1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your MEndip Universal Motorcycle Windscreen. Please read these instructions carefully before installation and retain them for future reference.
The MEndip Universal Motorcycle Windscreen is designed to enhance rider comfort and safety by deflecting wind, rain, debris, and insects. Its V-shaped profile contributes to a more comfortable riding experience and improved road safety.
2. Safety Information
- Always ensure all components are securely fastened before riding. Loose parts can pose a safety hazard.
- Regularly inspect the windscreen and mounting hardware for any signs of wear, damage, or loosening.
- Do not attempt to modify the windscreen or its mounting brackets, as this may compromise its structural integrity and performance.
- Ensure the windscreen does not obstruct your view or interfere with the motorcycle's controls.
3. Setup and Installation
The MEndip Universal Motorcycle Windscreen is designed for straightforward installation without the need for drilling or complex modifications. The mounting brackets are adjustable to fit various handlebar configurations.
3.1. Package Contents
- 1 x MEndip Motorcycle Windshield
- Mounting Brackets and Hardware
3.2. Installation Steps
- Prepare the Motorcycle: Park your motorcycle on a stable, level surface. Ensure the engine is off and the ignition key is removed.
- Assemble the Windscreen: Attach the clear ABS plastic windscreen to the main horizontal bracket using the provided screws and washers. Ensure a snug fit but do not overtighten.
- Attach Mounting Arms: Secure the two curved mounting arms to the ends of the horizontal bracket. These arms will connect to your motorcycle's handlebars.
- Position on Handlebars: Place the assembled windscreen and bracket system onto your motorcycle's handlebars. The installation bracket distance is adjustable between 38 to 41 cm (15-16 inches) to accommodate various handlebar widths.
- Secure to Handlebars: Use the provided clamps and hardware to firmly attach the mounting arms to the handlebars. Adjust the angle and height of the windscreen to your preferred position, ensuring it does not interfere with steering or controls.
- Final Tightening: Once the desired position is achieved, carefully tighten all screws and bolts. Double-check all connections to ensure they are secure.
Image 1: The MEndip Universal Motorcycle Windscreen showing the clear ABS plastic shield and the black mounting bracket assembly.
Image 2: A motorcycle with the MEndip Windscreen installed, demonstrating how the bracket attaches to the handlebars and the overall appearance.
Image 3: A close-up view of the MEndip Windscreen mounted on a motorcycle, highlighting the attachment points on the handlebars and the clear shield.
4. Operating Instructions
Once properly installed, the MEndip Universal Motorcycle Windscreen operates passively to provide protection and comfort during your ride.
- The V-shaped profile is engineered to redirect airflow, reducing wind pressure on the rider and minimizing wind noise, especially at higher speeds.
- The transparent ABS plastic acts as a barrier against environmental elements such as rain, dust, small debris, and insects, enhancing rider visibility and comfort.
- No specific operational controls are required for the windscreen itself; its function is continuous once installed.
5. Maintenance
Proper maintenance will ensure the longevity and clarity of your MEndip Universal Motorcycle Windscreen.
- Cleaning: Clean the windscreen regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, harsh chemicals, or rough sponges, as these can scratch the ABS plastic. Rinse thoroughly with clean water and dry with a soft, lint-free cloth.
- Inspection: Periodically check all mounting hardware for tightness. Vibrations from riding can cause bolts to loosen over time. Tighten any loose fasteners immediately.
- Damage: If the windscreen becomes cracked or severely scratched, it is recommended to replace it to maintain optimal visibility and protection.
6. Troubleshooting
Should you encounter any issues with your MEndip Universal Motorcycle Windscreen, consider the following common solutions:
- Excessive Vibration: Ensure all mounting bolts and screws are securely tightened. Check if the windscreen is properly aligned and not making contact with other parts of the motorcycle.
- Reduced Wind Protection: Verify that the windscreen is angled correctly. Adjust its position slightly to optimize wind deflection for your riding posture.
- Obstructed View: Re-adjust the windscreen's height and angle to ensure it does not impede your line of sight.
7. Specifications
| Brand | MEndip |
| Model | MEndip |
| Material | ABS Plastic |
| Color | Transparent |
| Windscreen Height | 37 cm (14.56 inches) |
| Installation Bracket Distance | 38 to 41 cm (15-16 inches) |
| Fitment | Universal |
| Item Weight | 0.75 kg (1.65 pounds) |
| Number of Pieces | 1 |
8. Warranty Information
Warranty information for the MEndip Universal Motorcycle Windscreen is not provided in the product details. Please refer to your point of purchase or the manufacturer's official website for any available warranty terms and conditions.
9. Support
Specific customer support contact information is not provided in the product details. For assistance, please contact the seller through the platform where the product was purchased.
