Product Overview
The Linke LED PIR Floodlight is an advanced outdoor security light designed for enhanced illumination and motion detection. It features high-quality explosion-proof tempered glass for superior light transmittance, providing a brighter and more thorough lighting experience. This model, FLB025, comes with a remote control for convenient operation and offers multiple lighting modes and adjustable settings to suit various outdoor lighting needs.
Image: The Linke FLB025 security light, showcasing the main floodlight unit, the integrated PIR motion sensor, and the included remote control for easy adjustments.
Package Contents
- Linke LED PIR Floodlight (FLB025)
- Remote Control
- Mounting Hardware (screws, anchors)
- User Manual (this document)
Setup and Installation
Proper installation is crucial for the optimal performance and safety of your Linke security light. It is recommended to have a qualified electrician perform the wiring if you are not familiar with electrical installations.
1. Mounting the Floodlight
- Choose a Location: Select a suitable outdoor location such as a garden, garage, balcony, pathway, or patio. Ensure the area provides adequate coverage for the light and the motion sensor.
- Secure the Bracket: Use the provided mounting hardware to securely attach the floodlight's mounting bracket to a wall or desired surface.
- Adjust Angle: Once mounted, adjust the angle of the floodlight and the PIR sensor to cover the desired area. The sensor has a 180° detection angle.
Image: Illustration showing the PIR floodlight's sensing distance, which can extend up to 12 meters (39.37 ft), and its wide 180° sensor angle, ideal for covering large outdoor areas like driveways.
2. Electrical Connection
- Ensure the power supply is turned off at the circuit breaker before beginning any wiring.
- Connect the floodlight's wires to your electrical system according to local electrical codes. This is a corded electric device.
- Once wired, restore power to test the light.
3. Initial Remote Control Setup
The Linke floodlight is designed for easy operation via its remote control, offering a safer and more convenient alternative to manual button controls, especially for lights mounted at height.
Image: A comparison highlighting the convenience and safety of using the remote control for the Linke floodlight versus traditional button controls, which may require ladders for adjustment.
Insert batteries into the remote control (batteries not included, typical AAA or CR2032). The remote control allows for easy adjustment of settings from a distance of up to 39 feet.
Operating Instructions
The remote control provides comprehensive control over the floodlight's functions.
Image: Detailed layout of the remote control, illustrating buttons for ON/OFF, constant light mode, night induction mode, 24-hour induction mode, brightness adjustment, sensing distance adjustment, and timing functions (45s, 90s, 120s, 5min, 10min, 1H, 2H, 3H).
Working Modes
The floodlight offers three distinct working modes:
- Constant Light Mode (ON/OFF button): The light will stay on continuously, regardless of motion detection. Press the ON/OFF button on the remote to toggle this mode.
- Night Induction Mode (Moon icon button): The light will only activate at night when motion is detected.
- 24-Hour Induction Mode (Sun/Moon icon button): The light will activate both during the day and night when motion is detected.
Image: Visual representation of the three lighting modes: Constant Light mode (always on), Night Induction mode (activates only at night with motion), and 24-hour Induction mode (activates day and night with motion).
Adjusting Settings with Remote Control
- Brightness Adjustment: Use the Decrease Brightness and Increase Brightness buttons (sun icons) to adjust the light intensity.
- Sensing Distance: Use the Decrease Sensing Distance and Increase Sensing Distance buttons (signal icons) to set the motion detection range. The maximum detection range is 12 meters.
- Lighting Time: Select the duration the light stays on after motion detection using the dedicated buttons: 45s, 90s, 120s, 5min, or 10min.
- Timing Function: For continuous lighting for a set period, use the timing function buttons: 1H (1 hour), 2H (2 hours), or 3H (3 hours).
Maintenance
The Linke FLB025 floodlight is designed for durability and minimal maintenance, thanks to its IP66 waterproof rating and robust construction.
Image: Demonstrates the floodlight's resilience against various weather conditions, including heavy rain (IP66 waterproof), high temperatures (heat resistance), and freezing conditions (frost resistance), making it suitable for year-round outdoor use.
- Cleaning: Periodically wipe the light fixture and sensor lens with a soft, damp cloth to remove dust, dirt, or debris that may accumulate and affect performance. Do not use abrasive cleaners.
- Inspection: Regularly inspect the wiring and mounting for any signs of wear, damage, or loosening.
- Weather Resistance: The IP66 rating ensures complete protection against dust ingress and strong water jets, allowing the light to function reliably in various extreme weather conditions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, faulty wiring, light sensor malfunction, or bulb failure. | Check power supply and circuit breaker. Verify wiring connections. Ensure the light sensor is not obstructed or covered. If the light is in an induction mode, ensure there is motion. |
| Motion sensor not working or inconsistent. | Sensor obstructed, incorrect sensitivity setting, or environmental interference. | Clear any obstructions from the sensor lens. Adjust the sensing distance using the remote control. Avoid placing the light near heat sources or reflective surfaces that might trigger the sensor. |
| Remote control not responding. | Dead batteries, remote out of range, or signal interference. | Replace the remote control batteries. Ensure you are within the 39ft operating range. Remove any large obstructions between the remote and the light. |
| Light stays on continuously in induction mode. | Incorrect mode selected, continuous motion detected, or sensor malfunction. | Verify that the correct induction mode (Night or 24-Hour) is selected. Check for constant motion within the sensor's range. If the issue persists, the sensor may require professional inspection. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Linke |
| Model Number | FLB025 |
| Wattage | 25.0 Watts |
| Luminous Flux | 2100 Lumens |
| Color Temperature | 2700K (Warm White) |
| Lighting Angle | 120° |
| PIR Sensor Angle | 180° |
| PIR Detection Range | Up to 12 meters (39ft) |
| IP Rating | IP66 (Waterproof and Dustproof) |
| Material | Glass (tempered) |
| Color | Black |
| Product Dimensions | 15 x 4 x 12 cm |
| Weight | 500 g |
| Power Source | Corded Electric |
| Indoor/Outdoor Use | Outdoor |
| Specific Uses | Garden, Garage, Balcony, Pathway, Patio |
Warranty and Support
Linke provides a comprehensive warranty for your security lights:
- Warranty Period: Two (2) years for replacement.
- Return/Refund Period: Three (3) months for return and refund.
If you encounter any problems with your Linke LED PIR Floodlight, please contact our after-sales service directly. We are committed to providing prompt assistance and ensuring your satisfaction.
For support, please refer to the contact information provided with your purchase or visit the official Linke website.
Applications
The Linke FLB025 floodlight is versatile and suitable for various outdoor lighting applications, providing bright and reliable illumination.
Image: Examples of the Linke floodlight in various outdoor settings, including forecourts, backyards, garages, and pathways, demonstrating its wide range of practical uses.
