Introduction
The UPPAbaby Aria Lightweight Infant Car Seat is engineered for safety and convenience, weighing just under 6 lbs. This manual provides essential information for the proper installation, use, and maintenance of your Aria infant car seat and its accompanying base. Please read all instructions carefully before use and retain this manual for future reference.
Figure 1: UPPAbaby Aria Lightweight Infant Car Seat with Base.
Safety Information
Always prioritize your child's safety. Ensure the car seat is installed correctly according to this manual and vehicle instructions. Never leave a child unattended in the car seat. Always use the harness system and ensure it is properly tightened. Refer to all warning labels on the product for critical safety information.
The Aria features an Anti-Rebound+ Panel and a 5th anti-rebound handle position for increased safety in rebound and rear-impact collisions. The adjustable headrest is reinforced with EPP foam for energy absorption and side impact protection.
What's Included
Your UPPAbaby Aria Lightweight Infant Car Seat package includes the following components:
- Aria Infant Car Seat Carrier
- Infant Car Seat Base with Load Leg
- Two-Piece Robust Infant Insert
Figure 2: Included components: Car Seat Carrier, Base, and Two-Piece Infant Insert.
Setup
Infant Insert Usage
The two-piece robust infant insert is designed to optimize fit and body positioning for infants between 4 lbs (1.8 kg) and approximately 9 lbs (4.1 kg), and up to 4 months. Ensure the harness straps are at or slightly below the child's shoulders, the chest clip is at armpit level, and the crotch buckle rests securely against the child with no gaps. Perform the pinch test to ensure proper harness tightness.
Video 1: Demonstrates child fit with both infant insert pieces.
Car Seat Base Installation
The included base features the SmartSecure System with a red-to-green visual indicator for quick and secure installation. It also includes Auto-Retracting LATCH connectors and a built-in lock-off for secure seatbelt installation. Use the four-position adjustable foot for easy leveling and refer to the bubble level indicators on both sides to confirm correct positioning.
European Routing (without base)
For installation without the base, the Aria supports European Routing, providing a secure installation using only the vehicle's seatbelt. Follow the detailed instructions provided on the car seat labels and in the full instruction manual for proper routing and tensioning.
Operating
Harness Adjustment
The Aria features a no-rethread, 5-point harness system with an adjustable headrest, allowing for a customized fit as your child grows. The simple one-crotch buckle position makes securing your child straightforward.
Canopy Usage
The extra-large UPF 25+ hideaway canopy includes back panel ventilation and a pop-out extended sunshade. This provides intuitive airflow and sun protection, and can be easily retracted when not needed.
Travel System Compatibility
The Aria infant car seat directly attaches to UPPAbaby Vista and Cruz strollers, creating a seamless travel system. It is also compatible with Minu, Minu Duo, and Ridge strollers with the addition of convenient adapters (sold separately).
Figure 3: Aria compatibility with various UPPAbaby strollers.
Video 2: Demonstrates transitioning the Aria car seat from stroller to car and vice versa.
Maintenance
Cleaning Instructions
The Aria car seat features removable, machine-washable fabrics. All fabrics are Fire Retardant Free through DualTech™ fabrics. For cleaning, machine wash in warm water on a gentle cycle with mild detergent. Do not bleach. Dry flat and away from direct sunlight before re-use or storage. Do not iron or dry clean.
Figure 4: CleanTech™ Collection of Fabrics, free from fire retardant chemicals.
Troubleshooting
If you encounter any issues with your UPPAbaby Aria car seat, please refer to the comprehensive troubleshooting guide in the full product manual. Common issues and solutions include:
- Harness Adjustment: Ensure the harness is free of twists and the adjuster strap moves smoothly.
- Installation Issues: Verify the SmartSecure indicator is green. Re-check LATCH or seatbelt routing and tension.
- Stroller Attachment: Ensure the car seat is correctly aligned and clicks securely into the stroller adapters or frame.
For further assistance, contact UPPAbaby customer support.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 28.8 x 17 x 36.5 inches |
| Minimum Weight Recommendation | 4 Pounds |
| Maximum Weight Recommendation | 30 Pounds |
| Maximum Height Recommendation | 30 Inches |
| Material Type | Polyester |
| Harness Type | 5-Point |
| Orientation | Rear Facing |
| Item Weight (Carrier) | 5.9 lbs |
| Item Weight (Base) | 12.6 lbs |
| Additional Features | SmartSecure system, Anti-Rebound+ Panel, Extra-large canopy, Load leg |
Figure 5: Detailed specifications for the Aria car seat and base.
Warranty and Support
For detailed warranty information and customer support, please refer to the official UPPAbaby website or the warranty card included with your product. UPPAbaby is committed to providing high-quality products and support for its customers.
