Ingenuity Prop Spot Learn-to-Sit Floor Seat (Model 16930) - Casi User Manual

1. Product Overview

The Ingenuity Prop Spot Learn-to-Sit Floor Seat is designed to support infants aged 4-12 months who can hold their head up unassisted, until they can walk. This versatile seat offers three positions to accommodate your baby's developmental stages, allowing them to play and observe their surroundings comfortably.

Figure 1: Ingenuity Prop Spot Learn-to-Sit Floor Seat, Casi design.

Key Features:

• 3-position adjustable seat to grow with your baby.
• Removable seat insert that converts to a tummy time mat.
• Removable tray for snacks or toys.
• Two linkable toys (giraffe and plant leaf) for engagement.
• Folds flat for convenient storage and portability.
• Machine-washable seat pad for easy cleaning.

2. Setup and Assembly

The Ingenuity Prop Spot Learn-to-Sit Floor Seat comes largely pre-assembled. Follow these steps for initial setup and adjustment:

1. Unfolding the Seat: Place the seat on a flat, stable surface. Press the white buttons on each side of the seat base simultaneously and lift the backrest until it locks into an upright position. Ensure both sides are securely locked.
2. Adjusting Seat Height: The seat offers multiple height positions. To adjust, press the white buttons on the side of the seat base and gently push or pull the backrest to the desired height. Release the buttons to lock the position.
3. Attaching the Tray: Align the tray with the slots on the front of the seat and push down until it clicks securely into place. To remove, press the release tabs on the underside of the tray and lift.
4. Attaching Toys: The two included linkable toys can be attached to the loops on the tray or seat frame to keep your baby engaged.

Figure 2: The seat folds flat for easy storage.

Figure 3: The tray can be conveniently stored under the seat.

Official Product Video: Setup & Features

Video 1: This official video demonstrates the setup, features, and various uses of the Ingenuity Prop Spot Learn-to-Sit Floor Seat, including its adjustability and portability.

3. Operating Instructions

The Ingenuity Prop Spot Learn-to-Sit Floor Seat is designed for babies who can hold their head up unassisted (approximately 4 months) until they can walk (approximately 12 months or up to 33 lbs).

Using the Seat:

• Always place the seat on a flat, level surface.
• Ensure your baby is securely fastened with the built-in safety harness.
• Supervise your baby at all times while they are in the seat.
• The seat back features the adorable Casi the zebra character, providing comfort and support.

Figure 4: Baby in the lower position, suitable for younger infants.

Figure 5: The seat can be adjusted to two upright positions as the baby grows.

Tummy Time Mat Function:

The seat insert is removable and can be used independently as a tummy time mat. This mat features crinkle textures, two toys (giraffe and plant leaf), and three colorful tags to stimulate and entertain your baby during tummy time.

Figure 6: The Casi the Zebra seat insert is removable for tummy time play.

4. Maintenance and Care

Proper care ensures the longevity and hygiene of your Ingenuity Prop Spot Learn-to-Sit Floor Seat.

Cleaning Instructions:

• Frame: Wipe the frame with a soft, clean cloth and mild soap.
• Seat Pad: Remove toys before washing. Machine wash with cold water on a gentle cycle. Do not use bleach. Air dry.
• Toys: Clean before use with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Tray: Clean before use with a damp cloth and mild soap. Air dry.

Figure 7: The seat pad and insert are machine-washable for easy cleaning.

5. Troubleshooting

If you encounter any issues with your Ingenuity Prop Spot Learn-to-Sit Floor Seat, please review the following common solutions:

• Seat not locking into position: Ensure both white buttons on the side of the base are fully depressed when adjusting the seat, and release them only when the desired position is reached and you hear a click, indicating it's securely locked.
• Tray not attaching securely: Verify that the tray is correctly aligned with the slots on the seat frame and push firmly until it clicks into place. Check for any obstructions.
• Difficulty folding flat: Ensure the seat is in its lowest position before attempting to fold. Press both side buttons and gently push the backrest down until it lies flat.

For further assistance, please refer to the contact information provided in the Warranty and Support section.

6. Specifications

7. Warranty and Support

Specific warranty details for the Ingenuity Prop Spot Learn-to-Sit Floor Seat are not provided in the available product information. For warranty claims, product support, or to inquire about replacement parts, please contact Ingenuity customer service directly through their official website or the retailer where the product was purchased.