Lexon LH95B-LP

Lexon Steli Bell LED Table Lamp User Manual

Model: LH95B-LP | Brand: Lexon

Introduction

Thank you for choosing the Lexon Steli Bell LED Table Lamp. This portable and versatile lamp is designed to illuminate your indoor and outdoor spaces with its elegant, minimalist design and advanced features. Please read this manual carefully before using the product to ensure proper operation and longevity.

Lexon Steli Bell LED Table Lamp in pink, with a hand touching its top to illustrate touch control.

The Lexon Steli Bell LED Table Lamp features intuitive touch control for easy operation.

Package Contents

  • Lexon Steli Bell LED Table Lamp (LH95B-LP)
  • USB-C Charging Cable
  • User Manual

Setup

1. Initial Charging

Before first use, fully charge your Steli Bell lamp. Locate the USB-C charging port, typically at the base of the lamp. Connect the provided USB-C cable to the lamp and the other end to a compatible USB power adapter (not included).

  • A charging indicator light (if present) will show the charging status.
  • Charging time may vary, but typically takes a few hours for a full charge.
  • The lamp offers up to 24 hours of illumination on a full charge, depending on brightness and color settings.

2. Placement

The Steli Bell lamp is suitable for both indoor and outdoor use (IPX4 splash-resistant). Place it on a stable, flat surface. Ensure it is not exposed to extreme temperatures or direct water immersion.

Lexon Steli Bell LED Table Lamp in pink placed on an outdoor table, demonstrating its suitability for outdoor use.

The Steli Bell lamp is designed for both indoor and outdoor environments.

Operating Instructions

1. Power On/Off

To turn the lamp on or off, gently tap the touch-sensitive area located at the top of the lamp's shade.

2. Adjusting Brightness (Dimmer)

While the lamp is on, press and hold the touch-sensitive area to cycle through brightness levels. Release your finger when the desired brightness is achieved. The lamp offers 120 lumens of illumination at its brightest setting.

Lexon Steli Bell LED Table Lamp in blue, highlighting its minimalist design and 120 lumens brightness.

The lamp provides 120 lumens of light and features a sleek, minimalist design.

3. Changing Colors

The Steli Bell lamp features 9 adjustable lighting colors. To change the color, quickly tap the touch-sensitive area multiple times until your desired color appears. The lamp will cycle through the available colors with each tap.

Lexon Steli Bell LED Table Lamp in green, with a hand touching the top, illustrating the 9 adjustable colors and brightness.

Customize your lighting with 9 different colors and adjustable brightness.

4. Multiple Lamp Synchronization

For enhanced ambiance, multiple Steli Bell lamps can be synchronized. Place the lamps within close proximity. When you adjust the color or brightness on one lamp, the others will automatically follow, creating a unified lighting experience.

Three Lexon Steli Bell lamps in pink, blue, and green, synchronized to create a cohesive ambiance on a dining table.

Synchronize multiple Steli lamps to create a unique and cohesive lighting ambiance.

Maintenance and Care

  • Cleaning: Wipe the lamp with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, but ensure no water enters the charging port or internal components. Do not use abrasive cleaners or solvents.
  • Storage: When not in use for extended periods, store the lamp in a cool, dry place. Ensure it is fully charged before storing to preserve battery life.
  • Battery Care: To maximize battery lifespan, avoid completely draining the battery frequently. Recharge the lamp when the light output becomes noticeably dim.
  • Outdoor Use: While suitable for outdoor use (IPX4), avoid leaving the lamp exposed to heavy rain or prolonged direct sunlight. Bring it indoors during severe weather conditions.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.Battery is depleted.Connect the lamp to a power source using the USB-C cable and charge it fully.
Lamp does not respond to touch.Touch sensor is dirty or obstructed.Clean the top touch area with a soft, dry cloth. Ensure your finger is making proper contact.
Brightness or color adjustment is erratic.Low battery or interference.Recharge the lamp. Ensure no strong electromagnetic interference nearby.
Lamps do not synchronize.Lamps are too far apart or not in synchronization mode.Ensure lamps are within close proximity. Try turning them off and on again.

Specifications

FeatureDetail
ModelLH95B-LP
BrandLexon
Light SourceIntegrated LED
BrightnessUp to 120 Lumens
Color Options9 adjustable colors
Battery LifeUp to 24 hours (depending on settings)
Charging PortUSB-C
RechargeabilityWirelessly rechargeable
MaterialAluminum finishing, Metal shade
Finish TypePainted
Product Weight135 Grams
Water ResistanceIPX4 (Splash-resistant, suitable for outdoor use)
Infographic detailing features of the Lexon Steli Bell lamp: multiple lamp synchronization, 9 adjustable colors & dimmer, USB-C charging, 24 hours illumination, IPX4 outdoor use, wirelessly rechargeable, aluminum finishing.

Key features and specifications of the Steli Bell lamp.

Safety Information

  • Do not disassemble, repair, or modify the product. This will void the warranty.
  • Keep away from extreme heat sources, direct flame, and highly humid environments.
  • Do not immerse the lamp in water. While splash-resistant, it is not waterproof.
  • Use only the provided USB-C cable or a certified equivalent for charging.
  • Keep out of reach of children and pets.
  • If the lamp is damaged or malfunctions, discontinue use immediately and contact customer support.

Warranty and Support

Lexon products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or service inquiries, please visit the official Lexon website or contact your local distributor.

Official Website: www.lexon-design.com

© 2024 Lexon. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.