BLOW RK1 FM/DAB Kitchen Radio User Manual

1. Introduction

Thank you for purchasing the BLOW RK1 FM/DAB Kitchen Radio. This manual provides essential information for the safe and efficient operation of your new device. Please read these instructions carefully before use and retain them for future reference.

2. Safety Information

• Do not expose the device to rain, moisture, or extreme temperatures.
• Avoid placing the radio near heat sources or in direct sunlight.
• Ensure proper ventilation; do not cover ventilation openings.
• Use only the specified power adapter.
• Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
• Keep out of reach of children.

3. Package Contents

Please check that all items are present:

• BLOW RK1 FM/DAB Kitchen Radio
• Power Adapter
• User Manual
• (Possible additional items like an Aux cable, depending on specific model packaging)

4. Product Overview

Figure 1: Front view of the BLOW RK1 FM/DAB Kitchen Radio. The radio features a digital display on the left, showing "Digital Radio" and icons for DAB, FM, and Bluetooth. To the right of the display are control buttons arranged in two rows. The top row includes up/down navigation buttons and five numbered preset buttons (1-5). The bottom row includes Mode, Menu/Info, Preset, and Timer/Sleep buttons. On the far right is a large rotary knob with an "ENTER" function, used for navigation and selection.

Control Panel Layout:

1. Display Screen: Shows current mode, station information, time, and menu options.
2. Up/Down Buttons (▲ / ▼): Navigate through menus, adjust volume, or tune stations.
3. Preset Buttons (1-5): Store and recall favorite radio stations.
4. MODE Button: Switches between DAB, FM, and Auxiliary input modes.
5. MENU/INFO Button: Accesses system settings or displays detailed station information.
6. PRESET Button: Used for saving and recalling presets.
7. TIMER/SLEEP Button: Sets sleep timer or alarm functions.
8. Rotary Knob / ENTER: Rotate to navigate menus or adjust settings; press to confirm selections.

5. Setup

5.1 Power Connection

1. Connect the power adapter to the DC input port on the back of the radio.
2. Plug the power adapter into a standard wall outlet.
3. The radio will power on or enter standby mode.

5.2 Antenna

Extend the telescopic antenna fully for optimal FM and DAB reception. Adjust its position to improve signal strength if needed.

6. Operating Instructions

6.1 Power On/Off

Press the Rotary Knob / ENTER button briefly to turn the radio on or off (standby mode).

6.2 Mode Selection

Press the MODE button repeatedly to cycle through available modes: DAB Radio, FM Radio, and Auxiliary Input.

6.3 DAB Radio Operation

1. Initial Scan: The first time you use DAB mode, the radio will automatically perform a full scan for available stations. This may take a few minutes.
2. Station Selection: Once the scan is complete, rotate the Rotary Knob to browse through the list of available DAB stations. Press the Rotary Knob / ENTER button to select a station.
3. Manual Scan: To perform a manual scan, press the MENU/INFO button, navigate to "Scan" or "Full Scan" using the Rotary Knob, and press ENTER.
4. Saving Presets: Tune to your desired DAB station. Press and hold the PRESET button until "Preset Store" appears on the display. Rotate the Rotary Knob to select a preset number (1-5), then press ENTER to save.
5. Recalling Presets: Briefly press the PRESET button. Rotate the Rotary Knob to select the desired preset number, then press ENTER. Alternatively, use the dedicated Preset Buttons (1-5) to directly recall saved stations.
6. Information Display: Press the MENU/INFO button repeatedly to cycle through various information displays, such as program type, signal strength, and bit rate.

6.4 FM Radio Operation

1. Auto Scan: In FM mode, press and hold the Rotary Knob / ENTER button to initiate an automatic scan for FM stations. The radio will stop at the next strong station.
2. Manual Tuning: Rotate the Rotary Knob to manually tune to a specific FM frequency.
3. Saving Presets: Tune to your desired FM station. Press and hold the PRESET button until "Preset Store" appears. Rotate the Rotary Knob to select a preset number (1-5), then press ENTER to save.
4. Recalling Presets: Briefly press the PRESET button. Rotate the Rotary Knob to select the desired preset number, then press ENTER. Alternatively, use the dedicated Preset Buttons (1-5) to directly recall saved stations.

6.5 Auxiliary Input (AUX)

To play audio from an external device (e.g., smartphone, MP3 player):

1. Connect a 3.5mm audio cable (not included) from your external device's headphone jack to the AUX input port on the radio.
2. Press the MODE button until "AUX Input" or similar appears on the display.
3. Control playback and volume from your external device.

6.6 Timer and Sleep Function

Press the TIMER/SLEEP button to access sleep timer settings. Rotate the Rotary Knob to select the desired sleep duration (e.g., 15, 30, 60 minutes), then press ENTER to confirm. The radio will automatically turn off after the set time.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the radio's surface. Do not use abrasive cleaners or solvents.
• Storage: If not in use for an extended period, unplug the radio and store it in a cool, dry place.

8. Troubleshooting

9. Specifications

• Brand: Blow
• Model: RK1 (Product Code: 77-570)
• Color: Black
• Connectivity Technology: Auxiliary
• Tuner Technology: FM, DAB
• Power Source: Corded Electric
• Supported Radio Bands: FM, DAB
• Item Weight: 904 Grams
• Compatible Devices: 3.5mm audio devices
• International Article Code (EAN): 05900804134169

10. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.