Iceman RJ59-CT
Contents
Iceman Countertop Water Dispenser User Manual
Model: RJ59-CT
1. Product Overview
The Iceman Countertop Water Dispenser provides convenient access to both hot and cold water from a single compact unit. Designed for use with standard 3 or 5-gallon water bottles, this top-loading dispenser is ideal for kitchens, offices, or any space where instant hot or cold water is desired. It features separate spouts for hot and cold water, indicator lights, and an integrated safety lock for the hot water spout.
Key Features:
- Countertop Design: Saves space and provides easy access to water.
- Hot and Cold Water: Delivers water heated above 190°F and chilled below 60°F.
- Top-Loading Compatibility: Accommodates both 3-gallon and 5-gallon water jugs.
- Indicator Lights: LED lights show when water is heating or chilling, turning off when ready to serve.
- Child Safety Lock: Prevents accidental dispensing of hot water.
- Energy-Saving Technology: Efficient operation with low noise.
- Compact Size: Fits easily on most countertops.

Front view of the Iceman Countertop Water Dispenser, showing the hot and cold spouts and indicator lights.
2. Important Safety Information
Please read all instructions carefully before using the water dispenser to ensure safe operation and prevent injury or damage. Keep this manual for future reference.
General Safety:
- This appliance is for household and light office use only. Do not use outdoors.
- Ensure the dispenser is placed on a firm, level surface, away from direct sunlight and heat sources.
- Do not operate the dispenser if the power cord or plug is damaged.
- Always plug the dispenser into a grounded electrical outlet.
- Keep the dispenser away from children and pets, especially when dispensing hot water.
- Do not immerse the dispenser, cord, or plug in water or other liquids.
- Unplug the dispenser before cleaning or performing any maintenance.
Hot Water Safety:
- The hot water dispensed can reach temperatures above 190°F (88°C) and can cause severe burns.
- Always engage the child safety lock on the hot water spout when not in use, especially in households with children.
- Exercise extreme caution when dispensing hot water.
Electrical Safety:
- The unit operates on 110V. Cold water: 65W, Hot water: 450W.
- This product is cETL approved, ensuring it meets safety standards.
3. Setup and Installation
Follow these steps for initial setup of your Iceman Water Dispenser:
- Unpack the Dispenser: Carefully remove all packaging materials and inspect the dispenser for any damage.
- Placement: Place the dispenser on a sturdy, level surface that can support its weight when a full water bottle is installed. Ensure there is adequate ventilation around the unit (at least 4 inches from walls). Do not place it near direct sunlight or heat-generating appliances.
- Initial Cleaning (Flushing):
- Place an empty bucket or large container under the spouts.
- Load a full 3 or 5-gallon water bottle onto the top-loading receptacle.
- Open both the hot and cold water spouts and allow approximately 1-2 liters of water to flow through each, discarding this water. This helps to flush out any manufacturing residue and air from the lines.
- Close the spouts.
- Connect Power: Plug the power cord into a grounded 110V electrical outlet.
- Activate Heating/Cooling: Locate the power switches on the back of the unit (usually one for hot and one for cold). Turn them to the 'ON' position. The indicator lights on the front will illuminate.

The dispenser is compatible with both 3-gallon and 5-gallon water bottles.

The compact design allows the dispenser to fit easily on most countertops.
4. Operating Instructions
Your Iceman Water Dispenser is designed for simple and intuitive operation.
Indicator Lights:
- Red Light (Hot): Illuminates when the hot water tank is heating. It will turn off when the water reaches the optimal hot temperature.
- Green Light (Cold): Illuminates when the cold water tank is chilling. It will turn off when the water reaches the optimal cold temperature.

LED indicator lights show the heating and cooling status.
Dispensing Water:
- Cold Water: Place your cup under the blue-marked spout. Push the lever to dispense cold water. Release the lever to stop the flow.
- Hot Water: Place your cup under the red-marked spout. To dispense hot water, first push the safety lock button (usually located on top of the lever), then push the lever. Release both to stop the flow. Always ensure the safety lock re-engages after use.

Separate spouts for hot and cold water for convenience.

The hot water spout features a child safety lock for added protection.
5. Maintenance and Cleaning
Regular cleaning ensures optimal performance and hygiene of your water dispenser.
Exterior Cleaning:
- Unplug the dispenser from the power outlet before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. For stubborn stains, use a mild, non-abrasive cleaner.
- Clean the drip tray and grill regularly. These parts are usually removable for easy washing with soap and water.
- Dry all surfaces thoroughly before plugging the dispenser back in.
Internal Cleaning (Flushing and Draining):
It is recommended to drain and flush the internal tanks every 3-6 months, or when changing water bottles if the dispenser will be stored.
- Unplug the dispenser and remove the water bottle.
- Place a large bucket or container under the drain plugs, typically located at the back or bottom of the unit.
- Carefully remove the drain plugs (often silicone caps) to allow all water to drain from the hot and cold tanks. Be cautious as hot water may still be present if recently used.
- Once drained, replace the drain plugs securely.
- Load a fresh water bottle and flush the system as described in the
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.