FLEX 24V Brushless Cordless Oscillating Multi-Tool Kit FX4111-1A User Manual

Introduction

This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your FLEX 24V Brushless Cordless Oscillating Multi-Tool Kit, model FX4111-1A. This versatile tool is designed for cutting, trimming, plunging, sanding, grinding, and scraping applications. Please read this manual thoroughly before using the tool to ensure proper and safe operation.

Safety Information

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools.

• Work Area Safety: Keep the work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Electrical Safety: Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions.
• Personal Safety: Always wear eye protection. Use hearing protection when operating the tool for extended periods. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
• Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs.

Package Contents

Verify that all items are present upon unpacking:

• FLEX 24V Brushless Cordless Oscillating Multi-Tool (FX4111-1A)
• 2.5Ah Lithium-Ion Battery
• 160W Fast Charger
• Instruction Manual
• Carrying Bag (as depicted in product images)
• Initial Oscillating Blade (may vary)

Figure 1: The FLEX 24V Brushless Cordless Oscillating Multi-Tool Kit, including the multi-tool, a 2.5Ah battery, a 160W fast charger, and a carrying bag.

Product Features

The FLEX 24V Oscillating Multi-Tool incorporates several advanced features for enhanced performance and user experience:

• FLEX Advantage: Utilizes 24V lithium battery technology for increased power, extended runtime with THERMA-TECH heat management, and faster charging capabilities.
• Sensor-Free Brushless Motor: Designed for higher efficiency and power by eliminating friction.
• Fast Cutting: Achieves up to 20,000 Oscillations Per Minute (OPM) for efficient material removal.
• Vibration Suppression: Advanced system to isolate the tool and user from excessive vibration, improving comfort and control.
• 3D Starlock Connection: Maximizes power transfer from the motor to the blade for optimal oscillating efficiency.
• Keyless Blade Eject: Facilitates quick and easy blade changes without direct contact with potentially hot blades.
• LED Light: Integrated lighting to illuminate dark work areas, enhancing visibility.
• FLEX 24V Cross-Compatibility: The included 2.5Ah Lithium-Ion Battery and 160W Fast Charger are compatible with all FLEX 24V tools.

Figure 2: Illustration of the FLEX Advantage, detailing the benefits of the 24V lithium battery system.

Figure 3: The multi-tool in operation, demonstrating its fast cutting capability at 20,000 OPM.

Figure 4: The multi-tool being used, highlighting its vibration suppression technology for user comfort.

Figure 5: A detailed view of the 3D Starlock connection, designed for maximum power transfer to the blade.

Figure 6: The keyless blade eject mechanism in action, allowing for quick and safe blade changes.

Figure 7: The integrated LED light on the multi-tool, providing illumination for dark work areas.

Setup

1. Charging the Battery

1. Connect the 160W Fast Charger to a standard power outlet.
2. Slide the 2.5Ah Lithium-Ion Battery onto the charger until it clicks into place.
3. Monitor the charger's indicator lights for charging status. A full charge is indicated when all lights are solid green.
4. Once fully charged, remove the battery from the charger.

2. Installing/Changing Blades

1. Ensure the tool is switched off and the battery pack is removed before installing or changing accessories.
2. Locate the 3D Starlock connection on the tool head.
3. Align the accessory (blade, sanding pad, etc.) with the Starlock connection.
4. Press the accessory firmly onto the connection until it clicks securely into place. The 3D Starlock system ensures a tight fit and optimal power transfer.
5. To remove an accessory, activate the Keyless Blade Eject mechanism (refer to your tool's specific design for the lever or button) and pull the accessory away from the tool head.

Operating Instructions

1. Powering On/Off

• Insert a charged 24V battery pack into the tool handle until it locks.
• To turn the tool ON, slide the power switch to the 'ON' position or depress the trigger, depending on the tool's design.
• To turn the tool OFF, release the trigger or slide the power switch to the 'OFF' position.

2. Adjusting Speed

The tool features variable speed control, allowing adjustment of OPM (Oscillations Per Minute) for different applications. Locate the speed adjustment dial or switch on the tool and set it to the desired speed. Lower speeds are suitable for delicate work or softer materials, while higher speeds are for aggressive material removal.

3. General Operation Guidelines

• Cutting: Select the appropriate blade for the material. Apply light, consistent pressure. Allow the tool to do the work; do not force it.
• Sanding: Attach a sanding pad and appropriate grit sandpaper. Move the tool in a consistent pattern across the surface to achieve an even finish.
• Scraping: Use a scraping blade. Hold the tool at a shallow angle to the surface and apply steady pressure to remove material.
• LED Light: The integrated LED light activates when the tool is in operation, providing illumination for the work area.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your tool.

• Cleaning: After each use, clean the tool with a soft, damp cloth. Remove any dust or debris from ventilation openings. Do not use harsh chemicals or abrasive cleaners.
• Blade Inspection: Regularly inspect blades and accessories for wear or damage. Replace worn or dull blades to maintain cutting efficiency and safety.
• Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods.
• Storage: Store the tool, battery, and charger in a dry, secure location out of reach of children.

Troubleshooting

Specifications

Warranty and Support

The FLEX 24V Brushless Cordless Oscillating Multi-Tool Kit is protected by the FLEX Limited Lifetime Warranty. To activate this warranty, you must register your new FLEX tool, battery, or charger within 30 days of purchase. Registration can be completed online at registermyFLEX.com. This offer is valid for purchases made through December 31, 2025.

For further assistance, technical support, or warranty claims, please refer to the official FLEX website or contact their customer service department.