Introduction
Thank you for choosing the Eskimo Wide 1™ Thermal Ice Fishing Shelter and the accompanying 50" Tub Travel Cover. This product is designed to provide a comfortable and efficient ice fishing experience. The Wide 1™ Thermal shelter features an exclusive expandable design, offering up to 32% more fishable area, and is fully insulated with Eskimo IQ (Insulated Quilted) fabric to retain heat and reduce condensation. The included travel cover is made from durable 300 denier fabric, ensuring secure transport of your sled shelter.
Figure 1: Eskimo Wide 1™ Thermal Ice Fishing Shelter and 50" Tub Travel Cover.
Safety Information
Always prioritize safety when using your ice fishing shelter. Failure to follow these guidelines may result in injury or damage to the product.
- Ventilation: When using a heater inside the shelter, ensure adequate ventilation to prevent carbon monoxide buildup. Always open a window or vent.
- Fire Hazard: Keep all flammable materials away from heaters and open flames. Do not use open flame devices directly against the shelter fabric.
- Ice Conditions: Always verify ice thickness and stability before setting up your shelter. Never set up on unsafe ice.
- Wind: Secure the shelter properly in windy conditions using ice anchors or tie-downs to prevent it from blowing away.
- Sharp Objects: Be cautious of sharp objects like auger blades or ice picks that could damage the shelter fabric.
- Children and Pets: Keep children and pets supervised around the shelter, especially during setup and takedown.
Package Contents
Verify that all components are present before beginning assembly or use:
- Eskimo Wide 1™ Thermal Sled Shelter
- 50" Tub Travel Cover
- Assembly Hardware (pre-attached or in a separate bag)
- User Manual (this document)
Setup Instructions
1. Unpacking and Initial Inspection
Carefully remove all components from the packaging. Inspect the shelter fabric, frame, and travel cover for any signs of damage that may have occurred during shipping. If any damage is found, do not proceed with setup and contact customer support.
Figure 2: The Eskimo Wide 1™ Thermal Shelter in its compact, unpacked state.
2. Assembling the Shelter Frame
The Eskimo Wide 1™ Thermal shelter features a quick-set frame. Follow these steps to extend and lock the frame into position:
- Place the sled base on a flat, stable surface.
- Locate the main support poles. Gently pull them upwards and outwards until they click into their locked positions.
- Ensure all frame joints are fully extended and securely locked. The fabric will become taut as the frame is extended.
Figure 3: A user inspecting the shelter during the setup process, ensuring all components are correctly aligned.
Operating Instructions
1. Deploying the Shelter on Ice
Once the frame is assembled, the shelter is ready for deployment on the ice:
- Drag the sled to your desired fishing location on the ice.
- Open the front zipper door and enter the shelter.
- From inside, you can adjust the expandable wide-bottom design by pushing out the side walls to maximize fishable area.
- Secure the shelter to the ice using ice anchors (not included) through the designated anchor points to prevent movement, especially in windy conditions.
Figure 4: A user deploying the Eskimo Wide 1™ Thermal Shelter on the ice, showing the interior space.
2. Using the 50" Tub Travel Cover
The travel cover protects your sled and its contents during transport and storage.
- Ensure the shelter is collapsed and stored securely within the sled tub.
- Place the travel cover over the sled tub, aligning the reinforced corners with the tub's edges.
- Pull the elastic band around the rim of the tub to ensure a snug and secure fit.
- Verify that the cover is fully seated and will not dislodge during transport.
Figure 5: The 50" Tub Travel Cover securely fitted over the sled, ready for transport.
Figure 6: Detailed view of the durable 300 denier fabric of the travel cover, showing its fit on the sled in a snowy environment.
Maintenance and Care
Cleaning the Shelter and Cover
- After each use, remove any snow, ice, or debris from the shelter fabric and sled.
- If cleaning is necessary, use a mild soap and water solution with a soft brush or cloth. Do not use harsh chemicals or abrasive cleaners.
- Rinse thoroughly with clean water.
Storage
- Ensure the shelter and travel cover are completely dry before folding and storing to prevent mold and mildew.
- Store the shelter in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid storing heavy objects on top of the folded shelter or sled to prevent damage to the frame or fabric.
Troubleshooting
This section addresses common issues you might encounter with your Eskimo Wide 1™ Thermal Shelter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Shelter frame not locking into place. | Poles not fully extended or debris in joints. | Ensure poles are fully extended until they click. Check for and remove any obstructions in the joints. |
| Excessive condensation inside shelter. | Insufficient ventilation, high humidity. | Open a window or vent slightly to allow air circulation. Ensure proper ventilation, especially when using a heater. |
| Travel cover does not fit securely. | Shelter not fully collapsed or items protruding from tub. | Ensure all shelter components are fully collapsed and stored within the tub. Rearrange contents to be flush with the tub rim. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Name | Eskimo Wide 1™ Thermal |
| Product Type | Ice Fishing Sled Shelter + Travel Cover |
| Dimensions (Shelter) | 52" x 97" x 60.50" (approximate deployed) |
| Fishable Area | 14.8 square feet |
| Insulation | Eskimo IQ (Insulated Quilted) fabric |
| Interior Color | Gray |
| Travel Cover Material | Durable 300 Denier Fabric |
| Travel Cover Fit | 50" Tub with Elastic Band and Reinforced Corners |
| Material (General) | Nylon, Elastic, Reinforced Corners |
Warranty and Support
Eskimo products are built with quality and durability in mind. For specific warranty information regarding your Eskimo Wide 1™ Thermal Shelter and Travel Cover, please refer to the warranty card included with your purchase or visit the official Eskimo website.
For technical support, replacement parts, or any questions not covered in this manual, please contact Eskimo customer service. You can find contact information and additional resources on the official Eskimo website: www.geteskimo.com.
When contacting support, please have your product model number (41350) and purchase date available.
