Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your SYNLETT Portable Caregiver Pager Replacement Receiver. This accessory is designed to integrate seamlessly with your existing SYNLETT Simple Alert System, ensuring reliable communication. Please read this manual thoroughly before use to ensure proper functionality and safety.
Product Overview
The SYNLETT Portable Caregiver Pager is a wireless receiver designed as a replacement or additional unit for your Simple Alert System. It features adjustable volume levels and multiple alert tones to suit various user environments. The pager is equipped with a belt clip for portability and can also be placed on a flat surface.
Image: The SYNLETT Pager can be placed on a desk, clipped to a belt, and features 3 adjustable volume levels.
Key Features:
- Replacement/Add-on Receiver: Specifically designed to replace a lost or broken pager, or to expand your existing SYNLETT Simple Alert Caregiver Pager kit.
- Portable Design: Includes a belt clip for easy carrying or can be placed on any flat surface.
- Adjustable Volume: Three adjustable volume levels to select the appropriate sound for your environment.
- Multiple Alert Tones: Switch between 'DINGDONG' for a chime/doorbell alert or 'ALARM' for a continuous siren.
- Wireless Range: Effective wireless signal range up to 300 feet in open areas.
Setup
Battery Installation:
- Locate the battery compartment on the back of the pager.
- Open the battery compartment cover.
- Insert 2 AA batteries (included), ensuring correct polarity (+/-).
- Remove any insulating tabs from the battery compartment if present.
- Close the battery compartment cover securely.
Image: The pager requires 2 AA batteries for operation, which are included in the package.
Once batteries are installed, the pager is ready to function and can be paired with your existing call buttons or motion sensors.
Pairing Your Pager with Components
This section guides you through pairing your new or replacement pager with existing call buttons and motion sensors. Ensure all components have fresh batteries installed before beginning the pairing process.
General Pairing Procedure (Multiple Components to Multiple Pagers):
This video demonstrates how to pair multiple call buttons and motion sensors to two pagers simultaneously. This is useful when integrating a new receiver into an existing system with several alert components.
Video: Instructions on how to pair two SYNLETT pagers with three different components, including call buttons and a motion sensor. The video demonstrates clearing existing pairings and then linking new components to the pagers, followed by testing the connections.
Pairing Additional Call Buttons to a Pager:
If you are adding new call buttons to your pager, follow the steps outlined in this video. This process ensures your pager recognizes and responds to new alert buttons.
Video: Detailed instructions for programming additional call buttons to your SYNLETT Caregiver Pager. The video shows how to prepare the pager for pairing and then link new call buttons to it.
Operating Your Pager
Adjusting Volume:
The pager has 3 adjustable volume levels. To change the volume, press the volume button located on the side of the pager until you reach your desired level.
Selecting Alert Tone:
A switch on the pager allows you to select between different alert tones:
- DINGDONG: Provides a loud chime or doorbell-like alert.
- ALARM: Activates a continuous siren when a signal is received from a paired component.
Image: The main pager unit, highlighting the volume control and the switch for selecting between DINGDONG and ALARM alert tones.
Troubleshooting
Pairing Issues:
If you encounter difficulties programming components to the pager, especially if some components pair but others do not, it may indicate that you are not performing the steps quickly enough. The pairing process often requires quick action (e.g., within 3 seconds) after switching the pager mode.
- Start Over: If a component fails to pair, you may need to restart the entire pairing process from the beginning for that specific component.
- New Component Requirement: The first component programmed to the pager MUST be a new component that has not been previously paired. If you attempt to program a component that was already paired, the pager may not initiate the programming sequence.
Specifications
| Feature | Detail |
|---|---|
| Brand | SYNLETT |
| Model | Caregiver Pager |
| Control Method | Touch |
| Mounting Type | Tabletop Mount |
| Power Source | Battery Powered |
| Batteries Required | 2 AA batteries (included) |
| Battery Cell Type | Alkaline |
| Item Weight | 4.6 ounces |
| Package Dimensions | 4.96 x 3.35 x 1.93 inches |
| Color | White |
Warranty Information
This SYNLETT product comes with a 1 Year Manufacturer Warranty. Please retain your proof of purchase for any warranty claims. For detailed terms and conditions, refer to the warranty card included with your original Simple Alert System kit or contact SYNLETT customer support.
Customer Support
If you have any questions, require assistance with setup, or experience any issues not covered in this manual, please refer to the contact information provided in your product packaging or visit the official SYNLETT website for support resources.
