Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Globe Electric Clarissa 1-Light Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Clarissa Wall Sconce features a matte brass finish with a white pleated fabric shade, designed to provide ambient lighting. It requires one E12/candelabra base 60W bulb (sold separately) and is compatible with LED and incandescent bulbs. The fixture is dimmable when used with a compatible dimmer switch (also sold separately).
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- If you are unfamiliar with electrical wiring, consult a qualified electrician.
- Do not install this fixture in wet or damp locations. This product is designed for indoor use only.
- Use only the specified bulb type and wattage (E12/Candelabra Base, max 60W). Exceeding the maximum wattage may cause overheating and damage to the fixture.
- Always allow the bulb to cool before replacing it.
- Do not operate the fixture with a damaged cord or if it has been dropped or damaged in any way.
- Keep flammable materials away from the light fixture.
Package Contents
Verify that all components are present before beginning installation:
- Wall Sconce Fixture (Matte Brass)
- White Pleated Fabric Shade
- Mounting Hardware (Crossbar, mounting screws, wire nuts)
- Instruction Manual
Note: E12/Candelabra Base 60W bulb and dimmer switch are sold separately and are not included in this package.
Setup and Installation
Before you begin, ensure the power is turned off at the circuit breaker or fuse box.
Tools Required (Not Included):
- Phillips Head Screwdriver
- Wire Strippers
- Electrical Tape
- Safety Glasses
Installation Steps:
- Turn Off Power: Locate the circuit breaker or fuse box and turn off the power to the wall switch outlet box where you will install the fixture.
- Prepare Mounting Surface: If replacing an existing fixture, carefully remove it. Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
- Attach Mounting Crossbar: Secure the mounting crossbar to the electrical outlet box using the provided mounting screws. Ensure the crossbar is level.
- Make Electrical Connections:
- Connect the black wire from the fixture to the black (Live) wire from the outlet box using a wire nut.
- Connect the white wire from the fixture to the white (Neutral) wire from the outlet box using a wire nut.
- Connect the ground wire from the fixture to the ground wire from the outlet box (or to the green ground screw on the crossbar) using a wire nut.
Ensure all wire nuts are securely tightened and wrap connections with electrical tape for added safety.
- Mount the Fixture: Carefully tuck the wires into the outlet box. Align the fixture base with the mounting screws on the crossbar and secure the fixture in place with the decorative nuts or screws provided.
- Install Bulb: Screw one E12/candelabra base 60W max bulb (sold separately) into the socket. Do not overtighten.
- Attach Shade: Carefully place the white pleated fabric shade onto the fixture according to the design.
- Restore Power: Turn the power back on at the circuit breaker or fuse box. Test the fixture.
Image: Dimensions of the Clarissa Wall Sconce. The fixture measures approximately 14.84 inches (37.7 cm) in height, 9.48 inches (24.1 cm) in width, and extends 5.68 inches (14.4 cm) from the wall.
Image: Detailed view of the sconce, showing the matte brass arm and base, and the textured white pleated fabric shade.
Operating Instructions
Once installed and power is restored, operate the wall sconce using the wall switch connected to the fixture.
- Turning On/Off: Use the standard wall switch to turn the light fixture on or off.
- Dimmable Functionality: This fixture is fully dimmable. To utilize the dimming feature, you must install a compatible dimmer switch (sold separately) in place of a standard wall switch. Adjust the dimmer switch to achieve your desired light intensity.
- Bulb Selection: You can choose between lower wattage bulbs for a softer, more intimate glow or higher wattage bulbs (up to 60W) for brighter illumination, depending on your preference.
Image: The Clarissa Wall Sconce illuminating a living room, demonstrating its aesthetic and functional contribution to the space.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your wall sconce.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. The fabric shade can be gently dusted or spot cleaned with a damp cloth if necessary.
- Bulb Replacement: Ensure the power is off and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new E12/candelabra base 60W max bulb.
- Inspections: Periodically check all electrical connections and mounting hardware for tightness.
Troubleshooting
If your wall sconce is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Fixture is loose on the wall. |
|
|
If the problem persists after trying these solutions, contact a qualified electrician or Globe Electric customer support.
Specifications
- Model: Clarissa (65000083)
- Brand: Globe Electric
- Type: 1-Light Wall Sconce
- Finish: Matte Brass
- Shade Material: White Pleated Fabric
- Dimensions: 10.37" L x 9.5" W x 14.88" H (approx. 26.3 cm L x 24.1 cm W x 37.8 cm H)
- Bulb Base: E12 / Candelabra
- Max Wattage: 60W (per bulb)
- Bulb Type: Incandescent or LED (bulb not included)
- Voltage: 120V
- Dimmable: Yes, with compatible dimmer switch (sold separately)
- Installation Type: Wall Mount, Corded Electric
- Indoor/Outdoor Usage: Indoor only
- Item Weight: 1.03 Pounds (approx. 0.47 kg)
Warranty Information
According to product specifications, this Globe Electric Clarissa Wall Sconce (Model 65000083) is sold without a manufacturer's warranty. Please refer to the retailer's return policy for any issues upon purchase.
Support
For further assistance or inquiries regarding your Globe Electric product, please visit the official Globe Electric website or contact their customer service department.
Globe Electric Official Website: www.globe-electric.com
You may also refer to the Globe Electric store on Amazon for additional product information: Globe Electric Amazon Store
