QWORK Cow Hip Lift Instruction Manual

Introduction

The QWORK Cow Hip Lift is a heavy-duty cattle lifter designed to assist cows suffering from various conditions such as dystocia, injury, postpartum paralysis, or fever. Constructed from high-strength galvanized steel and featuring thickened soft rubber components, this tool ensures both durability and the comfort of your livestock. It provides a safe and effective method for supporting and lifting cattle with a robust maximum load capacity of 2204 pounds (1000 kilograms).

This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your QWORK Cow Hip Lift. Please read all instructions carefully before use to ensure safe and effective operation.

Safety Information

Always prioritize the safety of both the animal and the operator. Failure to follow safety guidelines can result in serious injury or harm.

• Ensure the cow hip lift is in good working condition before each use. Inspect for any damage, wear, or loose components.
• Always use appropriate lifting equipment (e.g., hoist, tractor with front-end loader) that can safely handle the weight of the animal and the hip lift.
• Never exceed the maximum load capacity of 2204 pounds (1000 kilograms).
• Maintain a clear working area around the animal and lifting equipment.
• Ensure the animal is calm and properly restrained before attempting to attach the hip lift.
• Lift the animal slowly and smoothly, observing its reaction.
• The recommended safe usage time for supporting the animal is up to 120 minutes. Prolonged suspension can cause discomfort or injury.
• Always have assistance when operating the hip lift, especially with larger or distressed animals.

Product Components

Familiarize yourself with the main components of the QWORK Cow Hip Lift.

Figure 1: Overview of the QWORK Cow Hip Lift components, showing the main triangular frame, the adjustable threaded bar with green rubber tubes, and the crank handle.

Figure 2: Detail of the thick hook design, ensuring secure attachment to lifting equipment and stability.

• Main Frame: Triangular support structure with a top hook for attachment to lifting equipment.
• Adjustable Bar: Threaded rod with a crank handle for adjusting the width of the hip lift.
• Soft Rubber Tubes: Thickened green rubber tubes that provide cushioning and grip on the cow's hips.
• Sponge Mat: Located on the crossbar for additional protection and comfort.
• Thick Hook Design: Ensures secure grip on the animal's hips.

Setup

The QWORK Cow Hip Lift comes pre-assembled for ease of use. No complex assembly is required. Ensure all components are securely fastened before first use.

1. Inspect the Unit: Before initial use, and prior to each subsequent use, thoroughly inspect the entire hip lift for any signs of damage, cracks, bends, or excessive wear on the steel frame, rubber tubes, or threaded rod. Ensure the crank handle is securely attached.
2. Verify Adjustability: Test the adjustment mechanism by rotating the crank handle to ensure the width of the hip lift can be smoothly adjusted. The pitch range is from 0 to 35.83 inches (0 to 91 cm).
3. Prepare Lifting Equipment: Connect the top hook of the hip lift to your chosen lifting device (e.g., chain hoist, tractor with front-end loader). Ensure the lifting device has a capacity greater than the animal's weight and the hip lift's maximum capacity.

Figure 3: The QWORK Cow Hip Lift ready for use, showing its robust construction and the top attachment point, with an inset illustrating a cow being lifted.

Operating Instructions

Follow these steps for safe and effective operation of the QWORK Cow Hip Lift.

1. Position the Animal: Ensure the cow is in a stable position, preferably lying on its side, or in a chute if standing.
2. Adjust Width: Rotate the crank handle to adjust the width of the hip lift to comfortably fit over the cow's hip bones. The adjustable opening can extend up to 35.83 inches (91 cm).


Figure 4: Adjusting the width of the hip lift using the crank handle. The arrows indicate the direction of adjustment.

3. Attach to Hips: Carefully position the soft rubber tubes over the cow's hip bones. Ensure the tubes are seated securely and evenly on both sides. The thick hook design and uneven texture of the rubber tubes provide anti-slip protection.


Figure 5: The hip lift properly positioned on a cow, showing the adjustable opening and secure fit.

4. Tighten Securely: Once positioned, rotate the crank handle to gently tighten the hip lift until it firmly grips the cow's hip bones. Do not overtighten, as this can cause discomfort or injury. The triangular support structure provides enhanced stability.
5. Initiate Lift: Slowly and gradually lift the animal using your chosen lifting equipment. Observe the animal's reaction throughout the lifting process.


Figure 6: The QWORK Cow Hip Lift in action, supporting a cow. Ensure the lifting is slow and controlled.

6. Monitor Animal: Continuously monitor the animal for signs of distress or discomfort. The recommended safe usage time is up to 120 minutes.
7. Lowering: To lower the animal, slowly and gradually release the tension on the lifting equipment. Once the animal is stable on its feet or in the desired position, loosen the hip lift by rotating the crank handle and carefully remove it.

Maintenance

Proper maintenance will extend the life of your QWORK Cow Hip Lift and ensure its continued safe operation.

• Cleaning: After each use, clean the hip lift thoroughly, especially the rubber tubes and any parts that came into contact with the animal. Use a mild disinfectant solution and rinse with water. Dry completely before storage.
• Lubrication: Periodically apply a light lubricant to the threaded rod and crank mechanism to ensure smooth adjustment.
• Inspection: Regularly inspect all components for wear, corrosion, or damage. Pay close attention to the integrity of the steel frame, the condition of the rubber tubes, and the functionality of the adjustment mechanism.
• Storage: Store the hip lift in a clean, dry place, away from direct sunlight and extreme temperatures, to prevent material degradation.

Troubleshooting

This section addresses common issues you might encounter.

Specifications

• Model Number: QS15429
• Material: High-strength galvanized steel, thickened soft rubber
• Maximum Load Capacity: 2204 pounds (1000 kilograms)
• Adjustable Pitch Range: 0 to 35.83 inches (0 to 91 cm)
• Item Weight: 15.67 pounds
• Package Dimensions: 26 x 13 x 9 inches
• Country of Origin: China
• Recommended Safe Usage Time: Up to 120 minutes

Figure 7: Visual representation of the 2204 lbs load capacity and detailed views of key components like the handle grip, rubber tube, and adjustment screw.

Figure 8: Detailed dimensions of the QWORK Cow Hip Lift, including width, height, and overall length for reference.

Warranty and Support

Specific warranty information for the QWORK Cow Hip Lift is not provided in this manual. For warranty details, product support, or to inquire about replacement parts, please contact QWORK customer service directly or refer to the product packaging and purchase documentation.

Manufacturer: QWORK