Introduction
This manual provides instructions for the assembly, operation, maintenance, and troubleshooting of your Bush Furniture Energize Electric Height Adjustable Desk. This desk is designed to allow users to easily switch between sitting and standing positions, promoting a more dynamic work environment.
Safety Information
Please read all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Ensure all components are securely fastened before use.
- Do not overload the desk. The maximum weight capacity is 120 pounds (54.43 kg).
- Keep hands and objects clear of moving parts during height adjustment.
- The desk features an anti-collision sensor. If an object is detected, the desk's movement will stop to prevent accidents.
- This product is intended for residential use.
- Refer to the included assembly instructions for detailed safety warnings specific to installation.
Package Contents
Verify that all components are present before beginning assembly. The package should include:
- 55W x 24D Electric Height Adjustable Standing Desk components (desktop, legs, motor, control panel, hardware).
- Assembly hardware and tools (if provided, otherwise refer to "Tools Recommended For Assembly").
Image: Exploded view of the desk highlighting key components like the two-piece melamine surface, up/down and memory control, anti-collision sensor, height range (27-45 inches), and adjustable levelers on metal legs.
Setup and Assembly
Assembly of the Bush Furniture Energize desk requires basic tools and careful attention to the included instructions. It is recommended to have two people for assembly.
Tools Recommended for Assembly:
- Hammer
- Screwdriver
Assembly Steps (General Overview):
- Unpack all components and verify against the parts list.
- Assemble the leg frames according to the detailed instructions provided in the separate assembly guide.
- Attach the electric motor and control panel to the desk frame.
- Secure the two-piece melamine desktop to the assembled frame.
- Connect all electrical cables as instructed.
- Place the desk in its desired location. Use the adjustable levelers on the metal legs to ensure stability on uneven floors.
Image: Technical drawing illustrating the desk's dimensions: 55.12 inches (140 cm) width, 23.62 inches (60 cm) depth, and an adjustable height range from 27.00 inches (68.58 cm) to 45.00 inches (114.30 cm).
Operating Instructions
Your Energize desk features an electric motor for smooth height adjustments and programmable memory presets.
Adjusting Desk Height:
- Locate the control panel, typically mounted on the underside of the desktop.
- Press the Up or Down buttons to raise or lower the desk to your desired height. The desk can adjust from 27 to 45 inches.
Using Memory Presets:
The desk allows you to save up to four preferred heights for quick adjustments.
- Adjust the desk to your desired height using the Up/Down buttons.
- Press the "M" button (Memory) followed by one of the numbered preset buttons (1, 2, 3, or 4). The display will confirm the preset is saved.
- To recall a saved height, simply press the corresponding numbered preset button.
Anti-Collision Sensor:
The desk is equipped with an anti-collision sensor. If the desk encounters an obstruction during height adjustment, it will automatically stop its movement to prevent damage or injury.
Image: Infographic providing ergonomic tips for using a sit-stand desk. It illustrates correct posture for sitting and standing, including recommended monitor distance (18-24 inches), keyboard/mouse placement, and foot/leg positioning for optimal comfort and health.
Maintenance
Proper care will ensure the longevity of your desk.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the melamine finish and PVC edge banding.
- Inspections: Periodically check all screws and fasteners to ensure they remain tight.
- Electrical Components: Keep the motor and control panel free from dust and moisture. Do not attempt to service electrical components yourself.
Troubleshooting
If you encounter issues with your desk, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected, motor error, or overload. |
|
| Desk stops unexpectedly during adjustment. | Anti-collision sensor activated. |
|
| Height presets are not working. | Presets not saved correctly or power interruption. |
|
For further assistance, please contact customer support.
Specifications
- Model Number: EZ155WHW-03
- Desktop Dimensions: 55 inches (140 cm) Width x 24 inches (60 cm) Depth
- Height Range: 27 inches (68.58 cm) to 45 inches (114.30 cm)
- Weight Capacity: 120 pounds (54.43 kg)
- Material: Engineered Wood (Desktop), Metal (Legs)
- Finish: Melamine with PVC edge banding
- Lifting Mechanism: Electric Motor
- Number of Height Presets: 4
- Special Features: Adjustable Height, Anti-collision Sensor
- Product Grade: Residential
- Item Weight: 27.22 kg
Warranty
This Bush Furniture Energize Electric Height Adjustable Desk is backed by a 3 Year Manufacturer's Warranty. Please refer to the product description or store page for full warranty details and terms.
Customer Support
For any questions, missing parts, or assistance, please reach out to Cymax at www.cymax.com for contact information.
