1. Introduction
Thank you for choosing the Parkside PKSA 40 Li B2 Cordless Chainsaw. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.
The Parkside PKSA 40 Li B2 is a powerful 40V cordless chainsaw designed for various cutting tasks. It features an innovative brushless motor for extended runtime and durability, adjustable chain speeds, and an automatic chain oiling system.

Image 1.1: Parkside PKSA 40 Li B2 Cordless Chainsaw. This image displays the complete chainsaw unit, highlighting its ergonomic design and key components such as the handle, chain, and guide bar.
2. Safety Instructions
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Read all instructions before operating this product.
- Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, hearing protection, gloves, and sturdy footwear.
- Work Area: Ensure the work area is clear of obstructions, well-lit, and free from bystanders, especially children and pets.
- Battery Safety: Use only recommended 20V (4 Ah) batteries (two required for operation) and chargers. Do not expose batteries to heat or direct sunlight.
- Chain Brake: Familiarize yourself with the chain brake mechanism for immediate chain stop in emergencies.
- Kickback Prevention: Be aware of kickback risks. Always maintain a firm grip with both hands and avoid cutting with the tip of the guide bar.
- Maintenance: Regularly inspect the chainsaw for damage, loose parts, or wear. Perform maintenance as described in this manual.
3. Setup
3.1 Unpacking and Assembly
Carefully remove all components from the packaging. Ensure all parts are present and undamaged. The chainsaw comes with a protective scabbard for the guide bar.
- Install Guide Bar and Chain: Follow the instructions in the separate assembly guide for proper installation of the guide bar and saw chain.
- Chain Tensioning: The chainsaw features tool-free rapid chain tensioning. Adjust the chain tension according to the instructions to ensure it is snug but can still be pulled freely by hand.
3.2 Battery Installation
This chainsaw requires two 20V (4 Ah) batteries from the Parkside X 20V Team series for operation. Batteries and charger are sold separately.
- Ensure batteries are fully charged before use.
- Insert both batteries into their respective slots until they click into place.
- Check the battery capacity indicator on the device to confirm power.
3.3 Filling the Chain Oil Reservoir
The chainsaw has an automatic chain oiling system. It is crucial to keep the oil reservoir filled with appropriate chain lubricant.
- Locate the oil tank cap (imperdable design) and unscrew it.
- Fill the reservoir with high-quality chainsaw chain oil.
- Monitor the oil level through the oil level window during operation.
- Securely replace the oil tank cap.
4. Operating Instructions
4.1 Starting and Stopping
- Starting: Engage the two-hand safety switch. The "soft start" feature ensures a smooth, jerk-free chain start.
- Stopping: Release the trigger switch. The chain will stop immediately (within < 0.12 seconds) due to the quick-stop chain brake.
4.2 Chain Speed Selection
The chainsaw offers two adjustable chain speeds:
- Level 1: 15 m/s (for lighter tasks or increased control)
- Level 2: 20 m/s (for faster cutting and heavier tasks)
Select the appropriate speed based on the material and cutting requirements.
4.3 Cutting Techniques
- General Cutting: Always ensure a stable stance. Hold the chainsaw firmly with both hands.
- Felling Grip: Utilize the felling grip for comfortable angled sawing.
- Metal Stop Claw: Use the robust metal stop claw to brace the chainsaw against the wood for improved stability and leverage during cuts.
- Avoid Kickback: Never cut with the tip of the guide bar. Always be aware of the position of the guide bar and potential kickback zones.
5. Maintenance
Regular maintenance ensures the longevity and safe operation of your chainsaw.
- Chain Sharpening: A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or replace it when dull.
- Chain Oiling: Continuously monitor the oil level via the window and refill as needed.
- Guide Bar Maintenance: Clean the guide bar groove and oil holes regularly. Flip the guide bar periodically to ensure even wear.
- Cleaning: After each use, clean the chainsaw housing, cooling vents, and chain area from sawdust and debris.
- Storage: Store the chainsaw with the protective scabbard in a dry, secure place, out of reach of children. Remove batteries before storage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chainsaw does not start. | Batteries not inserted correctly or discharged. Two-hand safety switch not engaged. | Ensure both batteries are fully charged and correctly inserted. Engage the two-hand safety switch. |
| Chain does not move or moves slowly. | Chain tension too tight. Chain dull or damaged. Low battery power. | Adjust chain tension. Sharpen or replace chain. Recharge or replace batteries. |
| No chain oil flow. | Oil reservoir empty. Oil passages blocked. | Refill oil reservoir. Clean oil passages and guide bar groove. |
| Excessive vibration. | Loose chain. Damaged chain or guide bar. | Adjust chain tension. Inspect and replace damaged components. |
7. Specifications
| Feature | Detail |
|---|---|
| Model | PKSA 40 Li B2 |
| Brand | Parkside |
| Motor Type | Brushless |
| Voltage | 40 V (2 x 20 V) |
| Recommended Batteries | 2 x 20 V (4 Ah) Parkside X 20V Team series (not included) |
| Chain Speed Level 1 | 15 m/s |
| Chain Speed Level 2 | 20 m/s |
| Cutting Length | Approx. 38 cm |
| Chain Stop Time | < 0.12 seconds |
| Dimensions (L x W x H) | Approx. 80 x 21.5 x 25 cm |
| Weight (without batteries) | Approx. 3.6 kg |
| Included Accessories | 1 protective scabbard for guide bar |
8. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact Parkside customer service. Keep your proof of purchase for warranty claims.
Note: Spare parts availability information is not provided in the product details.