1. Introduction
This manual provides detailed instructions for the safe and efficient use of your ODK LED Desk Light Strip. Please read this manual thoroughly before installation and operation, and retain it for future reference.
2. Safety Information
- Ensure the power source is DC and matches the product's requirements.
- This product is designed for indoor use only. Do not expose to water or high humidity.
- Do not attempt to disassemble or modify the light strip. This may void the warranty and pose a safety risk.
- Keep out of reach of children.
- Avoid direct eye exposure to the LED light for extended periods.
- If any damage is observed, discontinue use immediately and contact customer support.
3. Package Contents
Verify that all items are present in your package:
- 1 x ODK LED Desk Light Strip (Model: C02013501004USANQWERTY)
- 1 x USB Cable with Integrated Controller
Image 1: ODK LED Desk Light Strip with its USB cable and inline controller. The light strip is a long, white bar, connected to a white cable that leads to a rectangular inline controller with four buttons, and then to a standard USB-A connector.
4. Setup and Installation
- Choose Location: Select a suitable indoor location for your light strip, such as a desk or shelf. The light strip is designed for tabletop mounting.
- Position the Light Strip: Place the light strip in the desired position. Ensure the cable can reach a USB power source without strain.
- Connect to Power: Insert the USB-A connector of the light strip's cable into a compatible USB power source (e.g., computer USB port, USB wall adapter, power bank). The power source must provide DC power.
- Initial Power On: Once connected, the light strip should power on or be ready for activation via the inline controller.
5. Operating Instructions
The ODK LED Desk Light Strip is controlled via the inline push-button controller. Refer to Image 2 for button identification.
Image 2: Close-up view of the inline controller for the ODK LED Desk Light Strip. The controller is white and rectangular, featuring four distinct buttons: a power/mode button (S/B), an 'M' button for mode selection, a 'C' button for color selection, and a button with a light bulb icon for brightness/speed adjustment.
- Power On/Off (S/B Button - first button from left): Press this button to turn the light strip on or off. This button may also cycle through different lighting effects or speeds depending on the mode.
- Mode Selection (M Button): Press the 'M' button to cycle through various lighting modes (e.g., static colors, dynamic effects).
- Color Selection (C Button): Press the 'C' button to change the static color of the light strip when in a static color mode. The light strip supports multicolor output.
- Brightness/Speed Adjustment (Light Bulb Icon Button): Use this button to adjust the brightness of static colors or the speed of dynamic lighting effects.
6. Maintenance
- Cleaning: Gently wipe the light strip and controller with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, disconnect the light strip from the power source and store it in a cool, dry place.
- Cable Care: Avoid bending or twisting the USB cable excessively to prevent internal damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light strip does not turn on. | No power, loose connection, faulty USB port. | Ensure USB cable is securely connected. Try a different USB port or power adapter. |
| Lights are dim or flickering. | Insufficient power, brightness setting too low. | Use a USB power source with adequate output. Adjust brightness using the controller. |
| Colors are not changing. | Incorrect mode selected. | Press the 'M' button to cycle through modes, then use the 'C' button to change colors. |
8. Specifications
- Model Number: C02013501004USANQWERTY (Part DD-015 RGB1-125-80)
- Brand: ODK
- Light Source Type: LED
- Light Color: Multicolor
- Power Source: DC (USB)
- Special Feature: Corded
- Switch Type: Push Button
- Cable Length: Approximately 39.37 inches (1 meter)
- Indoor/Outdoor Usage: Indoor only
- Material: Metal (Base Material)
- Item Weight: 12.8 ounces
- Package Dimensions: 32.8 x 1.5 x 1.5 inches
9. Warranty and Support
For warranty information or technical support, please contact ODK customer service through the retailer where the product was purchased or visit the official ODK website. Please have your model number (C02013501004USANQWERTY) and purchase details ready.
