Bissell CleanView Swivel Rewind Vacuum (Model 3837) Instruction Manual

Introduction

Thank you for choosing the Bissell CleanView Swivel Rewind Vacuum. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new vacuum cleaner. Designed for powerful cleaning, this model features advanced technologies like the Triple Action Brush Roll, Swivel Steering, and Multi-Cyclonic Suction to effectively remove dirt and pet hair from various surfaces. Please read all instructions carefully before use.

Important Safety Instructions

When using an electrical appliance, basic precautions should be observed, including the following:

• Always connect to a properly grounded outlet.
• Unplug from outlet when not in use and before cleaning or servicing.
• Do not leave appliance when plugged in.
• Do not use with damaged cord or plug.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Use only as described in this manual. Use only manufacturer's recommended attachments.

Product Overview & Components

Familiarize yourself with the parts of your Bissell CleanView Swivel Rewind Vacuum.

Main Unit: The complete vacuum cleaner, showcasing its sleek design and integrated components.

Triple Action Brush Roll: Designed to loosen, lift, and remove embedded dirt and pet hair from multiple surfaces.

Automatic Cord Rewind: For quick and easy storage of the power cord with a simple press of a button.

Swivel Steering: Allows for maximum maneuverability to clean around furniture and corners with ease.

Active Extension Wand: Extends to clean hard-to-reach areas such as ceilings, corners, and high shelves.

TurboEraser Upholstery Tool: Specifically designed to easily clean up pet hair from upholstery and other fabric surfaces.

Multi-Cyclonic Suction System: Provides maximum performance from start to finish by separating dirt and debris from the airflow.

Easy-Empty Dirt Tank: A bagless design with a transparent tank for easy monitoring of dirt levels and convenient emptying.

Crevice Tool: A narrow attachment for cleaning tight spaces, corners, and edges.

Dusting Brush: A soft-bristled brush for delicate surfaces, furniture, and blinds.

Setup

Follow these steps to assemble your vacuum cleaner before first use.

1. Attach Handle: Insert the handle assembly into the main vacuum body until it clicks securely into place.
2. Connect Hose: Connect the flexible hose to the hose inlet on the back of the vacuum. Ensure it is firmly attached.
3. Store Tools: Attach the Extension Wand, TurboEraser Upholstery Tool, Crevice Tool, and Dusting Brush to the designated storage clips on the vacuum.

Operating Instructions

Learn how to effectively use your vacuum for various cleaning tasks.

1. Powering On/Off: Plug the power cord into a grounded outlet. Press the red power button located near the base of the vacuum to turn it on or off.
2. Adjusting Height: Use the height adjustment dial on the vacuum's base to select the appropriate setting for your floor type (e.g., low for bare floors, high for thick carpets).
3. Using Swivel Steering: Gently twist the handle to activate the swivel steering, allowing you to easily maneuver around furniture and obstacles.
4. Using Attachments: Release the extension wand from its storage clip and attach the desired tool (e.g., Crevice Tool for tight spaces, TurboEraser for pet hair on upholstery). Connect the hose to the wand for extended reach.
5. Automatic Cord Rewind: To retract the power cord, press the automatic cord rewind button located on the side of the vacuum.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your vacuum cleaner.

1. Emptying the Dirt Tank: When the dirt tank is full, or suction power decreases, press the release button to detach the tank. Hold it over a trash bin and press the bottom release button to empty contents. Reattach securely.
2. Cleaning Filters: The vacuum features a HEPA filter. Remove the filter from the dirt tank assembly. Tap it gently over a trash bin to remove loose debris. Rinse with water if necessary and allow to air dry completely before reinserting.
3. Cleaning Brush Roll: Periodically check the Triple Action Brush Roll for tangled hair or debris. Unplug the vacuum, turn it over, and carefully cut away any wrapped hair or threads using scissors.

Image: Easy-Empty Dirt Tank. This image shows the process of detaching and emptying the dirt tank, highlighting its user-friendly design.

Troubleshooting

If you encounter any issues with your vacuum, refer to the following common problems and solutions:

• No Power: Check if the power cord is securely plugged into a working outlet. Inspect the cord for any damage.
• Loss of Suction: Ensure the dirt tank is not full and is properly seated. Check for blockages in the hose, filters, or brush roll. Clean or replace filters as needed.
• Brush Roll Not Turning: Unplug the vacuum and check the brush roll for obstructions like tangled hair or debris. Ensure the belt is intact and properly aligned.

Specifications

Warranty & Support

For warranty information, product registration, or customer support, please refer to the official Bissell website or contact their customer service. Keep your purchase receipt for warranty claims.