1. Introduction
Thank you for choosing the Husky 1000 Lumen LED Utility Light. This manual provides essential information for the safe and efficient use of your new utility light. Please read these instructions carefully before operation and retain them for future reference.
The Husky 1000 Lumen LED Utility Light (Model 1004 377 812) is designed to provide bright, long-lasting illumination for various tasks. Its features include a powerful LED bulb, 180-degree vertical rotation, and a durable construction.
2. Safety Information
WARNING: To prevent damage to eyesight, never look directly into the light when it is on. Do not shine the light into the face of someone else.
- Always keep the utility light out of reach of children.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Ensure batteries are inserted with correct polarity (+ and -).
- Remove batteries if the light will not be used for an extended period to prevent leakage.
- This product is not water resistant. Avoid exposure to water or high humidity.
- Do not attempt to disassemble or modify the light. There are no user-serviceable parts inside.
3. Package Contents
Verify that all items are present in the package:
- Husky 1000 Lumen LED Utility Light (Model 1004 377 812)
- 6 x AA Batteries
4. Setup
4.1 Battery Installation
- Locate the battery compartment cover on the back of the utility light.
- Open the battery compartment cover. This may involve sliding a latch or unscrewing a small screw.
- Insert 6 AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover securely.
Figure 1: Back of the Husky 1000 Lumen LED Utility Light packaging. This view provides information on battery requirements and safety warnings, indicating the general area for battery access.
5. Operation
5.1 Powering On/Off and Mode Selection
The utility light features a touch-sensitive power button, typically located on the front or top of the unit.
- To Turn On (High Mode): Press the power button once. The light will illuminate at its maximum brightness of 1000 lumens.
- To Switch to Low Mode: While the light is on High mode, press the power button a second time. The brightness will reduce to 200 lumens.
- To Turn Off: While the light is on Low mode, press the power button a third time. The light will turn off.
5.2 Adjusting the Light Angle
The utility light is equipped with a 180-degree pivoting handle. This handle allows you to adjust the light's angle for optimal illumination and can also serve as a stable stand on various surfaces.
- Grasp the handle firmly and gently pivot it to the desired angle.
- The handle can be positioned to direct light upwards, downwards, or to stand the unit upright.
Figure 2: Front of the Husky 1000 Lumen LED Utility Light packaging. This image illustrates the light's design, lumen output, and the pivoting handle feature.
6. Maintenance
6.1 Cleaning
To clean the utility light, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components. Ensure the light is off and batteries are removed before cleaning.
6.2 Battery Replacement
When the light begins to dim or fails to turn on, it is time to replace the batteries. Follow the battery installation steps in Section 4.1. Always replace all 6 AA batteries at the same time with new, fresh batteries of the same type.
6.3 Storage
Store the utility light in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent potential leakage and damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Batteries are dead or incorrectly installed. | Replace all 6 AA batteries with new ones, ensuring correct polarity. |
| Light is dim. | Batteries are low. | Replace all 6 AA batteries with new ones. |
| Light flickers. | Loose battery connection or low batteries. | Check battery compartment for secure fit; replace batteries if necessary. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 1004 377 812 |
| Light Source | LED |
| Brightness (High) | 1000 Lumens |
| Brightness (Low) | 200 Lumens |
| Run Time (High) | 3.5 hours |
| Run Time (Low) | 20 hours |
| Beam Distance (High) | 35 meters |
| Beam Distance (Low) | 20 meters |
| Power Source | 6 x AA Batteries (included) |
| Control Method | Touch |
| Pivoting Handle | 180 degrees |
| Dimensions | 6.77 x 4.65 x 1.77 inches |
| Weight | 1.36 Pounds |
| Material | Plastic |
| Water Resistance | Not Water Resistant |
9. Warranty and Support
9.1 Lifetime Warranty
The Husky 1000 Lumen LED Utility Light is backed by a Lifetime Warranty. If your Husky product ever fails, bring it back to your nearest Home Depot store with proof of purchase for a replacement.
9.2 Customer Support
For further assistance or inquiries, please contact Husky customer support:
- Phone: 1-888-HD-HUSKY
- Web: www.huskytools.com
