Introduction
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT Z8 Luxe Oval Leg Gaming Standing Desk, Model E8. This electric adjustable height desk is designed to enhance your gaming and work experience with its robust features and ergonomic design.
Safety Information
Please read all safety instructions before assembly and operation to prevent injury or damage to the product. Keep this manual for future reference.
- Ensure all components are securely fastened before use.
- The desk has a maximum weight capacity of 352 pounds (160 kg). Do not exceed this limit.
- Assembly is recommended for two people due to the size and weight of components.
- Keep children and pets away from the desk during height adjustments. The anti-collision feature helps prevent accidents, but direct supervision is advised.
- Do not place liquids directly on the control panel or near electrical components.
- Only use the provided power adapter and cables.
Setup and Assembly
Assembly of the FLEXISPOT Z8 Luxe Standing Desk requires two individuals. Follow these general steps for installation. Refer to the detailed assembly guide included in your product packaging for specific diagrams and hardware identification.
- Unpack Components: Carefully remove all parts from the packaging and verify against the parts list in your assembly guide.
- Assemble Desk Frame: Attach the oval legs to the crossbar and motor housing. Ensure all screws are tightened securely.
- Attach Tabletop: Position the desk frame onto the underside of the tabletop. Align pre-drilled holes and secure the frame to the tabletop using the provided screws.
- Install Control Panel: Mount the LED control panel to the underside of the desk, typically on the front edge, using the designated screws.
- Connect Cables: Connect the motor cables, control panel cable, and power adapter cable to the control box according to the assembly guide. Ensure all connections are firm.
- Cable Management: Use the included cable ties or management clips to organize cables neatly under the desk.
- Power On: Plug the power adapter into a wall outlet.
Operating Instructions
Your FLEXISPOT Z8 desk features an intuitive LED control panel for easy height adjustments and memory settings.
Control Panel Functions
- Up/Down Buttons (▲ / ▼): Press and hold to adjust the desk height upwards or downwards. Release the button to stop at the desired height.
- Memory Settings (1, 2, 3, 4): The desk allows you to save up to four preferred height positions.
- Set Memory Position: Adjust the desk to your desired height using the Up/Down buttons. Press the 'M' button, then immediately press one of the number buttons (1, 2, 3, or 4) to save the current height to that preset.
- Recall Memory Position: Press the corresponding number button (1, 2, 3, or 4) to automatically move the desk to the saved height.
- USB Port: A convenient USB port is integrated into the control panel for charging small electronic devices.
Height Adjustment
The desk features a continuous height adjustment range from 23.6 inches to 48.8 inches, accommodating various user heights and preferences. The dual motor system ensures smooth and quiet operation, with noise levels below 45dB.
Anti-Collision Feature
The desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage to objects or injury to users.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your standing desk.
- Cleaning: Wipe the desk surface and legs with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Cable Inspection: Periodically check all cables for any signs of wear, fraying, or damage. Ensure they are securely connected.
- Fastener Check: Occasionally check all screws and bolts to ensure they remain tight. Retighten if necessary.
Troubleshooting
If you encounter issues with your desk, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move | Power cable disconnected; Overload; System error | Check power connections; Reduce weight on desk; Perform a reset (see below) |
| Uneven height adjustment | Unbalanced load; System calibration issue | Distribute weight evenly; Perform a reset (see below) |
| Error code displayed | Specific system malfunction | Refer to the detailed error code list in your full manual or contact customer support. |
Reset Procedure
If the desk is not functioning correctly, a system reset may resolve the issue:
- Press and hold the 'M' button (or the 'Down' button on some models) for approximately 5-10 seconds until the desk moves to its lowest position and slightly rebounds.
- Release the button. The desk is now reset and ready for normal operation.
Specifications
Key technical specifications for the FLEXISPOT Z8 Luxe Oval Leg Gaming Standing Desk (Model E8).
| Feature | Detail |
|---|---|
| Brand | FLEXISPOT |
| Model Number | FLEXISPOT E8 |
| Product Dimensions | 60"D x 27.5"W x 23.6"H |
| Tabletop Size | 60"x27" |
| Maximum Weight Capacity | 352 Pounds (160 kg) |
| Lifting Mechanism | Electric Dual Motors |
| Height Adjustment Range | 23.6" - 48.8" |
| Noise Level | Less than 45dB |
| Base Material | Metal |
| Top Material Type | Wood |
| Special Features | Corded, USB Port, Anti-collision System, Programmable Memory Settings |
| Assembly Required | Yes (2 people recommended) |
Warranty and Support
FLEXISPOT provides a comprehensive warranty for your peace of mind.
- Desk Frame and Motor: 15-year coverage.
- Control Panel and Electronics: 2-year protection.
For warranty claims, technical assistance, or any questions not covered in this manual, please contact FLEXISPOT customer support. Refer to the contact information provided with your purchase or visit the official FLEXISPOT website for support details.
