ApeStellar Keyless Entry Door Lock DK01 User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ApeStellar Keyless Entry Door Lock, Model DK01. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety Information

• Do not attempt to disassemble or repair the lock yourself. Contact customer support for assistance.
• Keep backup keys in a secure location outside the property.
• Avoid exposing the lock to excessive moisture or direct water spray, despite its IP54 rating, to prolong its lifespan.
• Ensure batteries are inserted with correct polarity. Replace all batteries simultaneously with new ones.

3. Package Contents

Verify that all components are present before beginning installation:

• ApeStellar Keyless Entry Door Lock (Exterior and Interior Assemblies)
• 2 Backup Keys
• Latch
• Screws
• Strike Plate
• Mounting Plate
• Installation Instructions (this manual)
• Programming Instructions (included in this manual)

Figure 3.1: Included Components

4. Specifications

Figure 4.1: Door Compatibility and Dimensions

Figure 4.2: Multi-Function Features Overview

5. Setup & Installation

The ApeStellar Keyless Entry Door Lock is designed for easy installation, typically taking about 15 minutes with a screwdriver. Ensure your door meets the specifications listed in Section 4.

5.1 Pre-Installation Check

• Verify door hole diameter is 2-1/8" (54mm).
• Confirm door thickness is between 1-3/8" to 1-3/4" (35-45mm).
• Check backset measurement (distance from door edge to center of bore hole) is either 2-3/8" or 2-3/4".
• If an existing deadbolt overlaps with the keypad door knob, move the deadbolt to the bottom hole and install the keypad door knob on top.

Figure 5.1: Door Compatibility Examples

5.2 Installation Steps

1. Prepare the Door: Ensure the door is properly drilled according to the specifications.
2. Install the Latch: Insert the latch into the door edge and secure it with screws. Adjust the backset if necessary.
3. Install Exterior Assembly: Feed the cable from the exterior keypad assembly through the door hole. Ensure the spindle is correctly oriented.
4. Install Interior Mounting Plate: Secure the interior mounting plate to the door using screws, ensuring the cable passes through the plate.
5. Connect Cables & Install Interior Assembly: Connect the cable from the exterior assembly to the interior assembly. Carefully align the interior assembly with the mounting plate and secure it with screws. Ensure the knob operates smoothly.
6. Install Batteries: Open the battery cover on the interior assembly and insert 4 AAA batteries (not included), observing polarity.
7. Test Operation: After installation, test the mechanical key and the default code (if any) to ensure the lock functions correctly.

Figure 5.2: Installation in Progress

5.3 Automatic Handing Identification

The lock automatically identifies the door handing (left or right) during installation. Ensure the interior knob is correctly oriented for your door type.

Figure 5.3: Automatic Handing Identification

6. Operating Instructions

Your ApeStellar Keyless Entry Door Lock offers multiple convenient features for secure access.

6.1 Programming User Codes

The lock supports up to 50 unique user codes. Refer to the specific programming instructions included with your lock for detailed steps on adding, deleting, and modifying user codes. This process typically involves entering a master code followed by a sequence of commands and the desired user code.

Figure 6.1: Up to 50 User Codes

6.2 One-Time Passcodes

Generate temporary one-time passcodes for guests or service personnel. These codes expire after a single use, providing enhanced security.

Figure 6.2: One-Time User Code Usage

6.3 Auto-Lock Function

The auto-lock feature automatically locks the door after a set period (5-900 seconds) once it has been unlocked. This provides peace of mind, ensuring your door is always secured.

6.4 One-Touch Locking

Pressing the dedicated lock button on the keypad will instantly lock the door, offering quick and convenient security.

Figure 6.3: Auto-Lock and One-Touch Locking

6.5 Anti-Peep Code Protection

To prevent others from guessing your code, you can enter random digits before or after your actual passcode. The lock will still recognize the correct sequence within the longer entry.

Figure 6.4: Anti-Peep Code Protection

6.6 Vacation Mode

Activate vacation mode when you are away for an extended period. This mode disables all user codes, requiring a mechanical key for entry, enhancing security.

6.7 Mute Mode

Enable mute mode to silence keypad beeps and operational sounds, ideal for quiet environments or late-night entries.

7. Maintenance

7.1 Battery Replacement

The lock is powered by 4 AAA batteries. When the battery level is low, the lock will provide a warning (e.g., a specific light indicator or sound). Replace all four batteries simultaneously with new, high-quality alkaline batteries to ensure optimal performance and prevent leakage.

Figure 7.1: Low Battery Alert

7.2 Cleaning

Clean the keypad and lock body with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and electronic components.

8. Troubleshooting

If you encounter issues with your ApeStellar Keyless Entry Door Lock, refer to the following common problems and solutions:

• Lock not responding to keypad: Check battery level and replace if necessary. Ensure the keypad is clean and free of debris.
• Code not working: Verify the correct code is being entered. Ensure the lock is not in vacation mode. Try reprogramming the code.
• Door not locking/unlocking: Check for any obstructions in the door frame or latch. Ensure the lock is properly aligned and installed.
• Keypad lights not illuminating: Replace batteries. If the issue persists, contact customer support.
• Lock beeps continuously: This may indicate a low battery warning or an error. Replace batteries first. If the issue continues, refer to the programming guide for error codes or contact support.

Important: Always keep your backup keys accessible in case of electronic malfunction or battery depletion.

9. Warranty & Support

Information regarding the specific warranty period and detailed support contact information for the ApeStellar Keyless Entry Door Lock Model DK01 was not available in the provided product data. For warranty claims or technical assistance, please refer to the product packaging or contact ApeStellar customer service directly through their official website or the retailer where the product was purchased.