1. Introduction
Thank you for purchasing the Klipsch Flexus SUB 100 10" Wireless Subwoofer. This subwoofer is designed to deliver powerful, deep bass and is an exclusive component of the Klipsch Flexus Sound System, compatible only with Flexus CORE 100 and CORE 200 Sound Bars. Engineered with Klipsch Transport Technology, it ensures seamless integration and superior audio performance for your home entertainment setup.
2. Important Safety Instructions
Please read all safety instructions carefully before operating this product. Keep these instructions for future reference.
- Power Source: Connect the subwoofer only to the specified power supply as indicated in the specifications.
- Ventilation: Ensure adequate ventilation around the subwoofer. Do not block any ventilation openings.
- Water & Moisture: Do not expose the subwoofer to water, moisture, or excessive humidity. Do not place objects filled with liquids on or near the unit.
- Heat: Keep the subwoofer away from heat sources such as radiators, heat registers, stoves, or other heat-producing appliances.
- Cleaning: Clean only with a dry cloth. Avoid using liquid cleaners or aerosols.
- Placement: Place the subwoofer on a stable, level surface to prevent it from falling. Avoid placing near routers to prevent potential interference.
- Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
3. What's in the Box
Your Klipsch Flexus SUB 100 package includes:
- Klipsch Flexus SUB 100 Wireless Subwoofer
- Power Cable
- USB Pre-Paired Dongle (for wireless connectivity)
4. Product Overview
The Klipsch Flexus SUB 100 is a compact yet powerful 10-inch wireless subwoofer designed to enhance your home theater experience with deep, rich bass. It features a high-excursion paper cone woofer and is powered by Onkyo engineering, ensuring robust and clear low-frequency reproduction.
5. Setup & Connectivity
The Flexus SUB 100 is designed for simple, wireless setup with your Klipsch Flexus Sound Bar.
5.1 Initial Connection
- Placement: Position the subwoofer in your desired location. Klipsch recommends placing it near your Flexus sound bar or in a corner for optimal bass response.
- Power: Connect the power cable to the subwoofer and then to a wall outlet.
- Wireless Pairing: The subwoofer utilizes a USB Pre-Paired Dongle for wireless communication with your Flexus sound bar. Ensure the dongle is properly connected to your sound bar. The subwoofer should automatically pair.
- Verification: A status indicator light on the subwoofer will confirm successful pairing. Refer to your sound bar's manual for specific pairing indicators.
5.2 Advanced Setup (via Klipsch Connect Plus App)
For fine-tuning and advanced control, use the Klipsch Connect Plus app:
- Download App: Download the Klipsch Connect Plus app from your device's app store.
- Connect: Follow the in-app instructions to connect your Flexus Sound System, including the SUB 100.
- Adjustments: The app allows you to control:
- Gain: Adjust the overall volume level of the subwoofer.
- Low-Pass Filter (Hz): Set the crossover frequency to blend the subwoofer's output with your sound bar.
- Phase: Adjust the phase (0° or 180°) to ensure the subwoofer's output is in sync with your main speakers.
- Power Mode: Select between ON, AUTO (subwoofer turns on/off with audio signal), or OFF.
6. Operating Instructions
Once set up, the Klipsch Flexus SUB 100 operates seamlessly with your Flexus Sound Bar. Most day-to-day adjustments will be made through the Klipsch Connect Plus app or your sound bar's remote control.
- Power On/Off: The subwoofer can be set to automatically power on/off with your sound bar (AUTO mode) or manually controlled via the app or the physical switch on the rear panel.
- Volume Control: Adjust the subwoofer's volume independently or as part of the overall system volume through the Klipsch Connect Plus app.
- Sound Modes & EQ: Utilize the app to select various EQ presets, customize your personal EQ mix, enable Night Mode, or enhance dialogue for specific content.
7. Maintenance
To ensure the longevity and optimal performance of your Klipsch Flexus SUB 100, follow these simple maintenance guidelines:
- Cleaning: Regularly wipe the exterior surfaces with a soft, dry cloth. Avoid abrasive cleaners, waxes, or solvents.
- Dust: Use a soft brush or vacuum cleaner with a brush attachment to gently remove dust from the speaker grille and driver.
- Ventilation: Keep the rear panel and any ventilation ports clear of obstructions to prevent overheating.
- Storage: If storing the subwoofer for an extended period, disconnect it from power and store it in a cool, dry place.
8. Troubleshooting
If you encounter issues with your Klipsch Flexus SUB 100, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from subwoofer | Subwoofer not powered on; Not paired with sound bar; Volume too low; Incorrect phase setting. | Check power connection and power mode (ON/AUTO). Verify successful wireless pairing. Increase subwoofer volume via app. Adjust phase setting (0°/180°) in the app. |
| Distorted or muddy bass | Volume too high; Incorrect low-pass filter setting; Poor placement. | Lower subwoofer volume. Adjust the low-pass filter in the app for a smoother blend. Experiment with subwoofer placement to reduce room modes. |
| Background noise or clicking | Interference from other electronic devices (e.g., Wi-Fi router). | Relocate the subwoofer further away from potential sources of interference like Wi-Fi routers. |
| Subwoofer not connecting to app | Bluetooth/Wi-Fi issues; App malfunction. | Ensure your mobile device's Bluetooth/Wi-Fi is enabled. Restart the app and the subwoofer. Re-attempt pairing through the app. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Name | Flexus SUB 100 |
| Speaker Type | Subwoofer |
| Subwoofer Diameter | 10 Inches |
| Speaker Maximum Output Power | 80 Watts |
| Frequency Response | 20 KHz (upper limit, lower limit not specified but designed for deep bass) |
| Connectivity Technology | Wireless (Klipsch Transport), USB Pre-Paired Dongle |
| Control Method | App (Klipsch Connect Plus) |
| Product Dimensions | 13.75"D x 13.19"W x 13.38"H |
| Item Weight | 28 Pounds |
| Material | MDF, Vinyl |
| Color | Ebony |
| Compatible Devices | Flexus sound bars (CORE 100, CORE 200) |
10. Warranty & Support
The Klipsch Flexus SUB 100 comes with a Limited Warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Klipsch website.
10.1 Customer Support
For technical assistance, troubleshooting, or service inquiries, please contact Klipsch Customer Support:
- Website: www.klipsch.com/support
- Phone: Refer to the Klipsch website for regional contact numbers.
