Oakley FOS900642
Contents
Oakley MOD7 Helmet User Manual
Model: FOS900642
1. Introduction
The Oakley MOD7 Helmet is engineered to provide a seamless and integrated experience for all-mountain skiing and snowboarding. Designed for both inbound and off-piste adventures, it combines advanced protection with innovative optics integration. The Visionary Secure-Connect technology ensures a cohesive design between the helmet and its Prizm Lens Technology visor, adapting to various conditions and terrains.

Figure 1: Front view of the Oakley MOD7 Helmet with integrated Prizm visor.
Key features include:
- Hybrid Shell Construction: Offers durability and lightweight performance.
- BOA Fit System: Provides precise, 360-degree adjustability for a secure and comfortable fit.
- Integrated Visor with Prizm Lens Technology: Enhances contrast and visibility in various light conditions.
- Advanced Ventilation: Front, top, and rear ventilation chambers for optimal airflow.
- Safety Ratings: Certified to ASTM F2040 and CE EN1077 standards.
2. Safety Information
Always prioritize safety when using your Oakley MOD7 Helmet. This helmet is designed to reduce the risk of head injury in certain impacts, but it cannot protect against all possible impacts or prevent injury in all accidents. Proper fit and maintenance are crucial for optimal protection.
- Proper Fit: Ensure the helmet fits snugly and comfortably. It should not move freely on your head.
- Strap Adjustment: Always fasten the chin strap securely. The strap should be tight enough so that the helmet cannot be pulled off your head.
- Visor Use: Ensure the visor is clean and free from obstructions for clear vision.
- Damage Inspection: Inspect your helmet for any signs of damage before each use. If the helmet has sustained an impact, even if no visible damage is present, it should be replaced.
- Chemical Exposure: Avoid exposing the helmet to petroleum products, cleaning fluids, paints, adhesives, or other chemicals, as they can damage the helmet's materials and compromise its protective capabilities.
- Helmet Lifespan: Helmets have a limited lifespan. Consult Oakley's official guidelines for recommended replacement intervals.
WARNING: No helmet can protect the wearer from all foreseeable impacts. For maximum protection, the helmet must be fitted and attached properly to the wearer's head in accordance with the manufacturer's instructions.
3. Setup and Fitting
Achieving a proper fit is essential for the performance and safety of your MOD7 Helmet.
3.1 Initial Fit Adjustment
- Place Helmet on Head: Position the helmet squarely on your head, ensuring it covers your forehead.
- Adjust BOA Fit System: Locate the BOA dial at the rear of the helmet. Turn the dial clockwise to tighten the fit system, drawing the helmet snugly around your head. Turn counter-clockwise to loosen. Adjust until the helmet feels secure without uncomfortable pressure points.
- Shake Test: With the chin strap unfastened, shake your head gently from side to side and front to back. The helmet should remain stable with minimal movement.

Figure 2: Rear view of the Oakley MOD7 Helmet, highlighting the BOA Fit System dial.
3.2 Chin Strap Adjustment
- Buckle the Strap: Fasten the chin strap buckle securely under your chin.
- Adjust Strap Length: Tighten the strap until it is snug but comfortable. You should be able to fit one to two fingers between the strap and your chin.
- Ear Straps: Ensure the strap dividers are positioned just below your ears, forming a "V" shape.
3.3 Visor Adjustment and Secure-Connect Technology
The MOD7 features Visionary Secure-Connect technology for seamless visor integration.
- Visor Position: The visor can be moved up or down to accommodate different face shapes and preferences. Gently slide the visor along its tracks to adjust its position.
- Secure Connection: The visor is designed to integrate flush with the helmet shell when in the down position, providing a wide field of view and protection.
- Lens Replacement: Refer to Oakley's official instructions or a qualified dealer for specific lens replacement procedures, if applicable.

Figure 3: Front view of the Oakley MOD7 Helmet, showcasing the integrated visor and overall design.
4. Operating the Helmet
4.1 Ventilation System
The MOD7 Helmet features a sophisticated ventilation system to manage airflow and temperature.
- Ventilation Chambers: The helmet incorporates front, top, and rear ventilation chambers.
- Adjusting Vents: Specific models may feature adjustable vents. Locate any sliders or switches on the helmet's exterior to open or close the vents as needed to regulate airflow and prevent overheating or excessive cold.
4.2 Visor Usage
The integrated visor provides optical clarity and protection.
- Lowering/Raising Visor: Gently push or pull the visor to move it into the desired position. Ensure it clicks securely into place when fully lowered or raised.
- Anti-Fogging: The Prizm lens is designed to resist fogging. Ensure proper ventilation and avoid breathing directly onto the inner surface of the lens.
5. Maintenance and Care
Proper care will extend the life of your Oakley MOD7 Helmet and maintain its performance.
5.1 Cleaning the Helmet Shell
- Use a soft cloth or sponge with mild soap and lukewarm water.
- Gently wipe the exterior of the helmet.
- Rinse thoroughly with clean water and air dry in a cool, shaded area.
- Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage the helmet's finish and materials.
5.2 Cleaning the Visor
- Rinse the visor with clean water to remove loose dirt or debris.
- Use a soft, lint-free cloth and a specialized lens cleaning solution (or mild soap and water) to gently clean the lens.
- Avoid wiping the inner surface of the lens vigorously, especially if it has an anti-fog coating. Blot gently if necessary.
- Air dry or gently blot with a clean, soft cloth.
5.3 Interior Padding
- Some interior padding may be removable for washing. Refer to Oakley's specific instructions for your helmet model.
- If removable, hand wash with mild soap and water, then air dry completely before reinserting.
5.4 Storage
- Store the helmet in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid storing the helmet near heat sources or chemicals.
- Use a helmet bag (if provided) to protect it from scratches and dust.
6. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Helmet feels loose or shifts | Improper BOA Fit System adjustment; chin strap too loose. | Tighten the BOA dial. Adjust and secure the chin strap. Ensure proper helmet size. |
| Visor fogging | Insufficient ventilation; extreme temperature/humidity changes; dirty lens. | Ensure vents are open. Clean the visor. Avoid breathing directly onto the inner lens. |
| Discomfort or pressure points | Helmet too tight; incorrect sizing; improper positioning. | Loosen BOA dial slightly. Re-position helmet. Verify correct helmet size for your head circumference. |
| Visor not moving smoothly | Debris in tracks; mechanism issue. | Inspect tracks for debris and gently clean. Do not force movement. If issue persists, contact support. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | MOD7 Helmet |
| Model Number | FOS900642 |
| Construction | Hybrid Shell |
| Adjustability | BOA Fit System |
| Venting | Front, top, and rear ventilation chambers |
| Safety Ratings | ASTM F2040 and CE EN1077 |
| Available Sizes | S (51-55cm), M (55-59cm), L (56-61cm) |
| Outer Material | Plastic |
| Color | Blackout/Przmsphir/Prizm Clr |
| Item Weight | 1.9 kg |
| Parcel Dimensions | 36.5 x 27.2 x 26.19 cm |
8. Warranty and Support
For detailed warranty information regarding your Oakley MOD7 Helmet, please refer to the official Oakley website or contact an authorized Oakley dealer. Warranty terms and conditions may vary by region and product.
If you encounter any issues not covered in this manual or require further assistance, please contact Oakley Customer Service through their official channels. Ensure you have your product model number (FOS900642) and purchase details available when seeking support.
For more information, visit the Oakley Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.