes, memory function |
| Assembly | Customer assembly required (wrench included) |
9. Warranty and Support
ODK provides customer support for product defects. If you encounter any issues or have questions regarding your ODK L-Shaped Gaming Desk, please do not hesitate to contact us. Refer to your purchase documentation for specific warranty terms and contact information.
For assistance, please contact ODK customer service through the platform where you purchased the product or visit the official ODK website.
