Jebao DEP-1000 Bluetooth Submersible Vario DC Pump Instruction Manual

1. Introduction

1.1 Product Overview

The Jebao DEP-1000 is a high-efficiency, energy-saving submersible DC pump designed for both saltwater and freshwater aquarium environments. It utilizes advanced frequency conversion electronic technology to achieve significant energy savings and operates with an ultra-quiet sine wave technology. The pump features a Bluetooth connection for APP control and a visual LCD display for manual adjustments. Key functionalities include a 10-minute feeding suspension and a delayed restart feature.

1.2 Key Features

• Bluetooth connection for APP control.
• Manual and APP control system with a visual LCD display.
• Bottom-suction water intake for low water-level operation.
• Sine wave technology for ultra-quiet operation.
• IC electronic detection for dry/locked rotor protection.
• Feeding suspension function for 10 minutes.
• Suitable for saltwater and freshwater conditions without copper elements.

2. Safety Instructions

Please read and understand all safety instructions before operating this pump. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always disconnect the power supply before performing any maintenance or installation.
• This pump is designed for submersible use only. Do not operate it dry.
• Ensure the power cord and plug are in good condition. Do not use if damaged.
• Do not use this pump in flammable liquids or environments.
• The pump is intended for indoor use in aquariums.
• Ensure the voltage supplied matches the pump's requirements (110 volts).
• Keep the controller and power adapter away from water.
• Children should be supervised to ensure they do not play with the appliance.

3. Package Contents

Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, please contact your retailer.

• Jebao DEP-1000 DC Pump
• LED Screen Display Controller with Bluetooth function
• Power Adapter
• Hose Adapters (1/2", 5/8" for outlet; 3/4", 1" for intake)
• User Manual

4. Setup Guide

4.1 Pump Placement and Hose Connection

1. Choose Location: Place the pump fully submerged in your aquarium or sump. Ensure it rests on a stable, flat surface. The bottom-suction design allows for operation in low water levels.
2. Attach Outlet Hose: Select the appropriate hose adapter (1/2" or 5/8") for your plumbing and securely attach it to the pump's outlet. Connect your return plumbing hose to this adapter.
3. Attach Intake Hose (Optional): If using an intake hose, select the appropriate adapter (3/4" or 1") and attach it to the pump's intake.

4.2 Electrical Connection

1. Connect the pump's cable to the LED screen display controller.
2. Connect the power adapter to the LED screen display controller.
3. Plug the power adapter into a standard 110-volt electrical outlet.
4. Ensure a drip loop is formed with the power cord to prevent water from traveling along the cord and reaching the electrical outlet.

4.3 Bluetooth Pairing (APP Control)

1. Download the official Jebao/Jecod APP from your device's app store.
2. Ensure Bluetooth is enabled on your mobile device.
3. Open the APP and follow the on-screen instructions to search for and pair with your DEP-1000 pump. The controller's LCD display will indicate successful pairing.

5. Operating Instructions

5.1 Power On/Off

• Once connected to power, the pump will automatically turn on and display its current settings on the LCD screen.
• To turn off the pump, press the power button on the controller or use the APP. Press again to turn on.

5.2 Adjusting Flow Rate

• Manual Control: Use the '+' and '-' buttons on the controller to increase or decrease the flow rate. The LCD screen will show the current setting.
• APP Control: Open the Jebao APP on your paired device. Navigate to the pump control interface and use the sliders or buttons to adjust the flow rate.

5.3 Feeding Suspension Function

The pump features a 10-minute feeding suspension mode to allow for feeding without water circulation. During this mode, the pump will temporarily stop and then automatically resume operation after 10 minutes.

• Activate: Press the 'FEED' button on the controller or select the feeding mode in the APP.
• Deactivate: The pump will automatically restart after 10 minutes. To manually resume earlier, press the 'FEED' button again.

5.4 Delayed Restart

The pump incorporates a delayed restart function to prevent damage from power fluctuations or brief power outages. After a power interruption, the pump will wait a short period before restarting to ensure stable power supply.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your pump.

1. Disconnect Power: Always unplug the pump from the power outlet before performing any maintenance.
2. Clean Impeller: Periodically remove the pump's front cover and impeller assembly. Clean any debris, algae, or calcium buildup from the impeller and its housing using a soft brush and warm water. For stubborn calcium deposits, a mild vinegar solution can be used. Rinse thoroughly.
3. Inspect Casing: Check the pump casing and intake screen for any blockages or damage. Clean as necessary.
4. Check Connections: Ensure all hose connections are secure and free from leaks.
5. Reassemble: Carefully reassemble the pump, ensuring all parts are correctly seated.

7. Troubleshooting

8. Specifications

9. Warranty Information

Specific warranty details for the Jebao DEP-1000 pump are not provided in this manual. For information regarding warranty coverage, duration, and claims, please refer to the product packaging or contact the manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.

10. Customer Support

If you encounter any issues or have questions not covered in this manual, please contact Jebao customer support. Contact information can typically be found on the product packaging, the manufacturer's official website, or through your retailer.

Manufacturer: Jebao