1. Introduction
Thank you for choosing the Furcato Floor to Ceiling Cat Tree. This manual provides essential information for the safe assembly, setup, operation, and maintenance of your new cat tree. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
2. Safety Instructions
- Ensure all parts are securely fastened before allowing cats to use the tree.
- Place the cat tree on a flat, stable surface.
- Regularly check for loose parts or damage. Replace worn components immediately.
- Do not allow children to climb or play on the cat tree.
- This product is designed for indoor use only.
- Use the included anti-tip strap to secure the cat tree to a wall for enhanced stability, especially in households with active or multiple cats.
3. Package Contents
Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Base Plate
- Support Posts (various lengths, some sisal-wrapped)
- Platforms (various sizes, including a padded top platform)
- Hammock
- Dangling Toy Balls
- Adjustable Ceiling Tension Rods
- Hardware Pack (screws, bolts, Allen wrench)
- Anti-Tip Strap and Wall Anchors
- Instruction Manual
4. Assembly Instructions
Follow the step-by-step instructions provided in the included manual. Assembly typically requires an Allen wrench (provided) and may benefit from a second person for stability during ceiling tensioning.
4.1. General Assembly Tips
- Lay out all parts and hardware before starting.
- Do not overtighten screws until all components are in place.
- Refer to the diagrams for correct orientation of parts.
4.2. Adjustable Height Mechanism
The cat tree features an adjustable height design to fit ceilings between 92 and 102 inches (234-258 cm). The top posts include tension rods that extend to create a secure fit against your ceiling without drilling.
Figure 4.2.1: Adjustable Height Mechanism. Turn the knob to extend the top post for a snug fit against the ceiling.
4.3. Securing with Anti-Tip Strap
For maximum stability and safety, especially with multiple or very active cats, it is highly recommended to use the provided anti-tip strap to secure the cat tree to a wall stud.
Figure 4.3.1: Dual Stability Features. The cat tree includes a reinforced base and an anti-tip strap for secure installation.
5. Operating Instructions
Once assembled and securely installed, the Furcato Cat Tree provides multiple levels and features for your cat's enjoyment.
5.1. Exploring the Tiers
The 7-level staircase platforms allow cats to climb and jump effortlessly, satisfying their natural instincts for exploration and exercise. Cats can access various perches, a soft hammock, and a padded platform.
Figure 5.1.1: Cat Tree Climbing Paths. Cats can easily navigate between multiple levels for play and rest.
5.2. Resting Areas
The cat tree offers multiple comfortable resting areas, including a soft hammock and a padded platform, perfect for naps and lounging.
Figure 5.2.1: Multiple Resting Areas. Cats can choose from various comfortable spots to relax.
5.3. Scratching Posts and Toys
The columns of the cat tree are fully wrapped with durable sisal, providing excellent surfaces for your cats to scratch and maintain their claws. Dangling toy balls are also included for interactive play.
Figure 5.3.1: Toy Balls and Scratching Posts. Features designed to engage cats in play and provide an outlet for scratching.
Video 5.3.1: Demonstration of the Furcato Cat Tree with Fully Sisal Scratching Posts, highlighting its features and cat interaction.
Video 5.3.2: Overview of the Floor to Ceiling Cat Tower, showcasing its fully sisal scratching posts and multi-level design.
6. Maintenance
Regular maintenance will extend the life of your cat tree and ensure a safe environment for your pets.
- Cleaning: Use a vacuum cleaner or pet hair tool to remove loose fur and debris from the plush surfaces. Spot clean any soiled areas with a mild detergent and damp cloth. Avoid harsh chemicals.
- Tightening: Periodically check and tighten all screws and bolts to ensure the tree remains stable.
- Sisal Posts: Inspect sisal scratching posts for significant wear. While durable, sisal will fray over time with use.
- Ceiling Tension: Re-check the ceiling tension periodically and adjust as needed to maintain a secure fit.
7. Troubleshooting
If you encounter any issues with your Furcato Cat Tree, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cat tree wobbles or feels unstable | Loose connections; insufficient ceiling tension; uneven floor; anti-tip strap not installed. | Tighten all screws and bolts. Adjust ceiling tension until snug. Ensure the tree is on a level surface. Install the anti-tip strap to a wall stud. |
| Parts do not fit together | Incorrect orientation of parts; wrong hardware used. | Refer to the assembly diagrams and ensure parts are oriented correctly. Verify you are using the correct screws/bolts for each step. |
| Cats not using scratching posts | Preference for other scratching surfaces; unfamiliarity. | Encourage use by rubbing catnip on the sisal posts. Gently guide your cat's paws to the posts. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | US-B893A |
| Dimensions (LxWxH) | 23.6"L x 15.7"W x 92.1"-101.6"H (234-258 cm) |
| Item Weight | 32.56 Pounds |
| Material | Sisal, Plush Fabric |
| Number of Tiers | 7 |
| Color | Beige |
| Target Audience | Cats (All Life Stages, All Breed Sizes) |
| Specific Uses | Indoor |
Figure 8.1.1: Product Dimensions and Features Overview.
9. Warranty
This product comes with a 30-day warranty from the date of purchase. Please retain your proof of purchase for any warranty claims. The warranty covers manufacturing defects but does not cover damage due to misuse, improper assembly, or normal wear and tear.
10. Support
For further assistance, missing parts, or troubleshooting not covered in this manual, please contact Furcato customer support through the retailer's platform where the product was purchased.