WINNY POOL CLEANER 200 SE Charger Accessories User Manual

Introduction

This user manual provides essential information for the safe and effective use of your WINNY POOL CLEANER 200 SE Charger Accessories. Please read this manual thoroughly before operating the charger and retain it for future reference. This charger is designed specifically for compatible WINNY robotic pool cleaners, ensuring optimal charging performance.

Safety Information

• Use only with compatible WINNY POOL CLEANER models as specified.
• Do not expose the charger or cables to water or excessive moisture. This product is for indoor use only.
• Ensure the power outlet voltage matches the charger's specifications.
• Do not attempt to disassemble, modify, or repair the charger. Refer all servicing to qualified personnel.
• Keep the charger and cables away from heat sources, sharp objects, and areas where they could be tripped over.
• Unplug the charger from the power outlet when not in use or before cleaning.
• If the charger or cable appears damaged, discontinue use immediately and replace it with an official WINNY POOL CLEANER accessory.

Package Contents

Please verify that all items are present in your package:

• 1 x WINNY POOL CLEANER 200 SE Charger (Wall Adapter)
• 2 x USB Cable (with 2-Pin Connector)
• 1 x User Manual (this document)

Image: The WINNY POOL CLEANER 200 SE Charger Accessories, including the wall adapter and the USB cable with its distinct 2-pin connector, designed for charging compatible WINNY robotic pool cleaners.

Setup Instructions

1. Prepare the Charger: Unpack the WINNY POOL CLEANER 200 SE Charger and one of the provided USB cables.
2. Connect USB Cable to Adapter: Insert the standard USB-A end of the charging cable into the USB port on the WINNY POOL CLEANER wall adapter. Ensure it is firmly seated.
3. Connect to Pool Cleaner: Locate the charging port on your WINNY robotic pool cleaner. Carefully align the 2-pin connector end of the USB cable with the charging port on the pool cleaner and insert it. The connector is designed to fit in only one orientation. Do not force it.
4. Plug into Power Outlet: Plug the WINNY POOL CLEANER wall adapter into a standard electrical wall outlet (AC 100-240V, 50/60Hz).
5. Verify Connection: Once connected, your pool cleaner should indicate that it is charging, typically via an LED indicator on the cleaner itself. Refer to your pool cleaner's manual for specific charging indicators.

Operating Instructions

The WINNY POOL CLEANER 200 SE Charger is designed for simple operation:

• Charging Cycle: Once connected as per the setup instructions, the charger will automatically begin charging your WINNY robotic pool cleaner. The charging time will vary depending on the battery level of your pool cleaner.
• Charging Indicators: Monitor the charging status directly on your WINNY robotic pool cleaner. The charger itself does not have indicator lights.
• Full Charge: Disconnect the charger once your pool cleaner's battery is fully charged to prolong battery life. Refer to your pool cleaner's manual for full charge indications.
• Storage: When not in use, unplug the charger from the wall outlet and store it in a dry, cool place.

Maintenance

Proper maintenance ensures the longevity and performance of your charger:

• Cleaning: Disconnect the charger from the power outlet and the pool cleaner before cleaning. Wipe the charger and cables with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Cable Care: Avoid bending or kinking the USB cables excessively, especially near the connectors. This can damage the internal wires.
• Storage: Store the charger and cables in a clean, dry environment, away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the charger and cables for any signs of damage, such as frayed wires, cracked casing, or bent pins. If damage is found, replace the accessory immediately.

Troubleshooting

If you encounter issues with your WINNY POOL CLEANER 200 SE Charger, refer to the following table:

If the problem persists after attempting these solutions, please contact WINNY POOL CLEANER customer support.

Specifications

• Model: WINNY HJ1102 Charger
• Input: AC 100-240V, 50/60Hz
• Output: USB (Specific voltage/amperage for 2-pin cable is determined by the pool cleaner's requirements, typically 29.4V for WINNY models)
• Connector Type: 2-Pin (Proprietary for WINNY Pool Cleaners)
• Included Components: 1 x Wall Adapter, 2 x USB Cables)
• Dimensions: Approximately 3 x 1 x 4 inches (Charger Adapter)
• Weight: Approximately 3.2 ounces
• Color: Black
• Connectivity Technology: USB
• Compatible Devices: Specific WINNY Robotic Pool Cleaners (e.g., WINNY POOL CLEANER 200 SE)

Warranty and Support

WINNY POOL CLEANER products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or to purchase replacement parts, please visit the official WINNY POOL CLEANER website or contact their customer service department.

Online Support: Visit the WINNY POOL CLEANER Store on Amazon

Please have your product model number (WINNY HJ1102 Charger) and purchase information ready when contacting support.