Amazon Basics Universal TV Stand Instruction Manual

1. Introduction

Thank you for choosing the Amazon Basics Universal TV Stand. This stand is designed to provide a stable and versatile solution for mounting your television on a tabletop or furniture surface. It accommodates a wide range of TV sizes and offers height adjustability for optimal viewing.

This manual provides detailed instructions for assembly, operation, and maintenance to ensure safe and proper use of your TV stand.

Image: The Amazon Basics Universal TV Stand supporting a television, showcasing its sleek design.

2. Product Features

• Versatile Compatibility: Engineered to accommodate TVs ranging from 56 cm (22 inches) to 196 cm (77 inches) and supporting weights up to 36 kilograms (80 lbs).
• VESA Compliance: Seamlessly fits VESA mounting holes from 200 x 100mm (8"x4") up to 800 x 400 mm (31.5"x15.7") on the back of your TV. Note: This stand is not suitable for televisions with a VESA hole pattern less than 200mm wide.
• Adjustable Height: Offers 3 levels of height settings, ranging from 27.4" to 32.5", ensuring optimal viewing angles.
• Soundbar Integration: Features a detachable tab with durable metal materials, ideal for securely mounting a soundbar atop the stand, elevating it off the tabletop for a clean setup.
• Enhanced Stability: Crafted with extended feet for extra stability.
• Surface Protection: Equipped with 3mm soft pads on the base to safeguard your floor or cabinet surfaces against scratches.

Image: Overview of the TV stand's universal compatibility, weight capacity, and VESA size range.

3. Package Contents

Please verify that all components are present before beginning assembly. Refer to the assembly video for visual identification of parts.

Hardware Kit:

• Screws: M4 x 12mm (a), M4 x 30mm (b), M6 x 20mm (c), M6 x 35mm (d), M8 x 20mm (e), M8 x 35mm (f)
• Washers: M4 (g), M6 (h), M8 (i)
• Spacers: M4 (j), M6/M8 (K)
• Nuts: M6 (E), M8 (F)
• Allen Keys: G, H

Stand Components:

• Left Base (A1) & Right Base (B1)
• Left Support Arm (A2) & Right Support Arm (B2)
• Left Soundbar Bracket (A3) & Right Soundbar Bracket (B3)
• Left Upper Bracket (A4) & Right Upper Bracket (B4)
• Left Extension Bracket (A5) & Right Extension Bracket (B5)
• Left Soundbar Tab (A6) & Right Soundbar Tab (B6)

4. Safety Information

Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in property damage, serious injury, or death.

• Do not exceed the maximum weight capacity of 36 kg (80 lbs).
• Ensure your TV's VESA mounting pattern is compatible with the stand (200x100mm to 800x400mm).
• Always use the appropriate screws and washers for your TV's mounting holes. Refer to your TV's manual for correct screw length.
• Assemble the stand on a soft, clean surface to prevent scratches.
• Keep children and pets away during assembly. Small parts may be a choking hazard.
• Ensure all screws are securely tightened before placing the TV on the stand. Do not overtighten.
• Distribute the TV's weight evenly on the stand.
• Do not attempt to move the TV stand with the TV mounted on it without proper assistance.

5. Assembly Instructions

Follow these steps carefully for proper assembly. A Philips-head screwdriver (not included) is required in addition to the provided tools.

Assembly Video Guide:

1. Assemble the Base:
   • Attach the Left Support Arm (A2) to the Left Base (A1) using screws (C). Ensure the back side is aligned as shown in the diagram. Tighten with Allen Key (G).
   • Repeat for the Right Support Arm (B2) and Right Base (B1).
2. Attach Soundbar Brackets (Optional):
   • Secure the Left Soundbar Tab (A6) to the Left Base assembly using screws (C). Tighten with Allen Key (G).
   • Repeat for the Right Soundbar Tab (B6) and Right Base assembly.
3. Connect Upper Brackets:
   • Attach the Left Upper Bracket (A4) to the Left Support Arm (A2) using screws (D) and nuts (E). Tighten with Allen Key (H).
   • Repeat for the Right Upper Bracket (B4) and Right Support Arm (B2).
4. Attach Extension Brackets (for TVs > 55 inches / 140 cm):
   • If your TV is 55 inches or larger, attach the Left Extension Bracket (A5) to the top of the Left Upper Bracket (A4) using screws (F) and nuts (E). Ensure proper alignment. Tighten with Allen Key (H).
   • Repeat for the Right Extension Bracket (B5) and Right Upper Bracket (B4).
5. Determine Proper Screw Size for TV:
   • Based on your TV's mounting holes (VESA pattern), select the appropriate screws (a-f), washers (g-i), and spacers (j-K). Refer to your TV's manual for the correct screw length.
   • Install the selected combination of screws and washers into the TV's mounting holes.
   

   Image: Detailed illustration of supported VESA mounting patterns (Width*Height) from 200x100mm to 800x400mm.

6. Mount TV to Stand:
   • Carefully lift your TV and align the screws on the back of the TV with the vertical slots on the assembled TV stand brackets.
   • Slide the TV down until it is securely seated in the slots.
   • Ensure the TV is level and stable.

6. Operating Instructions

Height Adjustment:

The TV stand offers 3 levels of height adjustment to suit your viewing preference. To adjust the height:

1. With the TV removed from the stand, loosen the screws connecting the upper brackets to the support arms.
2. Slide the upper brackets up or down to the desired height setting.
3. Securely tighten all screws to lock the height in place.

Image: Visual representation of the three adjustable height levels for different TV sizes.

Soundbar Placement:

The detachable soundbar tabs allow for convenient placement of a soundbar directly beneath the TV, elevating it from the tabletop.

• Ensure a minimum height of 3.5 inches (8.87 cm) is available between the bottom of your TV and the tabletop to accommodate the soundbar.
• Place your soundbar on the integrated tabs after the TV is securely mounted.

Image: Illustration demonstrating the space provided for soundbar placement beneath the TV.

7. Maintenance

To ensure the longevity and safe operation of your TV stand, follow these maintenance guidelines:

• Cleaning: Wipe the stand with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish.
• Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure. Retighten if necessary.
• Damage Inspection: Inspect the stand regularly for any signs of wear, damage, or corrosion. If any damage is found, discontinue use and contact customer support.

8. Troubleshooting

If you encounter any issues with your TV stand, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

For warranty information and customer support, please refer to the official Amazon Basics documentation or visit the Amazon Basics website.

A copy of the warranty document can be found here: Warranty (PDF)